1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Recordio GAX-CT6 6 Channel Audio Mixing Console. Please read this manual thoroughly before using the product to ensure proper and safe operation.

2. Safety Information
To prevent electric shock, fire, or injury, please observe the following safety precautions:
- Do not expose this appliance to rain or moisture.
- Do not remove the cover or back panel. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Ensure the power supply voltage matches the requirements specified on the unit.
- Do not place the unit near heat sources or in direct sunlight.
- Always disconnect the power cable before cleaning or when not in use for extended periods.
- Avoid spilling liquids into the unit.

3. Package Contents
Verify that all items are included in your package:
- 1x Recordio GAX-CT6 Professional Mixer
- 1x Power Cable

4. Product Overview
The Recordio GAX-CT6 is a professional 6-channel audio mixing console designed for various audio applications, including live performances, recording, and DJing. It features multiple input options, 3-band equalization per mono channel, integrated effects, USB playback, and Bluetooth connectivity.
4.1 Front Panel Controls and Connections

- MIC/LINE Inputs (Channels 1-6): XLR and 1/4" TRS jacks for microphones and line-level instruments.
- GAIN Control: Adjusts the input sensitivity for each channel.
- HIGH/MID/LOW EQ: 3-band equalizer for tone shaping on mono channels.
- AUX: Auxiliary send control for external effects or monitor mixes.
- EFF: Effect send control for internal effects.
- PAN: Adjusts the stereo position of the channel.
- PEAK LED: Indicates when the input signal is too high.
- CHANNEL FADER: Controls the volume level of each channel.
- PEL (Pre-fader Listen) Switch: Routes the channel signal to the headphones for monitoring before the fader.
- +48V Phantom Power: Supplies power to condenser microphones.
4.2 Master Section and Output Connections

- MP3 Display & Controls: For USB playback and Bluetooth functions.
- USB Socket: For connecting USB drives.
- PHONES: Headphone output for monitoring.
- AUX/RETURN: Auxiliary input/return for external devices.
- OUTPUT (L/R): Main stereo outputs (XLR).
- CTRL OUT: Control room outputs.
- REC: Stereo recording output (RCA).
- PLAY: Stereo playback input (RCA).
5. Setup Guide
5.1 Power Connection
- Ensure the mixer's power switch is in the OFF position.
- Connect the provided power cable to the AC input on the rear panel of the mixer.
- Plug the other end of the power cable into a suitable AC power outlet (AC100-240V).
- Turn on the power switch. The POWER LED will illuminate.
5.2 Connecting Audio Sources

- Microphones: Connect dynamic or condenser microphones to the XLR inputs (MIC) on channels 1-6. If using condenser microphones, activate the +48V Phantom Power switch (located near the master section).
- Line-Level Instruments: Connect instruments like guitars, keyboards, or other line-level devices to the 1/4" TRS LINE inputs on channels 1-6.
- External Devices (AUX/PLAY): Use the RCA inputs (PLAY) to connect external playback devices like CD players or media players.
- USB Playback: Insert a USB flash drive into the USB socket for playing audio files.
- Bluetooth: Pair your Bluetooth-enabled device with the mixer for wireless audio streaming.
5.3 Connecting Outputs
- Main Speakers: Connect your main speakers or power amplifier to the XLR L/R OUTPUT jacks.
- Headphones: Plug your headphones into the PHONES jack for monitoring.
- Monitor Speakers: Connect monitor speakers to the CTRL OUT jacks.
- Recording Device: Connect a recording device to the REC RCA outputs.
6. Operating Instructions
This section details the basic operation of your mixing console.
6.1 Basic Mixing
- Set GAIN: Adjust the GAIN knob for each active channel until the PEAK LED flashes only occasionally during the loudest parts of the signal.
- Adjust EQ: Use the HIGH, MID, and LOW knobs to shape the tone of each channel.
- Set PAN: Position the sound in the stereo field using the PAN knob.
- Adjust Channel Faders: Slowly raise the channel faders to bring the sound into the mix.
- Master Volume: Adjust the main L/R faders to control the overall output volume.
6.2 USB Playback

- Insert a USB flash drive containing MP3 files into the USB socket.
- The MP3 display will show "USB Player".
- Use the MP3 controls (play/pause, next/previous track) to navigate and play your audio files.
- Adjust the dedicated MP3 volume control to blend the USB audio into your mix.
6.3 Bluetooth Connectivity

- Press the mode button on the MP3 player section until "Bluetooth" is displayed.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices.
- Select "GAX-CT6" (or similar name) from the list to pair.
- Once paired, you can stream audio wirelessly from your device to the mixer.
- Adjust the dedicated MP3 volume control to blend the Bluetooth audio into your mix.
6.4 Effects (EFF SEND, DELAY, REPEAT)
The mixer includes 16 integrated delay effects. Use the EFF SEND knob on each channel to send a portion of that channel's signal to the internal effects processor. Adjust the DELAY and REPEAT knobs in the master section to control the characteristics of the chosen effect.
6.5 Monitoring
Use the PHONES output to monitor the main mix or individual channels (via the PEL switch) through headphones. The main level meters provide a visual indication of the output signal level.
6.6 Operational Demonstration Video
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners or solvents.
- Dust: Keep the mixer free from dust. Use compressed air to clean vents and around faders/knobs if necessary.
- Storage: When not in use, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
- No Power:
- Check if the power cable is securely connected to both the mixer and the power outlet.
- Ensure the power switch on the rear panel is in the ON position.
- Verify the power outlet is functional.
- No Sound Output:
- Check all input and output cable connections.
- Ensure channel faders and main L/R faders are raised.
- Verify that the correct input source is selected (e.g., USB, Bluetooth).
- Check the GAIN settings for each channel and ensure PEAK LEDs are not constantly lit.
- Ensure external speakers/amplifiers are powered on and connected correctly.
- Humming/Noise:
- Check for loose cable connections.
- Ensure proper grounding of all equipment.
- Try using balanced cables (XLR or TRS) where possible.
- Reduce GAIN levels if the signal is too hot.
- Bluetooth Not Connecting:
- Ensure the mixer is in Bluetooth mode.
- Make sure your device's Bluetooth is enabled and within range.
- Forget the device on your phone/tablet and try pairing again.
- Is this a powered mixer?
The GAX-CT6 is a mixing console, not a powered mixer with a built-in amplifier for passive speakers. It requires an external power amplifier or active (powered) speakers for sound output. It operates on AC power (AC100-240V) and does not have a built-in battery.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | GAX-CT6 |
| Type | Mixers |
| Brand Name | Recordio |
| Power Source | AC&DC (AC100-240V AC power supply) |
| Built-in Battery | No |
| Maximum Microphone Input Level | +24dBu |
| Maximum Line Input Level | +24dBu |
| Maximum Output Level (XLR) | +26dBu |
| Main Level Meter | 10-segment LED, -24dB to CLIP |
| Frequency Response | 20Hz-30Khz±0.5dB |
| Maximum Power Input Power | 15W |
| Total Chopping Distortion (RHD+N) | <0.01% |
| Crosstalk (1kHz) | fader off >85dB, channel >82dB |
| Noise (22Hz-22KHz) | Equivalent input noise -122dBu, Remaining output noise <-90dBu |
| Mono/Stereo Channel EQ | High frequency +/-15dB (12KHz), Low frequency +/-15dB (80KHz), High IF +/-15dB (2.5KHz) |
| 2-Track Return | RCA lotus seat, unbalanced, 4K ohm, -2dBu |
| 2-Track Transmission | RCA lotus seat, unbalanced, <75 ohm, -2dBu |
| L/R Output | XLR, balanced, tip hot end, <75 ohm, +4dBu, max +22dBu |
| FX/AUX Output | TRS, unbalanced, tip hot end, <75 ohm, -2dBu, max +18dBu |
| Headphones | TRS, Tip L, Ring R, Recommended 30 to 600 ohm headphones |
| Dimension (L x W x H) | 342mm x 340mm x 37mm |
| Material | Metal+plastic |
| Input Channel | 6 channels |
| Supply Voltage Phantom | +48 V |
| Integrated Delay Effects | 16 |
| Player Module | MP3 |
| Certification | CE |

10. User Tips
- Sound Quality: For optimal sound quality, ensure all cables are securely connected and use balanced cables for longer runs to minimize noise. Adjust GAIN levels carefully to avoid clipping (indicated by the PEAK LED).
- Versatility: This mixer is suitable for a variety of uses, from home recording to small live events. Experiment with the EQ and effects to find the best sound for your application.
- Monitoring: Utilize the PEL switch and headphone output to pre-listen to individual channels before bringing them into the main mix, which is crucial for live sound and recording.
11. Warranty and Support
For warranty information and technical support, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.