Introduction
Thank you for choosing the Sunbuck AV-MP326BT Karaoke Sound Amplifier. This 2.1 channel high-power amplifier is designed to deliver excellent audio performance for your home entertainment or car audio system. Featuring FM radio, USB/SD card playback, MP3 compatibility, a 10-segment audio equalizer, and Bluetooth connectivity, it offers versatile options for your audio needs. This manual provides essential information for safe and optimal use of your amplifier.
Package Contents
- 1 x Sunbuck AV-MP326BT Karaoke Sound Amplifier
- 1 x Remote Control
- 1 x Instruction Manual
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Sunbuck |
| Model Number | AV-MP326BT (also AV-326BT) |
| Channels | 3 (2.1) |
| Maximum Power Per Channel | Above 200W (Rated: 200W + 200W) |
| Rated AC Voltage | 110V / 220V-240V (selectable) |
| DC Voltage Input | DC 12V |
| Rated Frequency | 20KHz |
| Distortion Rate | 0.5% |
| Signal to Noise Ratio | 90dB |
| Impedance | 4-16 Ohm |
| Amplifier Type | HIFI amplifier |
| Dimensions (L x W x H) | 29cm x 24cm x 10cm |
| Package | Yes |
| Certification | CE |
The amplifier is designed to connect two main speakers and one active subwoofer.

Setup Instructions
Before connecting, ensure the amplifier is powered off and unplugged from the main power source.

Front Panel Controls:
- Power Switch: Turns the amplifier on or off.
- Microphone Jacks (MIC1-MIC4): Connect up to four microphones for karaoke.
- MIC Treble Adjustment: Adjusts the high frequencies for microphone input.
- MIC Bass Adjustment: Adjusts the low frequencies for microphone input.
- Music Bass Adjustment: Adjusts the low frequencies for music playback.
- SD Socket: Insert an SD card for audio playback.
- Left and Right Balance: Adjusts the balance between the left and right audio channels.
- Previous Song: Skips to the previous track during USB/SD/Bluetooth playback.
- Mode/Function Switch: Selects input source (e.g., FM, USB, SD, Bluetooth, Line In).
- LED Display: Shows current mode, track information, and other status indicators.
- Pause/Playback: Plays or pauses the current track during USB/SD/Bluetooth playback.
- USB Port: Connect a USB drive for audio playback.
- MIC Volume Adjustment: Controls the overall volume of the microphone inputs.
- Input Audio Switching: Selects between different audio input sources (e.g., A, B, Line).
- Total Volume Adjustment (Music Vol): Controls the overall volume of the music playback.
- Next Song: Skips to the next track during USB/SD/Bluetooth playback.
- Single Song Loop (Repeat): Repeats the current track.
- 10-Band Equalizer Adjustment: Fine-tunes specific frequency bands for customized sound.
Rear Panel Connections:
- FM ANT: Connect the included FM antenna for radio reception.
- AUDIO INPUT (A, B, LINE): RCA jacks for connecting external audio sources (e.g., CD player, DVD player, TV).
- AUDIO OUTPUT (R, L): RCA jacks for connecting to another amplifier or recording device.
- SPEAKER SYSTEM (R, L): Red and black terminals for connecting passive speakers. Ensure correct polarity (+ to + and - to -).
- POWER DC12V/5A INPUT: Connect a 12V DC power supply for car use or specific applications.
- POWER SOURCE (AC): Connect the AC power cord (220V-240V / 110V, depending on model/selection).
Connection Steps:
- Speakers: Connect your passive speakers to the SPEAKER SYSTEM (R, L) terminals on the rear panel. Ensure proper polarity.
- Active Subwoofer (Optional): Connect the AUDIO OUTPUT (R, L) to the input of your active subwoofer.
- Audio Input: Connect your audio source (e.g., phone, TV, DVD player) to the AUDIO INPUT (A, B, or LINE) RCA jacks.
- Microphones: Plug your microphones into the Microphone Jacks (MIC1-MIC4) on the front panel.
- FM Antenna: Connect the FM antenna to the FM ANT terminal.
- Power: Connect the appropriate power source:
- For AC power, plug the power cord into the POWER SOURCE (AC) inlet and then into a wall outlet.
- For DC 12V power, connect a 12V DC power supply to the POWER DC12V/5A INPUT.
Operating Instructions
- Power On: Flip the Power Switch (1) to the 'ON' position. The LED display (10) will light up.
- Select Input Source: Press the Mode/Function Switch (9) repeatedly to cycle through available input sources (FM, USB, SD, Bluetooth, Line In). Alternatively, use the Input Audio Switching (14) knob to select between RCA inputs A, B, or Line.
- Adjust Music Volume: Use the Total Volume Adjustment (Music Vol) (16) knob to set the desired music playback volume.
- Adjust Microphone Volume: If using microphones, use the MIC Volume Adjustment (13) knob to set the microphone volume.
- Microphone Effects: Adjust the MIC Treble Adjustment (3) and MIC Bass Adjustment (4) for desired vocal tone. Use the ECHO and DELAY knobs (not explicitly numbered but visible on the diagram) to add effects to your vocals.
- Equalizer Adjustment: Use the 10-Band Equalizer Adjustment (18) sliders to fine-tune the audio frequency response to your preference.
- USB/SD Playback: Insert a USB drive into the USB Port (12) or an SD card into the SD Socket (6). The amplifier will automatically switch to USB/SD mode and begin playback. Use the Previous Song (8), Next Song (17), and Pause/Playback (11) buttons to control playback. Press the Single Song Loop (17) button to repeat the current track.
- Bluetooth Pairing: Select Bluetooth mode using the Mode/Function Switch (9). On your mobile device, search for 'Sunbuck' or similar and pair. Once connected, you can stream audio wirelessly.
- FM Radio: Select FM mode using the Mode/Function Switch (9). The amplifier will automatically scan for stations or you can manually tune.
- Power Off: Flip the Power Switch (1) to the 'OFF' position when not in use.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or abrasive materials.
- Ventilation: Ensure the amplifier has adequate ventilation. Do not block the ventilation openings on the top or sides.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight, high temperatures, and humidity.
- Power Cord: Regularly inspect the power cord for any damage. If damaged, replace it with an appropriate cord.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power switch off; No power from outlet. | Check power cord connection; Turn power switch on; Test outlet with another device. |
| No sound output | Incorrect input selected; Speaker wires loose/incorrectly connected; Volume too low; Mute activated. | Select correct input source; Check speaker connections and polarity; Increase volume; Ensure not muted. |
| Humming or static noise | Poor cable shielding; Ground loop issue; Interference from other electronics. | Use shielded audio cables; Ensure proper grounding; Move amplifier away from other electronic devices; Check for loose connections. |
| Microphone not working | Microphone not plugged in; MIC volume too low; Microphone faulty. | Ensure microphone is fully plugged into a MIC jack; Increase MIC volume; Test with another microphone. |
| USB/SD playback issues | Unsupported file format; USB/SD card faulty; Incorrect mode selected. | Ensure audio files are in a supported format (e.g., MP3); Try a different USB/SD card; Select USB/SD mode. |
| Bluetooth connection fails | Amplifier not in Bluetooth mode; Device too far; Interference. | Ensure amplifier is in Bluetooth mode; Move device closer; Restart both devices. |
User Tips
- Versatile Power Options: The amplifier supports both 110V and 220V AC power, and also features a 12V DC input, making it suitable for various regions and even for use in a car.
- Powerful Output: With a rated power of 200W + 200W and a maximum power per channel above 200W, this amplifier delivers robust sound for your speakers.
- 2.1 Channel Configuration: The amplifier is designed for a 2.1 channel setup, allowing you to connect two main passive speakers and an active subwoofer for enhanced bass. The 'LINE' output on the rear panel can be used to connect to an active subwoofer.
- Addressing Hum/Noise: If you experience a strong hum or static noise, first check all audio cable connections to ensure they are secure. Consider using higher quality, shielded audio cables to minimize interference. Also, ensure proper grounding and try to keep the amplifier away from other electronic devices that might cause electromagnetic interference.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.