CUSTOM SW-616

Contents

CUSTOM Multi Coin Acceptor 616 User Manual

Electronic Coin Acceptor Selector Mechanism for Vending Machines and Arcade Games

1. Product Overview

The CUSTOM Multi Coin Acceptor 616 is an advanced electronic coin selector designed for automatic selling systems, vending machines, and arcade games. It is capable of accepting up to 6 different types of coins or tokens simultaneously, offering high accuracy and reliability. This manual provides detailed instructions for installation, configuration, and maintenance.

Video: Unboxing and overview of the Multi Coin Acceptor 616.

Multi Coin Acceptor 616 with packaging and accessories

Image: The Multi Coin Acceptor 616, its packaging, and included accessories.

2. Specifications

FeatureSpecification
Model NumberSW-616
Type6 Values Multi Coin Acceptor
Identify Accuracy Rate95%
Recognition Rate99.5%
Recognition Speed≤0.6 seconds
Applicable Coin DiameterФ17mm - Ф29mm
Applicable Coin Thickness1.8mm - 3.0mm
Working VoltageDC+12V ± 10%
Working Current50mA
Moment Maximum Current350mA (less than 0.5S)
Atmospheric Pressure80Kpa - 106Kpa
Humidity≤95%
Storing Temperature-20℃ to +85℃
Operating Temperature-15℃ to +60℃
Casing MaterialPC Plastic
PanelElectroplate
OutputPulse
OriginMainland China

The coin acceptor is suitable for all kinds of coins and foreign currencies within the specified diameter and thickness ranges.

3. Installation and Wiring

Proper installation and wiring are crucial for the coin acceptor's functionality. Ensure the device is securely mounted and all connections are correct.

Multi Coin Acceptor 616 with wiring harness and mounting screws

Image: The coin acceptor with its included wiring harness and mounting screws.

Rear view of the Multi Coin Acceptor 616 showing internal components

Image: Rear view of the coin acceptor, detailing internal components and connection points.

Side view of the Multi Coin Acceptor 616 illustrating coin path

Image: Side view of the coin acceptor, showing the internal mechanism for coin acceptance.

3.1 Component Identification

Labeled diagram of Multi Coin Acceptor 616 external features and controls

Diagram: External features and controls of the Multi Coin Acceptor 616.

No.NameFunction
12 section switchSets for different coins of two countries or regions (A or B).
24 pin socketDC12V, COIN, GNO (Ground), COUNTRE (Counter).
32 section switchNO (normally open), NC (normally closed).
43 section switchSignal width: 20ms (fast), 50ms (medium), 100ms (slow).
52 pin socketSignal of forbidden energy inputting. Up PIN: signal inputting (voltage > 4V is OK). Down PIN: ground wire (0V is forbidden).
62 pin socketElectromagnetism gate DC12V.
7LED lightMatches up with instruction if light 8.
8Inching buttonSetting key SET.
9Changing 8 Nixie tubeShows display status.
10Inching buttonStatus shows numerical value "+".
11Inching buttonStatus shows numerical value "-".
12SlitCoin insertion slot.
13Coins returning KeyButton to return inserted coins.
14Coins returning mouthExit for returned coins.
15Electromagnetism gateMechanism for eliminating false coins.
16Cheat-defending functionMechanism for defending against speculation/cheating.
17RS232 communication portFor connecting an external 232 transfer slab to output 232 level information (optional).
18Paralleling outletSignal paralleling outlet (optional).
Internal mechanism diagram of Multi Coin Acceptor 616 with numbered parts

Diagram: Internal mechanism and numbered parts of the coin acceptor.

4. Operation and Configuration

4.1 Initial Setup (Setting Parameters)

To configure the coin acceptor, you will use the setting keys and the display panel. This process allows you to define the characteristics of the coins to be accepted.

  1. Simultaneously press the accurating key (10) and the broaden key (11) on the display panel for approximately 2 seconds. The letter "A" will appear on the display panel. (This indicates the system is ready for internal numerical value setup, specifically when the A/B file turns to A).
  2. Press the setting key (8). The letter "E" will appear, indicating the currency system selection. Use the accurating key (10) or broaden key (11) to increase or decrease the numerical value (1-6 for different currency values). Press the setting key (8) again to confirm.
  3. The letter "H" will appear, representing the quantity of sampling for various currency values (1-20 pieces). Adjust as needed using keys (10) or (11), then confirm with key (8).
  4. The letter "P" will appear, representing the numerical value for signal output of various currency values (1-20). Adjust and confirm.
  5. The letter "F" will appear, representing the precision of various currency values (1-20). A smaller number indicates higher precision. A suggested value is 8. Adjust and confirm.
  6. After setting all parameters, the letter "E" will be shown. Turn off the power to the unit and then turn it back on for the settings to take effect.

4.2 Setting Coin Samples

After setting the general parameters, you need to teach the coin acceptor to recognize specific coins by providing samples.

  1. Press the setting key (8). The letter "A" will be shown. Press the setting key (8) again, and "A1" will appear. The first LED light will be continuously on. At this point, insert 20 sample coins of the first type at a constant speed. (This assumes H1 was set to 20 during parameter setup).
  2. After inserting the coins, the LED lights will flicker. When "A2" is shown and the first two LED lights are on, insert 20 sample coins of the second type at a constant speed. (Assumes H2 was set to 20).
  3. Continue this process for "A3" and subsequent coin types, inserting 20 sample coins for each. Once all required coin types have been sampled, all LED lights will flicker several times, indicating that the setup is complete and the unit is ready for normal operation.

5. Maintenance

To ensure optimal performance and longevity of your Multi Coin Acceptor 616, regular maintenance is recommended:

  • Cleaning: Periodically clean the coin insertion slot (12) and the coin path to prevent blockages from dust, dirt, or foreign objects. Use a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Inspection: Regularly inspect the wiring harness for any signs of wear, damage, or loose connections.
  • Coin Quality: Ensure that only clean, undamaged coins or tokens are used. Bent, dirty, or counterfeit coins can reduce accuracy and cause jams.
  • Environmental Conditions: Operate the coin acceptor within the specified operating temperature and humidity ranges to prevent damage.

6. Troubleshooting

If you encounter issues with your Multi Coin Acceptor 616, refer to the following common problems and solutions:

  • Coins not accepted:
    • Check if the coin samples have been correctly set (refer to Section 4.2).
    • Ensure the coin diameter and thickness are within the specified range (17-29mm diameter, 1.8-3.0mm thickness).
    • Inspect the coin path for any obstructions or foreign objects.
    • Verify the power supply (DC+12V ± 10%) is stable and correctly connected.
  • Incorrect coin recognition:
    • Re-calibrate the coin samples (Section 4.2) for better accuracy.
    • Adjust the "F" (precision) parameter during initial setup (Section 4.1). A smaller value increases precision.
    • Ensure the coins used are not damaged or excessively worn.
  • Coin jams:
    • Clear any obstructions in the coin path.
    • Ensure coins are inserted smoothly and not forced.
    • Check for bent or unusually shaped coins.
  • No power/display:
    • Check the DC12V power connection.
    • Ensure the wiring harness is securely connected.

7. Warranty and Support

This product is designed for durability and reliable performance. For any technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

  • Manufacturer: CUSTOM (as per product title)
  • Model: SW-616
  • Contact: Refer to your purchase documentation for specific support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.