DOOYA DM25TE Series

Contents

DOOYA DM25TE Series Tubular Motor

User Instruction Manual

1. Introduction

Thank you for choosing the DOOYA DM25TE Series Tubular Motor. This motor is designed for intelligent control of electric roller blinds and soft gauze curtains, bringing convenience and smart functionality to your home. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your motor.

DM25TE Tubular Motor with mounting bracket and cable, shown next to a curtain, indicating its application.
Figure 1: DM25TE Tubular Motor in application context.

2. Safety Information

Please read all safety instructions carefully before installation and operation to prevent injury or damage to the product. Keep this manual for future reference.

  • Ensure the power supply matches the motor's specifications (100-240V, 50/60Hz).
  • Installation should be performed by a qualified professional or under strict supervision.
  • Do not allow children to play with fixed controls or remote controls.
  • Keep hands and loose clothing clear of the blind/curtain during operation.
  • Disconnect power before performing any maintenance or adjustments.
  • The motor is rated IP44, providing protection against solid objects larger than 1mm and splashing water from any direction.

3. Product Overview

The DM25TE series motor is a compact tubular motor designed to fit within the roller tube of blinds or curtains. It features a built-in transformer and electronic radio for remote control operation.

Full view of the DM25TE tubular motor with its power cable and end cap.
Figure 2: DM25TE Tubular Motor.
Close-up of the DM25TE motor's label, showing model DM25TE-0.7/20, AC Electronic Radio, voltage, power, current, frequency, diameter, and IP44 rating.
Figure 3: Motor label with specific variant information (e.g., DM25TE-0.7/20).

4. Installation

The DM25TE motor is designed for integration into roller blind or curtain systems. The installation process typically involves mounting the motor within the roller tube and securing the assembly to the window frame or wall.

4.1 Components and Outline

Detailed technical diagram of the DM25TE motor, including outline dimensions, internal structure, motor type explanation table, and technical data table.
Figure 4: DM25TE Technical Diagram (Outline, Internal Structure, Specifications).

Refer to Figure 4 for the motor's outline dimensions (L1, L2, Ø32, Ø25) and internal structure. The motor consists of a built-in receiver, the motor unit, a brake, and a reducer. An optional limit switch head (model 25-303#) is available for precise limit settings.

4.2 Mounting the Motor

  1. Insert the tubular motor into the roller tube of your blind or curtain system. Ensure a snug fit.
  2. Attach the appropriate mounting brackets to the motor ends.
  3. Secure the entire assembly to the desired location (e.g., window frame, wall, or ceiling) using suitable fasteners.
  4. Ensure the motor is level and securely fastened to prevent vibration and ensure smooth operation.

4.3 Electrical Connection

  • Connect the motor's power cable to a compatible power source (100-240V AC, 50/60Hz).
  • Ensure all electrical connections are secure and insulated according to local electrical codes.
  • The motor has a built-in transformer, simplifying wiring.

4.4 Setting Limit Positions

The DM25TE motor allows for setting upper and lower limit positions for your blind or curtain. This typically involves a programming sequence using the remote control (e.g., DC1600) and/or physical adjustments on the motor if an optional limit switch head is used. Consult the specific remote control manual for detailed programming instructions.

5. Operation

The DM25TE motor is operated via a compatible radio frequency (RF) remote control, such as the DC1600 model.

5.1 Pairing the Remote Control

Before first use, the remote control must be paired with the motor. The exact pairing procedure varies by remote control model, but generally involves:

  1. Ensuring the motor is powered on.
  2. Pressing a programming button on the motor or cycling power in a specific sequence.
  3. Pressing a button on the remote control within a short timeframe.
  4. The motor will typically jog or beep to confirm successful pairing.

Refer to your remote control's instruction manual for precise pairing steps.

5.2 Basic Control

  • UP Button: Moves the blind/curtain upwards.
  • DOWN Button: Moves the blind/curtain downwards.
  • STOP/MY Button: Stops the blind/curtain at its current position or moves it to a pre-programmed 'my' favorite position.

6. Maintenance

The DM25TE tubular motor is designed for low maintenance. Follow these guidelines to ensure longevity:

  • Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the mounting brackets and roller tube for any signs of wear or loosening. Tighten fasteners if necessary.
  • Cable Integrity: Ensure the power cable is not pinched, cut, or damaged. Replace damaged cables immediately by a qualified technician.
  • Lubrication: The motor is factory-lubricated and does not require additional lubrication.

7. Troubleshooting

Problem Possible Cause Solution
Motor does not respond to remote.
  • No power to motor.
  • Remote control battery low/dead.
  • Remote not paired with motor.
  • Obstruction preventing movement.
  • Check power supply and connections.
  • Replace remote control batteries.
  • Re-pair remote control (refer to Section 5.1).
  • Remove any obstructions.
Motor runs but blind does not move.
  • Motor not properly engaged with roller tube.
  • Roller tube damaged or detached.
  • Ensure motor is securely seated in the roller tube.
  • Inspect roller tube for damage; replace if necessary.
Blind stops at incorrect positions.
  • Limit settings are incorrect.
  • Re-adjust the upper and lower limit positions (refer to Section 4.4).

8. Specifications

The following specifications are typical for the DM25TE series, specifically the DM25TE-0.7/34 variant. Other variants (e.g., DM25TE-0.7/20, DM25TE-1.5/20) may have different torque and speed ratings.

Feature Specification
Model Series DM25TE
Rated Torque 0.7 N.m
Rated Speed 34 rpm
Tube Diameter 25 mm
Rated Voltage 100-240 V
Rated Power 8.8 W
Rated Current 0.085 A
Frequency 50/60 Hz
Protection Degree IP44
Max Number of Turns ∞ (Infinity)
Product Length (L1/L2) 413/403 mm
Certification CE
Package Dimensions (L x W x H) 40 cm x 6 cm x 6 cm
Package Weight 0.7 kg

9. Warranty and Support

The DOOYA DM25TE Tubular Motor is manufactured to high-quality standards and is CE certified. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty services.

10. User Tips

  • Remote Compatibility: The DM25TE motor is compatible with various DOOYA remote controls, including models like DC1600 and DC1602. Always ensure your remote is properly paired.
  • Model Variants: Be aware that the DM25TE series includes different variants (e.g., DM25TE-0.7/20, DM25TE-0.7/34, DM25TE-1.5/20) which may have differing torque and speed specifications. Verify the exact model number on your motor's label for precise specifications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.