1. Introduction
The XTOOL D7S Diagnostic Tool is an upgraded version of the XTOOL D7, designed for professionals, workshops, garages, and DIY enthusiasts. It interfaces with the Electronic Control Unit (ECU) of a vehicle to retrieve diagnostic trouble codes (DTCs), access data stream information, and command active tests (bi-directional control tests). This tool is capable of graphing up to eight (8) live data parameters on a single screen and includes ECU information. It also supports Fiat Chrysler Automobiles (FCA) protocols.
The D7S runs on Android 10 OS, features a Quad-Core 1.5GHz processor, 2GB RAM, 64GB ROM, and a 7-inch 1024x600 touch screen. It includes a built-in 2500mAh 7.3V battery, 2.4GHz & 5GHz Wi-Fi, a collapsible kickstand, built-in speaker, microphone, and a rear camera. It comes with 3 years of free software updates and a 2-year warranty.
2. Safety Information
For your safety, the safety of others, and to prevent damage to devices and vehicles, it is crucial to read and understand all safety instructions presented in this manual before operating or coming into contact with the device.
2.1 General Safety Instructions
- Read and Understand: Ensure that all operators and individuals in the vicinity of the device have read and understood the safety instructions.
- Proper Use: Only use the device as described in this manual. Always adhere to the safety messages and test procedures provided by the vehicle or equipment manufacturer.
- Knowledge and Skill: The automotive technician must be knowledgeable about the system being tested. Familiarize yourself with proper service methods and test procedures.
- Acceptable Testing Practices: Perform tests in a manner that ensures your safety, the safety of others, and prevents damage to the device and the vehicle.
2.2 Specific Responsibilities
- Refer to Manufacturer Guidelines: Always consult and follow the safety messages and applicable test procedures from the vehicle or equipment manufacturer before using the device.
- Use Appropriate Tools and Techniques: Due to the variety of test applications and product variations, it's important to use the correct tools and techniques for each specific task.
- Anticipate Safety Requirements: While this manual provides comprehensive guidance, it cannot cover every potential situation. Technicians must be prepared to handle unforeseen circumstances safely.
2.3 Safety Messages
Safety messages are included to prevent both personal injury and damage to equipment. Each safety message begins with a signal word that indicates the level of hazard involved.
⚠️ Danger
This signal word indicates "an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders."
❗ Warning
This signal word "indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders."
2.3.1 Safety Warnings
- Safe Environment: Always perform automotive testing in a safe environment.
- Eye Protection: Wear safety eye protection that meets ANSI standards.
- Avoid Hazards: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Ventilation: Operate the vehicle in a well-ventilated work area to avoid inhaling poisonous exhaust gases.
- Transmission and Brakes: Put the transmission in PARK (for automatic) or NEUTRAL (for manual) and ensure the parking brake is engaged.
- Wheel Blocks: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Ignition System Caution: Be extra cautious around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components generate hazardous voltages when the engine is running.
- Fire Extinguisher: Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Test Equipment Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- No Driving While Testing: Do not drive the vehicle and operate the test equipment simultaneously to avoid distractions that may cause an accident.
- Service Manual Reference: Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- Battery Check: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the test equipment or generating false data.
- Avoid Electromagnetic Interference: Do not place the test device on the vehicle's distributor, as strong electromagnetic interference can damage the device.
3. Setup
3.1 What's In The Box
The XTOOL D7S package includes the following items:

Figure 3.1: Complete Packing List
| Item | Quantity |
|---|---|
| D7S Main Unit (Tablet) | 1 |
| Quick Start Guide | 1 |
| DB15 to OBD2-16 Main Cable | 1 |
| Power Charger | 1 |
| USB3.0 Data Cable (Type-C to Type-A) | 1 |
| Charger EU | 1 |
| Charger US | 1 |
| Charger UK | 1 |
| Packing List | 1 |
| Tool Kit (Case) | 1 |
| Color Carton | 1 |
3.2 Powering On/Off
3.2.1 Turning On
To turn on the XTOOL D7S Diagnostic Tool, press and hold the power button located on the top right of the device for approximately five seconds. The tool will automatically power on if the internal battery pack has sufficient charge or if it is connected to an AC power supply. If the internal battery pack is completely drained, you need to charge it for more than 6 hours and then turn it on again.
3.2.2 Turning Off
To turn off the XTOOL D7S Diagnostic Tool, press and hold the power button for more than three seconds. The tool will power off.
IMPORTANT:
Before turning off the XTOOL D7S Diagnostic Tool, make sure to terminate all vehicle communications. If you try to power off the tool while it is still communicating with the vehicle, a warning message will appear. Forcing a shutdown during communication could potentially cause issues with the ECM (Engine Control Module) on certain vehicles. It's crucial never to disconnect the DB15 main cable while the Diagnostic Tool is actively communicating with the vehicle ECM.
3.2.3 Emergency Shutdown
During normal operation, turn the Diagnostic Tool off using the Turning Off procedure above. The emergency shutdown procedure should only be used if the Diagnostic Tool does not respond to navigation or control buttons or exhibits erratic operation. To force an emergency shutdown, press and hold the Power button for five seconds until the Diagnostic Tool turns off.
IMPORTANT:
Using the emergency shutdown procedure while communicating with the vehicle ECM may lead to ECM problems on some vehicles.
3.3 Product Activation
- Connect to Wi-Fi: Connect to an available Wi-Fi network.
- Select Language: Select a language for the operating system.
- Register/Log In: For first-time users, after pressing and holding the power button to turn on the system, the system will automatically enter a guided process. You will be prompted to enter a valid email address and set a login password. Click "Register" to open the registration page. If you have already registered, click the "Log In" button and enter your email and password to log in.
- Login Successful: A pop-up window showing "Login Successful" indicates that you have completed the first boot setup.
- Start Now: Click "Start now" to enter the diagnostic system and begin using the device.
NOTE:
If you are unable to register the Diagnostic Tool or you can't see the activation screen, contact our support team via support@xtoolonline.com.
3.4 Wi-Fi Connection
The D7S Diagnostic Tool can connect to 2.4 GHz or 5.0 GHz frequency hotspots or Wi-Fi. Swipe up from the hidden bottom toolbar and see the tab menu. Click Home > Network & Internet > Switch on Wi-Fi connection > Click Wi-Fi icon to view available Wi-Fi networks > Select the Wi-Fi you want to connect and input the password.
If your Wi-Fi connection is not functioning well, or if you are in an area without access to home Wi-Fi, you can connect to your mobile phone hotspot instead.
3.4.1 How to Turn on the Mobile Hotspot:
- For iOS users: Go to Settings > Turn on cellular network > Personal Hotspot > Switch on "Allow Others to Join" and "Maximize Compatibility" to set your phone and connect to the hotspot from your Diagnostic Tool.
- For Android users: Go to Settings > Wireless & networks > Tethering & portable hotspot > Portable WLAN hotspot > Switch on hotspot > Configure WLAN hotspot > Encryption Type > WPA2 PSK. Show advanced options and make sure "Max connections allowed" has user left for the Diagnostic Tool.
NOTE:
Wi-Fi connection is not necessary for diagnostics with most vehicle brands. However, for certain brands like Peugeot, which require access to an online server during diagnostics, it is essential to connect to Wi-Fi.
3.5 Vehicle Connection
To ensure proper communication and diagnostics, the vehicle must be correctly identified. The vehicle identification sequence is menu-driven, and you should follow the screen prompts to enter the required information. Exact procedures may vary by the make, model, and year of the vehicle.

Figure 3.2: Vehicle Connection Steps
- Press and hold the Power button to turn on the tablet.
- Select App language and start the activation.
- Input your E-mail address, and click OK to complete the activation.
- Connect the main cable to the tablet and tighten the screws.
- Plug the DB15 main cable into the vehicle's DLC port via OBD2-16 adapter.
- Your tablet is now ready for diagnosis.
4. Operating the Diagnostic Tool
4.1 Diagnostic Screen Layout
When you turn on the Diagnostic Tool, it automatically starts the diagnostic program, and you will see the diagnostic screen appear. The Diagnostic Tool utilizes a hidden toolbar located at the bottom of the diagnostic tablet. Swiping up from the bottom of the screen will reveal this toolbar for a period of 3 seconds. The diagnostic screen includes various icons for different functions.

Figure 4.1: XTOOL D7S Diagnostic Screen Layout
4.1.1 Diagnostic Screen Icons
- Auto Scan: Automatically detects and decodes the VIN (Vehicle Identification Number), then scans all available vehicle electronic control modules for diagnostics.
- Diagnostic: Brings up the diagnostic menu, allowing navigation via Auto VIN, manual input, DEMO program, and OBD-II tests.
- Special Function: Covers commonly performed maintenance services for DIYers and professionals.
- Report: Includes functions for diagnostic reports, data playback, and data viewing.
- Updates: Allows downloading diagnostic software programs individually or in batch.
- More: Enables setting up user accounts, workshop profiles, checking subscription periods, accessing firmware information, using the endoscope feature, and viewing the user manual in PDF format.
- Settings: Customizes language, units, USB mode, OS settings, volume, brightness, and reviews device information.
- Remote Control: Launches TeamViewer for remote assistance.
- XTOOL: Provides contact information and social media links for support.
4.2 Hidden Toolbar Menu
Swiping up from the bottom of the touchscreen will reveal a toolbar for 3 seconds. Clicking the home button on this toolbar will bring up the main screen of the Android tablet. On the tablet page, you can freely switch between horizontal and vertical screens.
4.2.1 Toolbar Icons
- Screenshot: Takes a screenshot of the current screen.
- Volume Down: Decreases the volume of the speaker.
- Back: Goes back one step from the current menu.
- Home: Goes to the main screen of the Android tablet.
- Volume Up: Increases the volume of the speaker.
- Diagnostic Program Shortcut: Runs the diagnostic program.
- Screen Recording: Starts/stops recording the screen including surrounding sound.
- Background Cleanup: Cleans up background running apps to improve tablet speed.
4.3 Main Screen Layout and Icons
The main screen provides access to various applications and functions:
- Calendar: Displays the calendar in day, week, and month views.
- Contacts: Manages contact information, allowing new contacts or bulk import from VCF files.
- Clock: Sets alarms, timers, uses the stopwatch, and accesses the clock.
- Email: Creates new email accounts for sending emails or sharing reports.
- Music: Adds new songs, playlists, albums, and artists.
- Sound Recorder: Records voice messages.
- Calculator: Opens the calculator.
- ES File Explorer: Manages documents, reports, files, and folders stored in memory.
- Adobe Acrobat: Manages PDF files and accesses Dropbox accounts.
- Quick Support: Enables remote control by the tech support team.
- Settings: Configures Android tablet settings.
- Gallery: Views screenshots and screen recordings.
- Chrome: Accesses product support from the XTOOL website and searches information.
- Camera: Activates the rear camera to take pictures of vehicle problems.
- Video: Views recorded screen recordings.
- Explorer: Views internal memory and edits files.
- Endoscope: Used with an endoscope for visual inspection.
4.4 Data Transfer (USB Type-C to PC)
To enable data transfer between the Diagnostic Tool and a PC:
- Connect Cable: Insert one end of the Type-C cable into the Diagnostic Tool and the other end into a USB 2.0 port on the PC.
- Enable Data Transfer: Swipe down from either the upper right or upper left corner of the Diagnostic Tool to bring up the drop-down menu. Click on "Android System. USB file transfer turned on".
- Select File Transfer: Change the option from "No data transfer" to "File Transfer".
- Access Files: On the PC, check the connected devices and click on "IP900" to access and manage the files stored in the internal memory of the Diagnostic Tool.
4.5 Red-Green Color Blindness Color Correction Mode
To set the Diagnostic Tool to red-green color blindness color correction mode:
- Hidden Menu: Swipe up from the bottom of the screen to bring up the hidden menu.
- Main Screen: Click the home button to switch to the main screen of the Android tablet.
- Settings: Navigate to Settings > Accessibility.
- Color Correction: Scroll down to find "Color correction" and toggle "Use color correction" to the on position.
4.6 How to Diagnose Vehicles
This section covers the fundamental operation of the Diagnostic Tool function.
- The Diagnosis icon is situated on the Home screen.
- The Diagnostic Tool function enables communication with a vehicle's electronic control systems. This capability allows you to retrieve diagnostic trouble codes (DTCs), view PID data, conduct actuation tests, and perform advanced functions such as resets, relearns, matchings, adaptations, initializations, and more.
4.6.1 My Vehicles
The "My vehicles" function allows you to add frequently used diagnostic programs for quick access. Click the "Diagnostic" icon on the diagnostic screen, then select "My vehicles" in the top taskbar.
- Add Program: Click the add icon > select the region where the vehicle brand is originated > select the brands you often use > click "completed".
- Remove Program: Click the pen icon > select the diagnostic program you want to remove > click "Remove".
4.6.2 Compatibility Check
The D7S is compatible with all OBD-II/EOBD vehicles for generic tests and a wide range of vehicle makes and models across various regions for comprehensive diagnostics. Specific functions may vary by vehicle.
IMPORTANT:
Special Functions on the main diagnostic screen are not universally available for all vehicles. Compatibility requires verification using the vehicle's VIN, make, model, and year. Consult tech support or the XTOOL website for compatibility information.
4.6.3 Software Program Version
The Diagnostic Tool displays the current software program version at the bottom of each vehicle manufacturer's screen.
4.6.4 Demo Program
The "DEMO" program simulates vehicle navigation and demonstrates function options. Use it to practice before activating the tool.
IMPORTANT:
The DEMO program may not display the most current diagnostic procedures or actual screen interface. It is not for checking vehicle coverage or compatibility.
4.6.5 Trial Mode
Trial mode offers practice and familiarization with the tool's interface but may not accurately represent the latest diagnostic processes or screen interface. It is not for vehicle coverage or compatibility checks.
4.6.6 Diagnose Vehicles - Identification
To ensure proper communication, the vehicle must be correctly identified. Follow screen prompts to enter information.
- Steps to Identify a Vehicle:
- Follow Screen Prompts: Use menu-driven prompts.
- Options for Vehicle Identification: VIN, Manufacture area > Model > Year, or other specific criteria.
- Automatic Scan: Click "Auto Scan" on the diagnostic screen to scan VIN and decode it automatically.
IMPORTANT:
If Auto Scan fails, try other vehicle identification options. "Manual Selection" is the most reliable solution. Auto Scan may not be compatible with all vehicles.
- Diagnostic: Click "Diagnostic" icon to bring up the vehicle selection menu. Click the icon at the top left corner to see "Auto Scan" and "Manual Input" options. Input VIN manually.
NOTE:
If VIN cannot be decoded, and both Auto Scan and Manual Input fail, try Automatic Detection or Manual Selection.
- Automatic Detection: Click "Diagnostic" > Select region > Select vehicle brand > Select "Automatic Detection".
NOTE:
Automatic Detection may not function with all models. If unsuccessful, choose Manual Selection.
- Manual Selection: If other methods fail, use "Manual Selection". Click "Diagnostic" > Select region > Select vehicle brand > Select "Manual Selection" > Select model year.
4.6.7 Automatic Scan
Scans all available vehicle modules for diagnostics. After scanning, the tool displays vehicle systems affected by faults and the number of failures.
4.6.8 Submit Feedback
Click the message icon to submit feedback to support if you encounter issues.
4.6.9 CAN Fast Scan
Scans all available vehicle systems using the CAN protocol (post-2005 vehicles) much faster.
4.6.10 System Selection
Allows selecting an individual vehicle module for targeted troubleshooting.
4.6.11 Diagnostics
Once the vehicle is identified, the tool can scan and access electronic control systems to pull DTCs, retrieve PID data, freeze frame, ECU information, and perform diagnostic tests (actuation tests/bi-directional controls) and advanced resets, relearns, matchings, adaptations, and initializations. It can also perform pre-scan and post-scan.
- Read Codes: Displays DTC records. Selecting them may open a sub-menu. "System is OK" or "No Trouble Code" indicates no related fault codes or faults not monitored by that ECU.
- Clear Codes: Erases DTC records, including current and historical data, and other stored information from the ECM.
NOTE:
Clearing codes typically erases freeze frame data.
- DTC Erased While Fault Remains: If codes are erased but the issue is unresolved, the code will reappear.
- DTC Erased and Fault Fixed - History Code: If the fault is fixed, the ECU may clear the code or classify it as historical.
- DTC Erased and Fault Fixed - History Cleared: If the fault is fixed and codes are cleared, history is cleared. Do not clear if another technician needs to investigate.
4.6.12 PID Data
Displays PID data for various sensors from the ECM. Allows viewing real-time PID data in list, graphing, analog dashboard, setting alarms, and custom/merged graphing.
- PID Data List: Displays PID names and real-time values.
- Individual PID Data Graphing: Click "custom" icon and then "chart" to choose format (List, Column, Graph, 2D-graph).
- Set Maximum & Minimum Value Alarms: Click the icon to set alarms. The tool will display colors if PID data exceeds limits.
- Zoom In & Zoom Out & View In Full Screen: Click magnifier icon to zoom x-axis/y-axis up to 3 times.
- Custom Up to 8 PID Data: Tick boxes for up to 8 PID data and click "Custom" to show a custom list.
- Individual Graphing for Up to 8 PID Data: Click "custom" icon to show individual lists for up to 8 PID data on one screen.
- 8-In-1 Graphing: Click "Chart - 2D-graph" to combine individual data bars into a single chart.
- Fold & Unfold PID Data Name: Fold the PID data name list to view merged graphs on a bigger screen.
- Data Recording & Playback: Click "Record" to record PID data for later review via "Report" function.
- Export Data as CSV & Data View: When recording, click "save" to save the data stream. View CSV files via Main Diagnostic Screen > Report > Data View.
- Export CSV File to a PC: Connect to PC via Type-C, enable "Data Transfer", then copy from IP900 > Internal Shared Storage > Diagnosis > CSV records.
- Share CSV File via Bluetooth: Swipe up hidden toolbar, click home icon, then File > Local > Home > Diagnosis > CSV_records > select file > "More" > Share > Bluetooth.
4.6.13 Freeze Frame
When a fault code is triggered, the ECU saves related data to generate a freeze frame, used to analyze the root cause. Freeze frame data varies by vehicle; some vehicles may not support this function.
4.6.14 Actuation Tests (Bi-Directional Controls)
Checks the operation of certain actuators (solenoids, valves, relays) by commanding the ECU to perform specific functions and tests. This helps quickly pinpoint vehicle failure causes.
4.6.15 Special Function
Performs advanced functions like resets, relearns, matchings, adaptations, and initializations. Menu options vary by vehicle. The diagnostic menu offers a broader range of options than the main diagnostic screen.
4.6.16 To Exit the Diagnostics
Diagnostics remain active as long as there is an active communication link. Exit all tests before disconnecting the main cable or turning off the tool. Pressing the back button or closing the diagnostic program will interrupt communication.
NOTE:
Damage to the vehicle ECU may occur if communication is disrupted. Ensure the main cable is properly connected.
4.6.17 Full System Diagnostic Report
After diagnostics, enter VIN, mileage, and model year. Click "OK" to create a report for review or sharing. This is referred to as the "Full System Diagnostic Report".
4.6.18 Fault Code Report
Generated via the vehicle scan/Auto Scan result screen, this simplified report displays only retrieved fault codes and impacted systems.
NOTE:
Both report types are stored in the "Diagnosis Report" section.
4.6.19 Diagnostic Speed
The tool provides fast scanning, but speed varies based on vehicle communication protocol (e.g., CAN vs. IOS9141) and the number of control modules.
4.6.20 Integrated Module
Older vehicles may integrate multiple electronic control systems into a single module (e.g., Powertrain Control Module for Engine/Transmission, Brake Control Module for ABS/EPB). This may require navigating to specific PID data or special functions within these integrated modules.
4.7 OBD-II/EOBD Functions
This section describes the concept, protocols, test functions, and basic operation of the OBD-II/EOBD function. To find OBD-II/EOBD function, go to Diagnostic > Region Selection > OBD-II.
4.7.1 OBD-II Protocols
Global OBD uses 5 communication protocols:
- J1850PWM
- J1850VPW
- ISO 9141-2
- ISO 14230-4
- ISO 15765-4(CAN)
4.7.2 Basic Operations
To access generic OBD-II/EOBD data:
- Click "Diagnostic" on the main diagnostic screen.
- Select the region where the vehicle manufacturer is originated.
- Click "OBD-II" icon beside the DEMO.
4.7.3 Auto Scan & Protocol Selection
Two options to access OBD-II/EOBD data:
- Auto Scan: The tool attempts to establish communication by sequentially trying each protocol.
- Protocol Selection: Directly select the specific protocol your vehicle uses.
- Help: Describes DLC location, DTC library, Abbreviations, and OBD background information.
4.7.4 10 Modes of OBD-II
- Mode $01 – I/M Readiness
- Mode $02 – Read Freeze Frame
- Mode $03 – Read Trouble Code
- Mode $04 – Clear Trouble Code
- Mode $05 – O₂S Monitoring Test
- Mode $06 - On-Board Monitor Test
- Mode $07 – Read Trouble Code
- Mode $08 – Component Test
- Mode $09 – Vehicle Information
- Mode $0A – Read Trouble Code
4.7.5 Connecting the Main Cable
Connection of the main cable to the Diagnostic Tool and vehicle OBD-II port is required for OBD-II/EOBD testing.
4.7.6 OBD-II/EOBD Menu
- Read Trouble Code: Displays current emission-related DTCs (Stored, Pending, Permanent).
- Stored Codes: Prioritized by emission severity, affecting MIL illumination and code erase.
- Pending Codes: Diagnostic trouble codes whose setting conditions were met but need to be met on two or more consecutive drive cycles to set.
- Permanent Codes: Displays a record of codes that were severe enough to illuminate the MIL.
- Generic & Manufacturer-Specific Codes: DTCs with a second character of "0" are Generic; "1" are Manufacturer-Specific.
- Clear Trouble Code (Mode $04): Erases all emission-related diagnostic data. A confirmation screen appears.
- Live Data (Mode $01): Views current emission-related data.
- Read Freeze Frame (Mode $02): Displays a snapshot of critical parameter values when a DTC is set.
- I/M Readiness (Smog Check): Checks the readiness of the monitoring system.
- O₂S Monitoring Test (Mode $05): Checks the integrity of oxygen sensors.
- On-Board Monitor Test (Mode $06): Views results of OBM tests.
- Component Test (Mode $08): Enables bidirectional control of the ECM for testing components.
- Read Vehicle Information (Mode $09): Displays vehicle-specific information (VIN, calibration ID, CVN).
4.8 Special Functions
The D7S offers 39+ advanced maintenance services. Functions vary by vehicle.

Figure 4.2: 39+ Hot Reset Service Functions
- Oil Reset: Resets the engine oil life system after an oil change.
- EPB Reset: Resets the brake pad after replacement.
- EPS Adaptation: Stores the current steering wheel position as the straight-ahead position.
- BMS Reset: Evaluates battery charge state, monitors current, registers battery replacement, and activates rest state.
- Injector Adaptation: Writes the identification code of the fuel injector into the ECU.
- DPF Regen: Manages DPF regeneration and component replacement teach-in.
- GPF Regen: Regeneration process for Gasoline Particulate Filter.
- TPMS Reset: Performs learning, matching, and resetting functions for tire pressure sensors.
- ABS Bleeding: Bleeds the brake system when ABS contains air.
- Power Balance: Shuts down individual injectors to determine power contribution.
- Seat Calibration: Matches or configures seats with memory function.
- EEPROM: Reads and writes data into EEPROM (requires EEPROM adapter, not included).
- Language Change: Changes the system language of the instrument cluster or control console.
- Transport Mode: Deactivates or disables transport mode.
- Control Unit Reset: Resets ECU software due to abnormal temperature or voltage.
- Throttle Adaptation: Resets throttle actuators and learned values to default.
- Rain/Light Sensor: Resets the sensor after replacement.
- AFR Adaptation: Resets or relearns air/fuel ratio parameters.
- HV Battery: Checks the voltage of individual battery packs.
- Gearbox Adaptation: Completes self-learning of the gearbox.
- Speed Limit: Removes speed limit for imported vehicles.
- IMMO Reset: Resets or reprograms the Immobilizer System.
- Clutch Adaptation: Resets the clutch after replacement.
- Stop/Start Reset: Opens or closes automatic Start/Stop function.
- FRM Reset: Resets Footwell Room Module.
- EGR Relearn: Learns the EGR valve after cleaning or replacement.
- A/C Relearn: Performed when AC ECU or actuator is replaced.
- Headlight: Initializes adaptive headlight system.
- ABS/ESP Adaptation: Resets acceleration sensor.
- Windows Initialization: Recovers ECU initial memory and automatic window function.
- Sunroof Initialization: Recovers ECU initial memory and automatic sunroof function.
- Turbo Relearn: Calibrates newly installed turbo components.
- Water Pump Actuation: Activates electric water pump after replacement.
- Suspension Adaptation: Adjusts vehicle body height sensor.
- Airbag Reset: Resets airbag system and clears crash data.
- Tire Size Reset: Resets tire size after replacement or upgrade.
- Instrument Cluster: Adjusts mileage displayed.
- ADAS: Recalibrates ADAS system after module/sensor replacement.
- ECU Configurations: Queries and activates hidden functions.
- CPS Reset: Performs tooth learning for the vehicle.
- Cam Sensor Adaptation: Calibrates engine control unit to match camshaft position.
4.9 Settings
This section covers settings for the diagnostic software or tablet.
- Language: Go to "Settings" > "Language" to change the Android tablet language. Contact support to authorize new language software programs.
- Unit: Provides 3 sets of units: Metric, Imperial, US.
- USB Setting: Transfers files between device and PC, and connects with accessories.
- Sound & Display: Adjusts volume and screen brightness.
- Storage Management: Clears cache and checks remaining storage.
- About: Checks serial number and APP version.
5. Maintenance
5.1 Cleaning Equipment
Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
5.2 Software Updates
Software updates are crucial for new features, vehicle coverage, and optimized performance. The D7S comes with 3 years of free software updates from the activation date.
- Subscription: An annual fee covers compatibility. Existing software remains usable after subscription expiration, but new updates require renewal.
- Update Method: Updates can be performed via Wi-Fi or mobile hotspot.
- Update All: Click "Update All Software Programs" at the bottom right of the update menu.
- Update Individual: Click the "↑" icon next to the corresponding software program.
- Delete Software Program: To free up space, delete rarely used programs. It's advisable to re-download deleted programs before subscription expires.
6. Troubleshooting & FAQ
6.1 Common Issues and Solutions
- Device hangs/unresponsive: If the device hangs or becomes unresponsive, perform an emergency shutdown by holding the power button for five seconds.
- Battery not charging:
- Use the original charging cable or OBD test cable to charge for more than six hours.
- Hold down the shutdown button for 15 seconds and observe if the device turns on normally (without charging cable).
- Connect the device to a computer via USB cable to see if it's recognized.
- If issues persist, contact technical support with a video of the charging issue.
- Update failure/Network abnormal:
- Check router settings (WPA2, not WPA3) and ensure it doesn't block outgoing traffic to non-US regions.
- Try a mobile phone hotspot.
- If the problem persists, contact support.
- Auto scan/VIN not working:
- Try alternative navigation methods: turn on ignition (engine off for newer cars, engine on for older cars) and try auto scan.
- Manual VIN input.
- Diagnosis > Region > Vehicle Selection > Automatic Detection.
- Diagnosis > Region > Vehicle Selection > Manual Selection.
- Email report not received: Whitelist service@xtoolonline.com in your email settings. Check junk/spam folders.
- "License exception" or "Failed" error: Delete and re-download software programs under "Updates". If the issue persists, contact support with the device's S/N.
- Cannot download updates: Switch to mobile hotspot or another Wi-Fi network.
- Registration failure: Try mobile hotspot (recommended) or a different network.
- Lock screen password: Contact support with the device's S/N.
- Q, I, O letters grayed out in VIN input: This is normal due to VIN standards to avoid confusion with numbers.
6.2 User Tips
- Easy Setup and Updates: Users report the D7S is easy to set up and updates quickly.
- Advanced Capabilities: This is a powerful and comprehensive DIY diagnostic tool, offering more than simple code reading.
- Bi-directional Control: Utilize the bi-directional control feature to directly test actuators, which can help in bypassing vehicle controls for diagnostics.
- Compatibility Varies: Functions available vary with the car's age, model, and installed technology. Always check compatibility.
- Monthly Internet Connection: Connect the scanner to the internet at least once a month to report IP location, a government policy compliant requirement.
- Trial Mode Limitations: Trial mode is for practice; register an account for full functionality and vehicle-specific diagnostics.
- Language Change: If you need to change the language, send the device's S/N to the seller for authorization, then update the APP and software.
7. Technical Specifications

Figure 7.1: XTOOL D7S Hardware Configuration
| Item | Description/Specification |
|---|---|
| Display | 7 Inch Touch Screen, 1024 x 600 Resolution |
| Operating System | Android 10.0 |
| Processor | Quad-Core Processor 1.5GHz |
| Memory | 2GB RAM, 64GB ROM |
| Connectivity | Bluetooth 5.0, Wi-Fi (2.4GHz & 5Ghz), Type-C |
| Operating Method | Flat Panel Touchscreen |
| Upgrade Method | Device Connects to WIFI for Online Upgrade |
| Battery | DC 7.3V Rechargeable Li-ion Battery, 2500mAh |
| Tested Battery Life | 3.5 Hours |
| Power Supply Input | 100-240V~50-60Hz 0.5V Max |
| Power Supply Output | 5.0V-3.0A 15.0W/9.0V-2.22A, 19.98W/12.0V-1.67A 20.04W |
| Dimensions | 27.6*3.2*18.7(CM) |
| Free Renewal Update | 3 Years |
| Charging Method | Type-C Charging (fast charging) |
| Supported Protocols | CAN FD/DOIP/FCA |
| USB Port | USB2.0 |
| WIFI | 2.4G/5Ghz |
| Sensor | Gravity Accelerometer/Ambient Light Sensor |
| Audio | Microphone |
| Speaker | Built-In Speaker |
| Camera | 8 Mega Pixel |
| Weight (Including Battery) | 1.1 KG |
| Gross Weight | 3.2 KG |
| Operating Temp Range (Ambient) | 32°F ~ 104°F (0°C ~ 40°C) |
| Storage Temp (Ambient) | 14~122°F (-10~50°C) |
| Operating Humidity | <90% |
8. Warranty & Support
8.1 Warranty Information
Shenzhen XTOOL Technology Co., Ltd. (the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship that results in product failure within two years from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).
The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device.
8.1.1 Warranty Exclusions
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair or, improper storage.
- Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced.
- Damage from exposure to excessive temperature or extreme environmental conditions.
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company.
- Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts.
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.
8.2 Technical Assistance
For technical assistance, you can reach XTOOL via:
- Website: https://www.xtoolonline.com
- Email: support@xtoolonline.com
- Address: Room 601, Block A, Zaoan Business Building, Shigu Road, Xili Residential District, Nanshan District, Shenzhen
8.3 Service Center
The Service Center provides information on how to contact XTOOL for warranty claims, technical support, tutorials, marketing cooperation, business opportunities, or to provide feedback.
8.3.1 Remote Control
This function allows you to request remote assistance from the technical team. Ensure the tool is connected to Wi-Fi, launch TeamViewer, and note your TeamViewer ID. Schedule an appointment in advance.
8.3.2 Data Logging
For software-related issues or communication problems, data logging provides crucial information. Ensure the tool is connected to Wi-Fi for at least 15 minutes and provide the Serial Number (S/N) to support.
8.3.3 App Logging
For app-related issues, request an app logging collection tool from support to gather detailed performance information.
8.3.4 FAQ Database
Access the FAQ database on the XTOOL website: https://www.xtoolonline.com/faqs
8.3.5 Training Center
Diagnostic Tool specific training videos are available on the XTOOL website: https://www.xtoolonline.com/support/product-videos
8.3.6 User Manual (PDF)
A digital PDF version of the user manual is available for viewing and includes a search function. You can access it via the 'More' section on the device.
8.3.7 Contact Information
For general inquiries, support, or wholesale business, use the following emails:
- Support: support@xtoolonline.com
- Wholesale/Business: business@xtoolonline.com / sales@xtoolonline.com
- Marketing: marketing@xtoolonline.com
- Product Development: inventers@xtool.com
You can also find XTOOL on social media platforms like TikTok, Instagram, and Facebook by searching for "xtoolonline" or "XTOOL Official Online Diagnostic Tools".
9. Compliance Information
9.1 FCC Compliance / FCC ID: 2AW3IP806
This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs.
9.1.1 Operation Conditions
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Making changes or modifications without explicit approval from the responsible compliance authority may revoke the user's authorization to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
9.1.2 Radio Frequency Energy
This equipment emits radio frequency energy during operation, which can potentially interfere with radio communications. To mitigate interference:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
9.2 SAR (Specific Absorption Rate)
The device's emitted radio frequency power adheres to FCC regulations on exposure limits. To ensure safe usage, minimize human contact during regular operation. FCC guidelines cap SAR at 1.6 W/kg. To maintain compliance, reduce human proximity to the device's antenna whenever feasible.
9.3 RF Warning Statement
The device meets general RF exposure requirements and can be safely used under typical portable exposure conditions without restrictions. The prefix "IC" indicates compliance with technical specifications established by IC (Innovation, Science and Economic Development Canada).
9.4 RoHS Compliance
This device complies with the European RoHS Directive 2011/65/EU, restricting certain hazardous substances in electrical and electronic equipment.
9.5 CE Compliance
This product conforms to the essential requirements of the following Directives and bears the CE mark accordingly:
- EMC Directive 2014/30/EU
- R&TTE Directive 1999/5/EC
- Low Voltage Directive 2014/35/EU