AZDOME WR03

Contents

AZDOME WR03 1080P AHD Car Rear View Camera Instruction Manual

For AZDOME PG17, GS63H Car DVR, and compatible dashcams

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AZDOME WR03 1080P AHD Car Rear View Camera. Please read this manual carefully before installation and use to ensure proper functionality and safety. This camera is designed to provide a clear rear view for parking assistance and recording when connected to a compatible car DVR or mirror dashcam.

2. Package Contents

Please check the package for the following items:

  • 1 x AZDOME WR03 Rear Camera
  • 1 x Video Cable (available in 6m or 10m length)
  • 1 x Sticker (for mounting)
  • 2 x Screws (for mounting)

3. Specifications

FeatureSpecification
ModelAZDOME WR03
Effective Pixels4-PIN 1080P (HD 1080P)
Lens MaterialPlastic + Glass
Shell MaterialPlastic (ABS)
Viewing Angle170°
Guiding LineYes
Waterproof ClassIP67
PowerDC 12V (for rear light connection)
Jack Connection2.5mm (DC 5V)
Video Cable Length6M or 10M options
AGC (Automatic Gain Control)Auto
BLC (Backlight Compensation)Auto
White BalanceAuto
Video ColorColorful
CertificationCE, RoHS
CompatibilityFor AZDOME PG17, PG16, M300S, GS63H

4. Setup & Installation

Before installation, ensure the camera is compatible with your car mirror or dashcam. The camera uses a 4-pin connector and a 2.5mm jack for video signal and power to the dashcam, and a separate wire for connection to the car's reverse light.

4.1 Camera Placement

The rear camera can be installed in various locations depending on your vehicle and preference:

  • Inside the rear windshield: Provides a protected installation.
  • Above the license plate: Offers a clear view of the area directly behind the vehicle.
Diagram showing suggested installation locations for front and rear cameras, including inside the rear windshield and above the license plate, with wiring to the reverse light.
Figure 1: Suggested Camera Installation Locations and Reverse Light Connection

4.2 Wiring Connections

Follow these steps for wiring the camera:

  1. Connect to Dashcam: The camera's main cable connects to your dashcam via a 4-pin connector and a 2.5mm jack. The 2.5mm jack provides DC 5V power to the camera from the dashcam.
  2. Connect to Vehicle's Reverse Light: The red wire extending from the camera's cable needs to be connected to the positive ('+') pole of your car's taillight (reverse light). This connection enables the reversing assist feature when the vehicle is in reverse gear.
Detailed diagram of the 4-pin connector showing pin assignments: 4 Black-GND, 2 Red-DC5V, 1-NC, 3 Yellow-AV.
Figure 2: 4-Pin Connector Pinout Diagram
Image showing the 4-pin connector and a 2.5mm jack, indicating compatibility with 4-Pin Jack Cable Connector.
Figure 3: 4-Pin Connector and 2.5mm Jack Compatibility
Image of the AZDOME WR03 camera with its 6-meter cable and 2.5mm jack, labeled '4Pin -12V- 6M'.
Figure 4: AZDOME WR03 Camera with 6M Cable

5. Operating Instructions

5.1 Powering On

The camera powers on automatically when your compatible dashcam or mirror DVR is turned on, typically with the vehicle's ignition.

5.2 Reversing Assist

When the red wire is correctly connected to your car's reverse light, the camera will automatically display the rear view with guiding lines on your dashcam screen when you shift into reverse gear. This feature aids in safe parking and maneuvering.

Image showing the camera's clear picture quality with parking lines, highlighting its effectiveness day or night due to SONY IMX 307 sensor.
Figure 5: Clear Picture Quality with Guiding Lines (SONY IMX 307)

5.3 Video Quality

The AZDOME WR03 provides 1080P AHD video quality, offering a significantly clearer and more detailed image compared to standard 720P cameras, both during the day and at night.

Comparison image showing the difference between 1080P and 720P video quality in a city street scene, with 1080P being noticeably clearer.
Figure 6: 1080P vs. 720P Picture Quality Comparison

6. Maintenance

To ensure the longevity and optimal performance of your camera, follow these maintenance guidelines:

  • Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid using abrasive cleaners.
  • Checking Connections: Periodically inspect all cable connections to ensure they are secure and free from corrosion or damage.
  • Environmental Factors: While the camera is IP67 waterproof, extreme temperatures or prolonged exposure to harsh weather conditions can affect its performance.

7. Troubleshooting

If you encounter issues with your AZDOME WR03 camera, refer to the following common problems and solutions:

  • No Image Display:
    • Ensure the camera is correctly connected to your dashcam and the dashcam is powered on.
    • Check the 4-pin and 2.5mm jack connections for looseness or damage.
    • Verify that the red wire is properly connected to the car's reverse light and that the reverse light is functioning.
    • Confirm your dashcam settings are configured to display the rear camera input.
  • Flickering or Distorted Image:
    • Check for loose cable connections.
    • Ensure the power supply to the camera (DC 5V from dashcam, DC 12V from reverse light) is stable.
    • Interference from other electronic devices in the vehicle might be a cause; try rerouting cables if possible.
  • Guiding Lines Not Appearing:
    • Confirm the red wire is securely connected to the positive terminal of the reverse light.
    • Ensure your dashcam supports and is configured to display guiding lines from the rear camera.

8. User Tips

Based on common user inquiries, here are some helpful tips:

  • Compatibility Check: Always verify the camera's compatibility with your specific dashcam model (e.g., AZDOME PG12, M550, GS63H, PG02, PG17, M300S) before purchasing and installing. The camera is designed for AZDOME PG17, PG16, and M300S, but compatibility with other models should be confirmed.
  • Cable Length: Choose the appropriate video cable length (6m or 10m) based on your vehicle's size and desired routing to avoid excess slack or insufficient reach.
  • Professional Installation: If you are unsure about electrical wiring or routing cables through your vehicle, consider professional installation to prevent damage to your car or the camera.

9. Warranty and Support

Your AZDOME WR03 Rear View Camera comes with a manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.