GODIAG SK348

Contents

GODIAG Test Platform kEY Pro Adapter for BMW FEM/ BDC Programming with OBD2 to OBD25 Cable

Model: SK348 | Brand: GODIAG

1. Introduction

The GODIAG FEM/BDC Test Platform is a specialized tool designed for BMW FEM/BDC immobilizer system programming. It facilitates key programming directly on the workbench via OBD, eliminating the need for repeated disassembly and installation of the control unit in the vehicle. This platform is an essential tool for locksmiths and automotive maintenance engineers.

Key Features:

  • Provides easy and convenient connection for FEM/BDC immobilizer systems.
  • Enables synchronization testing for programmed FEM/BDC modules and keys.
  • Offers a dedicated test environment for professional FEM/BDC recycling.
  • Assists in verifying correct synchronization between FEM/BDC and keys.
  • Connects FEM/BDC modules with various diagnostic instruments.
  • User-friendly design with high quality.
GODIAG FEM/BDC Adapter for BMW
GODIAG FEM/BDC Adapter for BMW

2. Package Contents

Ensure all the following items are present in your package:

  • 1 x GODIAG For BMW FEM/BDC Programming Test Platform
  • 1 x GODIAG OBD2 to OBD25 Cable

3. Product Structure and Dimensions

GODIAG FEM/BDC Programming Test Platform Structure
Diagram of the GODIAG FEM/BDC Programming Test Platform with labeled components.
  1. DB25 female connector (for connecting to GODIAG GT100 DB25 male port)
  2. Ignition simulated start switch
  3. Immobilizer dashboard simulated indicator
  4. Key sensing area
  5. Screw bolt
  6. CON7 connector
  7. Source connection port
  8. Appearance (general view)
  9. CON8 connector
GODIAG FEM/BDC Programming Test Platform Dimensions
The test platform measures approximately 50cm (19.68 inches) in length.

4. Setup Instructions

Follow these steps to set up the GODIAG FEM/BDC Test Platform for use:

  1. Connect Jumper Cables to ECU: Following the provided wiring diagram, connect the colored jumper cables to the ECU. Ensure correct pin assignments for CAN H (Pin 68), CAN L (Pin 67), and GND (Pin 1).
    ECU connection with jumper cables
    Connect the colored jumper cables to the ECU according to the wiring diagram.
  2. Connect Test Platform to ECU: Connect the appropriate connectors (CON7, CON8, Odometer, Power) from the test platform to the corresponding ports on the FEM/BDC module. The dedicated OEM FEM/BDC fast connectors ensure a stable and reliable connection without damaging pins.
    Test platform connected to FEM/BDC module
    Connect the test platform to the FEM/BDC module using the labeled connectors.
  3. Connect Diagnostic Tool: Use the OBD 2-in-1 extension cable to connect the GODIAG GT100 (or similar compatible device) to your diagnostic tool, such as ThinkCar Pro, Xhorse Key Tool Plus Pad, VVDI2, or Autel IM608.
    GT100 connected to diagnostic tablet
    The GT100 connected to a diagnostic tablet for programming.
  4. Power On: Plug the power adapter into the GT100. Turn on the power switch of the GT100, then the ECU power switch, and finally the ignition switch.

5. Operating Instructions

This section outlines the general operation for key programming and diagnostics using the GODIAG FEM/BDC Test Platform in conjunction with a compatible diagnostic tool.

Key Programming and Diagnostics Workflow:

  1. Download and Install App: Open the Google Play Store (or equivalent app store) on your diagnostic tablet and search for the "ThinkCar" app (or the app corresponding to your diagnostic tool). Download and install it.
  2. Connect and Power On: Ensure the GODIAG Test Platform is correctly connected to the FEM/BDC module and powered on as described in the Setup section.
  3. Launch Diagnostic App: Open the installed diagnostic app on your tablet.
  4. Vehicle Identification: The app will attempt to auto-detect the VIN. If auto VIN identification fails, you will be prompted to manually select your car model.
  5. System Selection: Navigate to the "All System Diagnostic" or "System Selection" menu within the app. Choose the relevant module, such as "01 Engine Control Module 1" or "02 Transmission Control Module".
  6. Perform Diagnostics/Programming: Depending on your task, select options like "Read DTC" (Diagnostic Trouble Codes), "Clear Fault Code", "Read Data Stream", or specific key programming functions.
  7. Generate Report: After completing the diagnostic or programming process, the app can generate a diagnostic report detailing the findings or programming status.
Video demonstrating the connection process and reading DTCs using the GODIAG GT100 with a diagnostic app.

Synchronization Test:

Before reinstalling the FEM/BDC module into the car, use the test platform to verify that the newly programmed key synchronizes correctly with the FEM/BDC module. Place the key in the key sensing area (4) on the platform and observe the immobilizer dashboard simulated indicator (3).

Key in sensing area for synchronization test
Place the key in the sensing area to test synchronization.

6. Specifications

AttributeValue
Brand NameGODIAG
Model NameSK348
Item TypeCar Diagnostic Cables and Connectors
Item NameGT100 AUTO TOOLS OBD II Break Out Box ECU Connector
FunctionECU Connector
FeatureCompatible with a lot of devices
Hardware VersionLatest
Software VersionProgramming Test Platform
External Testing CertificationCE
Item Weight1kg
Item Height24inch
Item Width8inch
Item Length12inch
MaterialBest Quality
PerformanceExcellent
OriginMainland China
Is Batteries IncludedNo
High-concerned chemicalNone
UseNot Telecommunication
ElectronicNo

7. Troubleshooting

  • Key Programming: This platform is specifically designed for BMW FEM/BDC key programming. It can be used to program duplicate keys or add new keys for compatible BMW models. It is not suitable for programming keys for other car brands like Chevrolet Matiz.
  • Compatibility with Diagnostic Tools: The GODIAG FEM/BDC Test Platform is compatible with various diagnostic tools such as Xhorse Key Tool Plus Pad, VVDI2, and Autel IM608. If you encounter issues, ensure your diagnostic tool's software is up to date.
  • VIN Identification Failure: If the diagnostic app fails to auto-detect the VIN, you will be prompted to manually select your car model. Proceed with manual selection to continue the diagnostic or programming process.
  • Key Not Starting Car: If a programmed key does not start the car, use the synchronization test feature on the test platform to determine if the issue is a mismatch between the FEM/BDC module and the key.

8. Maintenance

To ensure the longevity and optimal performance of your GODIAG FEM/BDC Test Platform, follow these maintenance guidelines:

  • Keep the device clean and free from dust and debris.
  • Store the device in a dry environment, away from moisture and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Regularly check cables and connectors for any signs of wear or damage.

9. User Tips

  • For lost keys, car owners can remove the FEM/BDC module and the corresponding ECU, then send them to a locksmith. The locksmith can then program a new key and perform a synchronization test on the workbench using this platform before the module is reinstalled in the car.
  • Always ensure your diagnostic software is updated to the latest version for the best compatibility and functionality.
  • When connecting, utilize the dedicated OEM connectors to prevent damage to the FEM/BDC module's communication pins.

10. Warranty and Support

The GODIAG FEM/BDC Test Platform comes with a one-year warranty. For technical support, product inquiries, or warranty claims, please contact your official GODIAG dealer or the manufacturer's customer service channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.