Dooya DV24-AF

Contents

Dooya DV24-AF Tubular Motor Instruction Manual

Model: DV24-AF | Brand: Dooya

1. Introduction

The Dooya DV24-AF is a 12V DC tubular motor designed for automating various types of window coverings, including roller blinds, zebra blinds, honeycomb blinds, and Roman shades. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your motor.

2. Product Specifications

FeatureSpecification
Model NumberILCSDYTUBMOTR102 DV24-AF
Rolling Speed17 r/min
Voltage220-240V
Wattage10W
Torque0.8 N.m
Tube DiameterØ25 mm
Max Number of Turns44
Length (L1/L2)413/403 mm
ApplicationRoller blinds or zebra blinds
CertificationCE
OriginMainland China
Package Length44 cm
Package Width11 cm
Package Height11 cm
Package Weight0.6 kg

For detailed dimensions and technical data, refer to the diagram below:

Technical data and dimension drawing for Dooya tubular motors
Figure 1: Technical Data and Dimension Drawing

3. Setup and Installation

This section outlines the general steps for installing the DV24-AF tubular motor into a motorized roller blind system. Professional installation is recommended.

3.1 Components Overview

Diagram showing components for motorized roller blinds
Figure 2: Motorized Roller Blind System Components

The system typically includes:

  • Tubular Motor (DV24-AF)
  • Drive Adapter
  • One Pair of Brackets
  • Driving Tube
  • Fabric (Roller Blind)
  • Remote Controller (sold separately)
  • Tail Plug
  • Bottom Beam

3.2 Wiring Diagram

Ensure all power is disconnected before attempting any wiring. Refer to the diagram below for correct electrical connections.

Wiring diagram for Dooya DV24-AF motor
Figure 3: DV24-AF Motor Wiring Diagram

Key connections:

  • Fire line: Live wire connection.
  • Zero line: Neutral wire connection.
  • Black white line: Motor control wire.
  • White line: Motor control wire.
  • Signal line: For communication with control systems.
  • Power line: Main power input to the motor.
  • Set key P1: Used for setting motor limits and programming.

3.3 Installation Steps

  1. Prepare the Blind: Ensure the roller blind fabric is correctly attached to the driving tube.
  2. Mount Brackets: Securely mount the provided brackets to the wall or ceiling according to your blind's dimensions and installation requirements.
  3. Insert Motor: Insert the DV24-AF tubular motor into one end of the driving tube. Ensure the drive adapter is correctly fitted to the motor and the tube.
  4. Install Blind Assembly: Carefully place the driving tube with the motor into the mounted brackets. Ensure it is securely seated.
  5. Connect Wiring: Connect the motor's wiring to your power supply and control system as shown in the wiring diagram (Figure 3). Double-check all connections for security and correctness.
  6. Power On: Once all connections are secure, restore power to the system.
  7. Set Limits: Use the 'Set key P1' button on the motor and your remote control (if applicable) to program the upper and lower travel limits of the blind. Refer to your remote control's manual for specific programming instructions.

4. Operating Instructions

The DV24-AF motor is typically operated via a remote controller or integrated smart home system. Ensure your remote controller is paired with the motor according to its specific instructions.

4.1 Basic Operation

  • Up Button: Press to raise the blind.
  • Down Button: Press to lower the blind.
  • Stop/Pause Button: Press to stop the blind at any desired position.

4.2 Limit Setting

The motor's travel limits (fully open and fully closed positions) are set during installation using the P1 button and the remote. If adjustments are needed, consult your remote control's programming guide or contact technical support.

Video 1: Demonstration of motorized blind operation.

5. Maintenance

To ensure the longevity and optimal performance of your Dooya DV24-AF tubular motor, follow these general maintenance guidelines:

  • Regular Cleaning: Keep the motor and surrounding areas free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid Moisture: Do not expose the motor to water or excessive humidity. This can damage internal components.
  • Check Connections: Periodically inspect electrical connections to ensure they are secure and free from corrosion.
  • Lubrication: The motor is factory-lubricated and generally does not require additional lubrication. If you notice unusual noises, consult a professional.
  • Professional Inspection: Consider a professional inspection every few years to ensure all components are functioning correctly.

6. Troubleshooting

If you encounter issues with your DV24-AF motor, try the following troubleshooting steps:

6.1 Motor Not Responding

  • Check Power: Ensure the motor is receiving power. Verify that the power outlet is functional and the circuit breaker has not tripped.
  • Check Connections: Inspect all wiring connections (Fire line, Zero line, Power line) as per the wiring diagram (Figure 3) to ensure they are secure.
  • Remote Control: Replace the batteries in your remote control. Ensure the remote is within range and properly paired with the motor.

6.2 Blind Not Moving to Correct Limits

  • Re-program Limits: The travel limits may need to be re-programmed. Refer to your remote control's manual for instructions on how to reset and set the upper and lower limits using the P1 button.
  • Obstructions: Check for any physical obstructions preventing the blind from reaching its full travel.

6.3 Unusual Noises

  • Obstructions: Check for any foreign objects or debris in the blind mechanism or around the motor.
  • Installation: Ensure the motor and blind assembly are correctly installed and securely mounted, without excessive friction or misalignment.

If these steps do not resolve the issue, please contact customer support for further assistance.

7. User Tips

  • For optimal performance, ensure the motor is installed in a dry environment, away from direct exposure to elements.
  • When integrating with smart home systems, always follow the specific pairing and configuration instructions provided by your smart home hub manufacturer.
  • Regularly test the motor's limits to ensure they remain accurate, especially after power outages or system resets.

8. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your seller directly. If you require technical assistance or have questions not covered in this manual, please reach out to the manufacturer's or seller's customer support team.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.