1. Introduction
This manual provides essential information for the safe and effective use of your GlintDeer A830L LCD Digital Multimeter. Please read all instructions carefully before operation to ensure proper functionality and prevent damage.
The A830L is a versatile digital multimeter designed for accurately measuring various electrical parameters including DC/AC current, voltage, resistance, and for testing diodes, transistors, and battery levels. It features a luminous display with a backlight function and a continuity buzzer, making it a reliable tool for electrical appliance repair, household wiring, and general electronic troubleshooting.

Figure 1: GlintDeer A830L Digital Multimeter with included accessories.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Do not use with incompatible devices or accessories to avoid affecting product performance or damaging related equipment.
- If the product shows any abnormal conditions such as smoke, unusual noises, or odors, immediately stop using it.
- This product is not food-related. Keep it away from children and avoid accidental ingestion or touching of sharp parts (if any).
- Always ensure the test leads are correctly inserted into the appropriate jacks for the measurement being performed. Incorrect connection can lead to damage or injury.
- Never attempt to measure voltage or current beyond the specified maximum limits of the device.
- Exercise extreme caution when working with live electrical circuits. Always assume circuits are live until proven otherwise.
- Ensure the multimeter's battery is adequately charged for accurate readings. A low battery indicator will appear when replacement is needed.
3. Product Overview
3.1. Components
- Digital Multimeter Unit
- Test Leads (Red and Black)
- User Manual (this document and PDF)
3.2. Front Panel Layout

Figure 2: Front Panel Overview
The front panel includes:
- LCD Display: Shows measurement readings. Note that two types of LCD displays (right tilt or vertical) are randomly sent, but functionality is identical.
- Function Range Dial: Used to select the desired measurement function and range.
- HOLD Button: For data retention, freezes the current reading on the display.
- Backlight Button: Activates/deactivates the display backlight.
- Triode Socket (hFE): For testing NPN/PNP transistors.
- Input Jacks:
- VΩmA: Input for voltage, resistance, and current (up to 200mA).
- COM: Common (ground) input for all measurements.
- 10A: Input for high DC current measurements (up to 10A).
3.3. Physical Features
- Back Support Frame: Allows the multimeter to stand upright for easier viewing during operation.

Figure 3: Back Support Frame
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | A830L |
| Display Type | Digital Display |
| Operating Mode | Manual Range |
| Operating Temperature | 0 - 50 ℃ |
| Dimensions | 142 x 69 x 13 mm (approx. 5.6 x 2.7 x 0.5 inches) |
| DC Voltage (DCV) | 200mV, 2V, 20V, 200V, 500V |
| AC Voltage (ACV) | 200-600V ±1.0 % |
| DC Current (DCA) | 2m-20m-200m-10A ±1.8% |
| Resistance (OHM) | 200-2K-20K-200K-2MΩ ±1.0% |
| Measuring Capacitance Range | 2nF-200µF (as interpreted from '2NF-200/F') |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Transistor Test (hFE) | Yes |
| Battery Test | 1.5V |
| Data Hold | Yes |
| Back-light Function | Yes |
| Power | 9V Battery (not included) |
| Certification | CE |

Figure 4: Multimeter Dimensions
5. Setup
5.1. Battery Installation
- Ensure the multimeter is turned OFF.
- Locate the battery compartment on the back of the device.
- Open the battery cover (usually secured by a screw).
- Insert a new 9V battery, observing the correct polarity.
- Close the battery cover and secure it with the screw.
5.2. Connecting Test Leads
- Insert the black test lead into the 'COM' (Common) jack.
- For most measurements (voltage, resistance, diode, small current), insert the red test lead into the 'VΩmA' jack.
- For high DC current measurements (up to 10A), insert the red test lead into the '10A' jack.
Video 1: Demonstration of test lead connection and basic measurements.
5.3. Initial Preparation
- Remove any protective films from the device, especially from the LCD screen.
6. Operating Instructions
Turn the function dial to the desired measurement mode. Ensure test leads are connected correctly for the selected function.
6.1. Measuring DC Voltage (DCV)
- Set the function dial to the 'V=' (DC Voltage) range. Select an appropriate range (e.g., 20V for a 9V battery).
- Connect the red test lead to the positive (+) terminal and the black test lead to the negative (-) terminal of the circuit or component.
- Read the voltage value on the LCD display.

Figure 5: DC Voltage Measurement Example (9V battery)
6.2. Measuring AC Voltage (ACV)
- Set the function dial to the 'V~' (AC Voltage) range. Select an appropriate range (e.g., 600V for household outlets).
- Connect the test leads across the AC voltage source.
- Read the voltage value on the LCD display.

Figure 6: AC Voltage Measurement Example (Wall Outlet)
6.3. Measuring DC Current (DCA)
- IMPORTANT: To measure current, the multimeter must be connected in series with the circuit. Never connect it in parallel across a voltage source when in current mode.
- Set the function dial to the 'A=' (DC Current) range. For currents greater than 200mA, move the red test lead to the '10A' jack.
- Break the circuit and connect the multimeter in series.
- Read the current value on the LCD display.

Figure 7: DC Current Measurement Example
6.4. Measuring Resistance (Ω)
- Set the function dial to the 'Ω' (Resistance) range.
- Ensure the circuit is de-energized before measuring resistance.
- Connect the test leads across the component whose resistance you want to measure.
- Read the resistance value on the LCD display.
6.5. Diode Test
- Set the function dial to the diode symbol (►|).
- Connect the red test lead to the anode and the black test lead to the cathode of the diode. A forward voltage drop will be displayed.
- Reverse the leads. The display should show 'OL' (Open Loop) or '1' for a good diode.

Figure 8: Diode Measurement Example
6.6. Continuity Test
- Set the function dial to the continuity symbol (sound wave icon).
- Connect the test leads across the circuit or component.
- If there is continuity (low resistance), the buzzer will sound.
6.7. Transistor Test (hFE)
- Set the function dial to the 'hFE' position.
- Identify if the transistor is NPN or PNP.
- Insert the transistor's Emitter (E), Base (B), and Collector (C) pins into the corresponding holes in the triode socket.
- The display will show the hFE (DC current gain) value.
6.8. 1.5V Battery Test
- Set the function dial to the '1.5V' battery symbol.
- Connect the red test lead to the positive (+) terminal and the black test lead to the negative (-) terminal of the 1.5V battery.
- The display will show the battery's voltage. A reading of no less than 3.8mA is considered good for a 1.5V battery.
6.9. Data Hold and Backlight
- HOLD Button: Press this button to freeze the current reading on the display. Press again to release.
- Backlight Button: Press this button to turn the display backlight ON or OFF, useful in low-light conditions.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the multimeter. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the 9V battery to prevent leakage.
- Battery Replacement: Replace the 9V battery when the low battery symbol appears on the display to ensure accurate measurements.
- Fuse: The device may contain an internal fuse (e.g., F500mA/250V for mA range, 10A for 10A range) to protect against overcurrent. If the current measurement function stops working, the fuse might need replacement. Consult a qualified technician if you suspect a blown fuse.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Multimeter does not turn on or display is blank. | Dead or improperly installed 9V battery. | Check battery polarity and ensure it is fully charged. Replace if necessary. |
| Inaccurate readings. | Low battery, incorrect range selection, or faulty test leads. | Replace battery. Select the correct measurement range. Check test leads for damage. |
| No reading for current measurement. | Blown fuse, incorrect test lead connection, or circuit not in series. | Ensure test leads are in the correct jacks (VΩmA or 10A). Connect multimeter in series with the circuit. Check/replace internal fuse if applicable (consult technician). |
| Continuity buzzer is silent or very quiet. | Low battery or internal issue. | Replace battery. If problem persists, contact support. |
| Display shows 'OL' or '1' when it shouldn't. | Open circuit, out of range, or incorrect function selected. | Check circuit connections. Select a higher range if applicable. Ensure correct function is selected. |
9. User Tips
- Battery Not Included: Remember to purchase a 9V battery separately as it is not included in the package.
- Value for Money: Many users find this multimeter to be an excellent product for its price, performing well for basic electrical tasks.
- Backlight and Buzzer: The backlight function is highly appreciated for working in various lighting conditions, and the continuity buzzer provides clear audible feedback.
- LCD Display Variation: Be aware that the LCD display might have a slightly different visual style (right-tilted digits or vertical digits), but this does not affect the functionality.
10. Warranty & Support
For detailed warranty information, technical support, or service inquiries, please refer to the official user manual PDF or contact the manufacturer directly.
Manufacturer & EU Representative Information:
- Country: China
- Telephone: 86-13417026232
- Email: xinhui0518@163.com
- Responsible Person: Ouyanghui
- EU Representative: eVatmaster Consulting GmbH
- EU Representative Address: Bettinastr. 30, 60325 Frankfurt am Main, Germany
- EU Representative Email: contact@evatmaster.com
- EU Representative Telephone: +49-6995179070
A digital version of the user manual is available for download: GlintDeer A830L User Manual (PDF)