FREDORCH Controller Collection User Manual

1. Introduction

This manual provides detailed instructions for the FREDORCH remote controls and speed controllers. These accessories are designed to enhance the functionality of various FREDORCH sex machine models, including F6, F6S, F6P, F19, F11, A2, and F2. Please read this manual thoroughly before use to ensure proper and safe operation.

For a downloadable PDF version of this manual, please refer to the official documentation: User manual (PDF).

2. Product Overview

The FREDORCH Controller Collection includes various types of controllers, such as wireless remote controls and wired speed controllers, each designed for specific FREDORCH sex machine models. It is crucial to select the correct controller for your machine model to ensure compatibility and optimal performance.

3. Setup Instructions

The setup process varies slightly depending on the specific controller type (wired or wireless) and your FREDORCH sex machine model. Always ensure the machine is unplugged before connecting or disconnecting any components.

3.1. General Connection Steps (for machines with external controllers)

1. Ensure your FREDORCH sex machine is placed on a smooth, stable surface.
2. Identify the appropriate connection port on your sex machine for the controller. This is typically labeled as 'Motor Input' or 'Controller Port'.
3. Connect the controller's cable to the designated port on the sex machine. Ensure a secure fit.
4. If using a wired speed controller, connect its power adapter to a power outlet.
5. If using a wireless remote control, ensure the receiver board is correctly wired to the machine's motor and power supply (refer to specific wiring diagrams below).
6. Plug the sex machine's power adapter into a power outlet.

3.2. Specific Controller Wiring Diagrams

For advanced users or when replacing internal components, the following diagrams illustrate typical wiring for speed controllers and remote control receiver boards.

3.3. F6S Control Box

3.4. DC Motor Controller (Speed Governor)

4. Operating Instructions

Once the controller is properly connected to your FREDORCH sex machine, you can begin operation.

4.1. General Operation

1. Turn on the knob switch on the controller or machine (if applicable).
2. Adjust the speed of pumping and thrusting using the control knob or remote buttons.
3. Rotate the machine's handle or adjust the angle of the thrusting position as desired.

4.2. Remote Control Operation

1. Power on/off: Press the ON/OFF button (1) to turn the machine on or off. In normal boot mode, the machine operates directly by acceleration and deceleration.
2. Acceleration: Press the '+' button (2) to increase the speed/frequency.
3. Deceleration: Press the '-' button (3) to decrease the speed/frequency.
4. Frequency Conversion: Press the 'MODE' button (4) three times in succession while the machine is powered on to enter frequency conversion mode. This mode offers 18 different frequencies. To exit, press the shutdown button. It is recommended to use the normal mode for the first attempt, then adapt to the frequency conversion mode.

Important Note for Remote Controls: The effective distance of this remote control is within 15 meters. This product is not waterproof; please do not wade or submerge it.

5. Maintenance

Proper maintenance ensures the longevity and hygienic use of your FREDORCH controller and sex machine.

5.1. Cleaning and Hygiene

1. Always unplug the sex machine and controller from the power source before cleaning.
2. Pay attention to hygiene. Wash all accessories (attachments, etc.) thoroughly before and after each use.
3. Use a mild soap and water solution for cleaning. Avoid harsh chemicals or abrasive cleaners.
4. Wipe the controller and machine surfaces with a clean, damp cloth. Ensure no moisture enters the electronic components.
5. Dry all parts completely before storage.

5.2. Storage

1. Store the controller and machine in a cool, dry, and well-ventilated area.
2. Keep the circuit part of the controller away from water to prevent circuit faults.
3. Avoid exposing the controller to extreme temperatures or direct sunlight.

6. Troubleshooting

If you encounter issues with your FREDORCH controller, refer to the following common problems and solutions:

• Machine not responding to controller:
  - Ensure the controller is correctly connected to the machine.
  - Check if the power adapter is securely plugged in and the power switch is on.
  - For wireless remotes, ensure the receiver board is properly installed and powered.
  - Verify that the remote control batteries are not depleted.
• Machine overheating:
  - It is normal for the machine to get warm after prolonged use. However, to prevent damage, avoid continuous use for more than 60 minutes. Allow the machine to cool down between sessions.
• Reduced motor life or damage:
  - Avoid holding back the telescopic shaft's thrusting motion for extended periods, as this can strain the motor.
• Machine not usable after sitting on it:
  - Do not sit on the machine completely, as this can damage the machine stand and render it unusable.
• Incompatibility/Incorrect part received:
  - Always verify the model number and type of controller needed for your specific FREDORCH sex machine model before purchasing. If you received a part that does not match your order or is incompatible, contact customer support immediately.

If problems persist, please contact customer support for further assistance.

7. Specifications

The following are general specifications for the FREDORCH controllers and compatible machines. Specific models may have slight variations.

8. Warranty and Support

FREDORCH is committed to providing quality products and customer satisfaction. If you encounter any issues with your product, please contact the seller directly.

• Contacting Support: If you have any problems with your item, please contact the seller before leaving a review or feedback. The seller aims to respond within 24 hours and provide a solution to the problem.
• Feedback: If you are satisfied with your product, consider leaving an unbiased and honest review. Your positive feedback and a 5-star rating are greatly appreciated and encourage continuous improvement.

9. User Tips

• Verify Compatibility: Always double-check that the controller model you are ordering or using is compatible with your specific FREDORCH sex machine model. Discrepancies between ordered and received items can lead to frustration.
• Proper Lubrication: For optimal performance and hygiene, always use a suitable lubricant with your sex machine and its attachments.
• Stable Placement: Ensure the sex machine is placed on a smooth, stable surface to maximize the effectiveness of suction cups and overall operation.
• Regular Cleaning: Consistent cleaning of all parts before and after use is crucial for hygiene and product longevity.

10. Frequently Asked Questions (FAQ)

Q: My remote control isn't working. What should I do?

A: First, ensure the remote's batteries are fresh. Check that the receiver board (if applicable) is correctly connected and powered. Also, verify that the remote is compatible with your specific machine model. If issues persist, refer to the Troubleshooting section or contact support.

Q: Can I use any FREDORCH controller with any FREDORCH machine?

A: No, different machine models require different controller accessories. It is essential to confirm compatibility before purchasing or using a controller. Refer to the product description or contact the seller for clarification.

Q: Is the remote control waterproof?

A: No, the remote control is not waterproof. Please keep it away from water and do not submerge it.

Q: How do I enter frequency conversion mode?

A: While the machine is powered on, press the 'MODE' button three times in quick succession. Press the shutdown button to exit this mode. It is recommended to use normal mode first before trying frequency conversion mode.