RIDEN RD6018 / RD6018W

Contents

RD6018 / RD6018W DC-DC Power Supply Module User Manual

RIDEN DC-DC Voltage Step Down Power Supply Module, Buck Converter, Voltmeter, Multimeter

1. Introduction

Thank you for choosing our product. Please read this manual carefully before first use for safe operation, and keep it for future reference. Our product is designed for reliability and convenience.

1.1 Safety Precautions

  • Do not use the product beyond its intended purpose to avoid damage or injury.
  • Keep away from children under 3 years old without supervision; small parts may cause choking (if applicable).
  • Stop using immediately if the product is damaged, malfunctioning or makes abnormal noises; contact customer service.
  • Do not disassemble, modify or repair the product yourself (may void warranty and cause risks).
  • For electrical products: Match voltage before use; keep away from water/heat; unplug when not in use; replace damaged cords/plugs with originals only.
  • Avoid extreme temperatures, direct sunlight and heavy loads on the product.

2. Key Features

  • Available in two versions: RD6018 (USB Communication) and RD6018-W (USB/WiFi Communication).
  • Integrated panel design for easy assembly with a housing and AC-DC power source.
  • High output capabilities: 60V output voltage, 18A output current, 1080W output power.
  • Supports setting maximum output power, adapting to the input power supply unit (PSU).
  • Automatic power adjustment to prevent exceeding set maximum power.
  • Large 2.4-inch colorful LCD screen with high brightness for clear display of multiple parameters.
  • Keypad and encoder potentiometer for combination adjustment, allowing instantaneous storage and recall of setting parameters.
  • Dedicated terminal for battery charging, compatible with various battery types.
  • PC software control for monitoring and setting the power supply (supports Windows 7 to Windows 10).
  • Supports firmware updates for enhanced functionality.
  • Curve interface to display real-time output voltage, current, and power curves.
  • 4-bit resolution with high-precise chip for accurate and stable performance.
  • Full protection design: Easy OVP (Over Voltage Protection) / OCP (Over Current Protection) setting with automatic output stop if protection values are exceeded.
  • RD6018-W only: APP wireless control (Android 5.0-10.0, iOS 10.0-13.4) via WiFi (2.4G) for remote monitoring and control.

3. Technical Specifications

ParameterValue
ModelRD6018, RD6018-W (optional)
Input Voltage6-70.00V
Output Voltage0-60.00V
Output Current0-18.00A
Output Power0-1080W
Input Voltage Measurement Resolution0.01V
Output Voltage Setting Measurement Resolution0.01V
Output Current Setting Measurement Resolution0.01A
Battery Voltage Measurement Resolution0.01V
Input Voltage Measurement Accuracy±(1%+5 digits)
Output Voltage Accuracy (Setting vs. Measurement)±(0.3%+3 digits)
Output Current Accuracy (Setting vs. Measurement)±(0.5%+5 digits)
Battery Voltage Measurement Accuracy±(0.5%+3 digits)
Automatic Cut-off Current (Charging)100mA
Output Ripple Typical250mV VPP@6A
Working Temperature-10℃ to 40℃
External Sensor Temperature Detection Range-10℃ to 100℃ / 0℉ to 200℉
External Sensor Temperature Detection Accuracy±3℃ / ±6℉
Constant Voltage Mode Response Time2ms (0.1A-5A Load)
Constant Voltage Mode Load Regulation±(0.1%+2 digits)
Constant Current Mode Load Regulation±(0.1%+3 digits)
Capacity Measurement0-9999.99Ah
Energy Measurement0-9999.99Wh
Capacity and Energy Statistical Error±2%
Buck Working ModeVoltage drop >1V and >10%
Cooling Fan Start ConditionOutput current >8A or System temperature >45℃
Cooling Fan Shut Down ConditionOutput current <7.9A and System temperature <45℃
Over Temperature ProtectionSystem temperature >80℃
Screen Brightness Setting0-5 (6 levels in total)
Screen Type2.4 inch color display
Item Size167 * 81 * 69mm / 6.57 * 3.19 * 2.72in
Package Size250 * 150 * 100mm / 9.84 * 5.91 * 3.94in
Package Weight680g / 1.50lb

4. Package Contents and Components

Upon unpacking, inspect all components. Should any parts be missing or damaged, please contact customer service.

Product packaging showing the main RD6018 unit and various accessories.
Product packaging with main part and other accessories.
S800 Case and accessory kit including wires, switch, and power inlet.
S800 Case and accessory kit (internal wires are included).
Internal view of the RD6018 module showing the temperature sensor, WiFi communication board, and clock battery slot.
Internal components including Temperature Sensor, WiFi Communication Board, and Clock Battery Slot (requires CR1220 battery).

The package typically includes:

  • RD6018 or RD6018W Main Unit
  • S800 Case (if selected)
  • S800-65 Switch Power Supply (if selected)
  • Accessory kit (internal wires, switch, power inlet, etc.)
  • Chinese and English Instruction Card

5. Setup and Assembly

The RD6018/RD6018W is designed for DIY integration. To make a complete adjustable power supply, you will need a housing and an AC-DC power source.

Diagram showing the assembly of RD6018, 800W AC to DC Power Source (S800-65), and S800 Case.
Integrated Design: RD6018, 800W AC to DC Power Source (S800-65), and S800 Case.

Assembly Notes:

  • The input PSU (Power Supply Unit) we recommend is 800W. If you need full output, please search for a 65V 1200W power source. Note that a 1200W PSU might be too large for the S800 case, requiring a custom case.
  • The RD6018/RD6018W does not contain the case, power source, or cables. You need to purchase these accessories separately to assemble a complete power supply.
  • For the RD6018-W model, do not install or remove the Wi-Fi module when the power is on, as this may damage the device.
  • Ensure all connections are secure and correct before applying power.

6. Operating Instructions

6.1 Basic Operation

  • To Switch On: Press the 'ON/OFF' button.
  • Adjust Settings: Use the keypad and encoder potentiometer to adjust settings as required.
  • To Switch Off: Press the 'ON/OFF' button again. Unplug the power cord after use (where applicable).

6.2 Display Interface

Comparison of the 2.4-inch screen of RD6018 with an older 1.44-inch model, showing clearer and more comprehensive display.
Big-Size HD Screen: 2.4-inch colorful LCD screen for clear and comprehensive data display.
Display Style Selection showing Traditional Style (Default) and Curve Style for real-time output voltage, current, and power curve.
Curve Interface: Support curve display to show real-time output voltage, current, and power curve. The display style can be switched in the instruction section 1.4.2.6.

6.3 Special Functions

  • Data Storage/Call Out: Instantaneously store and recall setting parameters for convenient and effective use.
Demonstration of Data Storage and Data Call Out functions on the RD6018 keypad.
Data Storage/Call Out: Convenient and Effective.
  • Max Power Limit: Support setting maximum output power to adapt to the input PSU. The device will automatically adjust to ensure the power does not exceed the set limit.
Max Power Limit feature showing how to set the maximum output power and its calculation method.
Max Power Limit - Free Adaptation: Support setting max output power, convenient to adapt to the input PSU.
  • Keypad Lock/Unlock: Prevents accidental changes to settings.
  • System Setting: Access various system configurations.
  • Main Page Style Setting: Customize the main display interface.
  • Storage Data Setting: Manage stored data groups.
  • System Information: View product model, serial number, firmware version, etc.

6.4 Software Control (RD6018-W only for APP)

  • APP Wireless Control (RD6018-W): Connect the RD6018-W to the APP via Wi-Fi (2.4G only, 5G unsupported) on your Android (5.0-10.0) or iOS (10.0-13.4) phone. The APP allows remote monitoring and setting of the digital power supply. Search for "RDPower" to download the APP.
Diagram showing the RD6018-W connected wirelessly to a router and controlled by Android and iPhone apps.
APP Wireless Control (Android+iOS) for RD6018-W. Note: WiFi only supports LAN communication when locked.
  • PC Software Control: Monitor and set the digital power supply on your computer using the PC software (supports Windows 7 to Windows 10).
Screenshot of the PC software interface controlling the RD6018, showing various settings and graphs.
PC Software Control: Monitor and set the digital power supply on your computer (supports Win7-Win10 System).

Instruction Videos:

Product overview video demonstrating key features and functions.

7. Maintenance

7.1 Cleaning

Clean the product surface with a soft, dry cloth. Do not use corrosive cleaning agents.

7.2 Firmware Update

The device supports firmware updates to improve functionality and performance. It is recommended to keep your device's firmware up to date.

Diagram showing the firmware update process for the RD6018 via PC software. Note: It will take about 80s to update the firmware.
Firmware Update: Connect to PC and follow the software instructions. Note: It takes approximately 80 seconds to update the firmware.

Refer to the official instruction video for detailed steps: Firmware Upgrade.

8. Troubleshooting

  • Device not turning on: Ensure the power cord is securely connected and the power source is active. Check for any visible damage to the device or cables.
  • Malfunctioning or abnormal noises: Stop using the product immediately and contact customer service.
  • PC Software Incompatibilities: If you experience issues with the PC software, ensure your system is Windows 7 or newer. Install and test the software before extensive use.
  • WiFi Connection Issues (RD6018-W): Ensure your router supports 2.4G WiFi, as 5G is not supported. Refer to the dedicated troubleshooting video: RD6018 WiFi connection Problem and solution.
  • Output Voltage/Current Exceeds Limits: The device has full protection design (OVP/OCP). If the output voltage/current exceeds the set protection values, the output will automatically stop. Adjust your settings accordingly.

9. User Tips

  • Clock Battery: The device includes a clock battery slot. Please prepare a CR1220 battery to save date and time settings.
  • Internal Wiring: Internal wires for assembly are included in the accessory kit.
  • High Current Output: For high current applications, it is recommended to use banana connectors that support large output current.
Diagram illustrating the 18A high current capability and recommending banana connectors for big output current flow.
18A High Current: Recommended to use banana connectors for big output current flow.

10. Warranty and Support

This product is covered by a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, service, or any questions regarding the product, please contact the seller or manufacturer directly.

The series of digital power supplies independently designed by RUIDENG technology have obtained the "Industrial Design Certificate" of the State Intellectual Property Office.

Various patent and certification documents, including an Industrial Design Certificate.
Patent Certification: Strength Guarantee.

A PDF user manual is available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.