1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your new RC49141 infrared remote control. This high-grade replacement remote is designed to be compatible with a range of Hitachi TV models, offering a comfortable and easy-to-operate experience with its delicate keys and compact design. No programming or complex setup is required; simply insert batteries and begin use.
This image displays the full layout of the remote control, highlighting the power button, number pad, volume and channel controls, navigation cluster, and dedicated function buttons including Netflix.
2. Setup
2.1 Battery Installation
The RC49141 remote control requires batteries for operation (batteries are not included in the package). Please follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover downwards to open the compartment.
- Insert two AAA batteries (not supplied), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
This image shows the rear of the remote with the battery cover removed, illustrating where to insert the batteries.
2.2 Initial Use
This remote control is a dedicated replacement and typically requires no programming or complex setup. Once batteries are correctly installed, it should function immediately with compatible Hitachi TV models.
3. Operating Instructions
The RC49141 remote control provides intuitive access to your Hitachi TV's functions. Below are common button functions:
This image provides an angled perspective of the remote, useful for understanding the three-dimensional layout and feel of the buttons.
- Power Button (⏻): Turns the TV on or off.
- Netflix Button: Direct access to the Netflix application.
- Number Pad (0-9): Directly select TV channels.
- Volume Up/Down (+/-): Adjusts the TV's volume level.
- Channel Up/Down (P∧/P∨): Changes TV channels sequentially.
- Navigation Buttons (Up, Down, Left, Right): Navigate through menus and options.
- OK Button: Confirms selections in menus.
- MENU Button: Opens the TV's main menu.
- BACK Button: Returns to the previous screen or menu.
- EXIT Button: Exits the current menu or application.
- Colored Buttons (Red, Green, Yellow, Blue): Functionality varies depending on the TV model and current application (e.g., teletext, interactive features).
- Playback Controls (Play, Pause, Stop, Fast Forward, Rewind): Control media playback.
4. Maintenance
4.1 Cleaning
To clean your remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote's electronics or finish.
4.2 Battery Replacement
When the remote control's performance degrades (e.g., reduced range, unresponsive buttons), it's likely time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both batteries at the same time with new ones of the same type (AAA).
5. Troubleshooting
If you encounter issues with your remote control, please refer to the following common problems and solutions:
- Remote not responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new ones.
- Check for any obstructions between the remote control and the TV's IR receiver.
- Ensure you are within the effective operating range and pointing the remote directly at the TV.
- Buttons feel less sensitive than original remote:
- While this remote is fully functional, some users may perceive a slight difference in button sensitivity compared to the original manufacturer's remote. This is generally normal for replacement units and does not indicate a defect.
- Specific functions not working:
- Verify that your TV model is listed as compatible. While broadly compatible, some very specific or advanced functions might vary.
- Ensure the TV's firmware is up to date, as this can sometimes affect remote compatibility.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Remote Controller |
| Item Type | TV Remote Controller |
| Model | RC49141 |
| Material Process | ABS |
| Color | Black |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Use | TV |
| Origin | Mainland China |
| Package Length | 28 cm |
| Package Width | 12 cm |
| Package Height | 3 cm |
| Package Weight | 0.13 kg |
| Compatible TV Models | 32HB1W66l, 40HB1W66l, 32HB4T41, 32HB4T61-Z, 2HB4T61H, 32HB4T62, 32HB6T |
7. User Tips
- Always ensure fresh batteries are used for optimal performance, as they are not included with the remote.
- While the remote is designed for immediate use without programming, if you experience any issues, double-check battery orientation and ensure a clear line of sight to your TV's IR receiver.
- Be aware that the tactile feel or sensitivity of the buttons might differ slightly from your original TV remote, which is common for aftermarket replacements.
8. Warranty and Support
For any issues not covered in this manual, or for further assistance, please contact the retailer or manufacturer from whom you purchased the remote control. Keep your purchase receipt as proof of purchase for any warranty claims.
