FLIPSKY V4PLUS+VX2

Contents

User Manual: Dual FSESC4.20 Plus & VX2 Remote Control Combo

Brand: FLIPSKY | Model: V4PLUS+VX2

1. Introduction

Thank you for choosing the Flipsky Dual FSESC4.20 Plus Speed Controller and VX2 Remote Control combo. This powerful and versatile system is designed for electric skateboards, scooters, ebikes, and other ESK8 applications, offering precise control and robust performance. This manual will guide you through the setup, operation, and maintenance of your new speed controller and remote.

2. Product Overview

2.1 Components Included

  • Dual FSESC4.20 Plus Speed Controller
  • VX2 Remote Control
  • VX2 Remote Receiver Module
  • Connection Cables (for FSESC and remote receiver)
  • USB Cable (for FSESC configuration)
  • Wrist Strap (for VX2 Remote)
Flipsky Dual FSESC4.20 Plus and VX2 Remote Control Combo Kit

Figure 1: Complete Combo Kit including FSESC, VX2 Remote, and accessories.

2.2 Key Features

  • Integrated anti-spark switch function on the PCBA for enhanced safety.
  • Compact design for easier integration into various enclosures.
  • Heatsink included for efficient thermal management.
  • Real-time data display on the VX2 Remote's 0.95" OLED screen.
  • Support for 3 speed modes and cruise control.
  • Remote and E-skateboard power indication lights.
  • Rechargeable Li-ion battery for the VX2 Remote with up to 12 hours of working time.
Dual FSESC4.20 Plus Speed Controller and VX2 Remote Control

Figure 2: The Dual FSESC4.20 Plus Speed Controller and VX2 Remote Control.

3. Specifications

3.1 Dual FSESC4.20 Plus Speed Controller

ParameterValue
Hardware VersionV4.20
Firmware Version3.40 (Upgradable)
Continuous Current (Single/Dual)50A / 100A
Burst Current (Single/Dual)150A / 300A
Voltage Range8V - 60V (3-13S LiPo)
BEC Output5V @ 1.5A
BEC TypeInternal driver support
Operating ModesDC, BLDC, FOC (sinusoidal)
TimingSoftware calibration
Cutoff VoltageProgrammable
FrequencyPWM input
Reverse FunctionYes
Regenerative BrakingYes
Dimensions (with heatsink)64 x 84 x 20.5mm
MaterialMetal
Dual FSESC4.20 Plus Speed Controller with dimensions (64x84x20.5mm)

Figure 3: Dimensions of the Dual FSESC4.20 Plus Speed Controller.

3.2 VX2 Remote Control

ParameterValue
Bandwidth2.4Ghz
Display0.95" OLED (Real-time data)
Speed Modes3 modes supported
Cruise ControlSupported
Power IndicationRemote and E-skateboard
Battery TypeRechargeable Li-ion
Battery LifeUp to 12 working hours
VX2 Remote Control with OLED display showing real-time data

Figure 4: The VX2 Remote Control with its OLED display.

4. Setup and Installation

Proper installation is crucial for the safe and optimal performance of your electric vehicle. Please follow these guidelines carefully.

4.1 Wiring the Dual FSESC4.20 Plus

  1. Motor Connections: Connect your brushless motors to the motor phase wires (typically A, B, C or U, V, W) on the FSESC. Ensure correct phasing for smooth operation.
  2. Battery Connection: Connect your battery pack (3-13S LiPo, 8V-60V) to the main power input of the FSESC. The FSESC has an integrated anti-spark switch, so external anti-spark solutions are not strictly necessary but can be used for added protection.
  3. Receiver Connection: Connect the VX2 remote receiver module to the appropriate UART or PPM port on the FSESC using the provided cables. Refer to the FSESC port labels for correct orientation.
  4. Optional Connections: If using additional accessories (e.g., lights, external BEC), connect them to the available ports as per your vehicle's design.
Top view of the Dual FSESC4.20 Plus Speed Controller

Figure 5: Top view of the FSESC, showing various connection points.

4.2 Pairing the VX2 Remote Control

The VX2 Remote Control and its receiver typically come pre-paired. If re-pairing is necessary:

  1. Ensure the FSESC is powered on and the receiver is connected.
  2. Turn on the VX2 Remote Control.
  3. Follow the pairing instructions provided with the VX2 Remote, usually involving pressing a button on the receiver and then on the remote within a short timeframe.
  4. Confirm successful pairing by checking the remote's OLED display for connection status and real-time data.
VX2 Remote Control and its receiver module with wiring

Figure 6: VX2 Remote Control and its receiver module.

4.3 Initial Configuration (FSESC)

The FSESC requires configuration using VESC Tool software (available from VESC Project website) to match your specific motor and battery setup. This involves:

  • Connecting the FSESC to your computer via the provided USB cable.
  • Running the motor detection wizard in VESC Tool.
  • Setting battery parameters (cell count, voltage limits).
  • Configuring control modes (e.g., current control, duty cycle control).
  • Adjusting braking and acceleration curves to your preference.

Always perform initial configuration and testing in a safe, controlled environment with the wheels off the ground.

5. Operation

5.1 VX2 Remote Control Functions

  • Throttle Wheel: Controls acceleration and braking. Push forward for acceleration, pull back for braking.
  • Speed Mode Button: Cycle through 3 different speed modes (e.g., low, medium, high) to match your riding style and environment.
  • Cruise Control Button: Activates/deactivates cruise control, maintaining a constant speed.
  • OLED Display: Provides real-time data such as speed, battery level (remote and vehicle), distance, and current.
  • Power Indication Lights: Monitor the battery status of both the remote and your electric vehicle.

5.2 Powering On/Off

  1. To Power On: Ensure all connections are secure. Press the power button on your electric vehicle (connected to the FSESC). Then, turn on the VX2 Remote Control.
  2. To Power Off: First, turn off the VX2 Remote Control. Then, power off your electric vehicle.

Always ensure the remote is turned on before operating the vehicle to prevent unexpected acceleration or braking.

6. Maintenance

  • Keep Clean and Dry: Regularly clean the FSESC and remote to prevent dust and debris buildup. Avoid exposure to water or excessive moisture.
  • Inspect Connections: Periodically check all wiring connections for looseness or damage. Secure any loose connections.
  • Remote Battery Charging: Charge the VX2 Remote's Li-ion battery using the provided USB cable when the battery indicator is low. Avoid overcharging or deep discharging.
  • Firmware Updates: Check the Flipsky website or VESC Project for the latest firmware updates for the FSESC. Updating firmware can improve performance and add new features.
  • Storage: When not in use for extended periods, store the components in a cool, dry place. For the remote, ensure its battery is at a partial charge (around 50%) before long-term storage.

7. Troubleshooting

  • No Power: Check battery connections, ensure the anti-spark switch is engaged, and verify the battery is charged.
  • Remote Not Connecting: Ensure the remote and receiver are powered on and within range. Attempt to re-pair the remote and receiver if necessary.
  • Motor Not Spinning/Irregular Behavior: Verify motor phase wire connections. Re-run motor detection in VESC Tool. Check for any error codes displayed on the remote or in VESC Tool.
  • Unexpected Acceleration/Braking: Immediately release the throttle and power off the system. Check remote calibration and receiver connections. Ensure no interference is present.
  • Overheating: Ensure the FSESC has adequate airflow. Check motor current limits in VESC Tool. Reduce load or riding intensity if persistent.

For more detailed troubleshooting or specific error codes, please refer to the VESC Tool documentation or contact Flipsky support.

8. User Tips

  • Start with Low Speed Modes: Especially for new users or new builds, begin with the lowest speed mode on the VX2 remote to familiarize yourself with the vehicle's response.
  • Regular VESC Tool Checks: Periodically connect your FSESC to VESC Tool to monitor motor temperatures, battery health, and check for any logged faults.
  • Secure All Components: Ensure the FSESC, receiver, and all wiring are securely mounted and protected from vibrations and impacts within your vehicle's enclosure.
  • Practice in Open Areas: Always practice operating your electric vehicle in open, safe areas away from traffic and pedestrians until you are fully comfortable with its controls.

9. Support

For technical assistance, warranty information, or further inquiries, please visit the official Flipsky website or contact their customer support. Always provide your product model (V4PLUS+VX2) and a detailed description of your issue when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.