1. Introduction
The VONTAR G20BTS Plus and G20S PRO are advanced wireless remote controls designed for a seamless user experience with various smart devices. These remotes combine a 2.4G wireless connection with a 6-axis gyroscope for precise air mouse functionality, a built-in microphone for voice search, and a backlit keypad for ease of use in low-light conditions. Additionally, they feature IR learning capabilities for controlling your device's power and mute functions.
2. Model Comparison
The G20S series offers different models with varying features. Please refer to the comparison chart below to understand the distinctions between the G20S, G20S Pro, and G20S Pro BT (G20BTS Plus) models.
| Feature | G20S | G20S Pro | G20S Pro BT (G20BTS Plus) |
|---|---|---|---|
| 2.4G Wireless | Yes | Yes | Yes |
| BT Wireless | No | No | Yes |
| Gyroscope | Yes | Yes | Yes |
| Voice Search (Mic) | No | Yes | Yes |
| Backlight | No | Yes | Yes |
| IR Learning | Power | Power & Mute | Power & Mute |
| Number keys | No | Yes | Yes |
| USB Receiver | Yes | Yes | Yes |
3. Product Overview: Button Functions
Familiarize yourself with the buttons and their corresponding functions on your VONTAR G20S Pro remote control.
- Power: Turns the device on/off (IR learning capable).
- Mic: Activates voice input.
- Indicator: LED light for status.
- Mute: Mutes/unmutes audio (IR learning capable).
- IR Learning Key: Used for infrared programming.
- Mouse On/Off: Toggles the air mouse function.
- Pg+ (Page Up): Scrolls up.
- Pg- (Page Down): Scrolls down.
- Navigation Keys (Up/Down/Left/Right): Navigates menus.
- OK / Enter / Mouse Left: Confirms selection or acts as left mouse click.
- Return / Mouse Right: Goes back or acts as right mouse click.
- Home: Returns to the home screen.
- Open Google Voice Assistant: Activates Google Assistant.
- Volume -: Decreases volume.
- Volume +: Increases volume.
- Play/Pause: Controls media playback.
- Previous: Skips to the previous track/item.
- Next: Skips to the next track/item.
- Number Keys (0-9): For direct input.
- BackSpace: Deletes characters.
- Menu: Opens menu options.
- Backlight Toggle: Press and hold this button for 3 seconds to turn the backlight on/off.
4. Setup
4.1. Battery Installation
The remote control requires 2 AAA batteries (not included). Open the battery compartment cover on the back of the remote and insert the batteries, ensuring correct polarity (+/-). Close the cover securely.
4.2. Connecting via 2.4G Wireless (All Models)
For 2.4G wireless functionality, plug the included USB dongle into a USB port on your Android TV Box, Mini PC, PC, or Tablet. The remote control should automatically connect. No additional drivers are typically required.
4.3. Connecting via Bluetooth (G20S Pro BT / G20BTS Plus Only)
The G20S Pro BT (G20BTS Plus) model supports Bluetooth 5.0 connectivity. This allows operation without the USB dongle, especially useful for devices with limited USB ports or built-in Bluetooth.
- Ensure your device's Bluetooth is enabled.
- On the G20S Pro BT remote, press and hold the OK and Return buttons simultaneously for a few seconds to clear any previous pairing information and enter pairing mode. The indicator light will flash.
- On your device (e.g., Android TV), go to Bluetooth settings and search for available devices.
- Select "G20S Pro" or a similar name from the list to pair.
- Once paired, the indicator light on the remote will stop flashing.
Note: When the USB dongle is inserted, the G20S Pro BT model can work in both BT5.0 and 2.4G wireless modes. Without the USB dongle, it operates only via BT5.0.
5. Operating Instructions
5.1. Air Mouse Function
The remote is equipped with a 6-axis gyroscope, allowing you to control a cursor on your screen by moving the remote in the air. Press the "Mouse On/Off" button to activate or deactivate the air mouse function. When active, simply point and move the remote to control the cursor.
5.2. Voice Control (Google Assistant)
The built-in high-fidelity voice microphone allows you to use voice commands. Press the "Open Google Voice Assistant" button and speak your command clearly into the remote. This feature is compatible with Google Assistant and can be used for searching content on platforms like YouTube, Google Play Movies & TV, and Google Play Music.
5.3. Backlight Function
To activate or deactivate the backlight on the buttons, press and hold the dedicated backlight button (located near the '0' key) for 3 seconds. The laser-engraved characters on the buttons will illuminate, providing visibility in dark environments.
6. IR Learning Function
The G20S Pro and G20BTS Plus models support IR learning for the Power and Mute buttons, allowing them to mimic functions from your original TV remote. The G20S model only supports IR learning for the Power button.
Steps for IR Learning:
- Step 1: Press and hold the "Power" button on the G20S Pro remote for 3 seconds. The red indicator light will flash slowly, indicating it has entered IR learning state.
- Step 2: Point the infrared emitter of your original remote control directly at the infrared receiver of the G20S Pro remote (approximately 2-3cm apart). Press the desired button (e.g., Power or Mute) on your original remote.
- Step 3: After the G20S Pro receives the infrared code, the red indicator light will go out after flashing, indicating that the infrared programming is completed.
You can repeat steps 1-2 for the "Mute" button if your model supports it.
7. User Tips
- Battery Life: To maximize battery life, ensure the remote is turned off or in standby mode when not in use. The standby current is very low (<20uA), but continuous active use (e.g., air mouse, backlight) will consume more power. Replace AAA batteries when performance degrades.
- Air Mouse Sensitivity: If the air mouse cursor is too fast or too slow, check your device's settings for mouse sensitivity adjustments.
- Voice Command Clarity: For best results with voice control, speak clearly and directly into the microphone, avoiding background noise.
- Compatibility: Always verify compatibility with your specific device model. While broadly compatible with Android TV Boxes, Mini PCs, PCs, and Tablets, some specific devices may have limitations.
8. Specifications
| Parameter | Value |
|---|---|
| Transmission Method | 2.4G RF Wireless (G20S, G20S Pro, G20BTS Plus), BT5.0 (G20BTS Plus only) |
| Sensors | 6-axis Gyroscope |
| Number of Keys | 30 |
| Range | >10m |
| Battery Type | AAA*2 (not included) |
| Material | ABS Plastic and Silicone |
| Dimensions | 160 x 42 x 18 mm |
| Weight | 55g |
| Mode | GFSK |
| Frequency | 2400-2483.5GHz |
| Voltage | 3.0V |
| Working Current | <15mA |
| Standby Current | <20uA |
| Certification | CE |
9. Troubleshooting
- Remote not responding:
- Check if batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure the USB dongle is securely plugged into your device's USB port (for 2.4G models).
- For G20BTS Plus, ensure it's correctly paired via Bluetooth or the USB dongle is connected.
- Try restarting your device (e.g., Android TV Box).
- Voice control not working:
- Ensure the remote is within range and has a clear line of sight (if using IR for basic functions).
- Verify that your device supports Google Assistant or similar voice input and that it's configured correctly.
- The voice remote control is NOT compatible with Amazon Fire TV, Fire TV Stick, or some Samsung, LG, Sony, and Mi smart TVs/Mi TV Boxes.
- Air mouse cursor erratic or not moving:
- Ensure the air mouse function is activated (Mouse On/Off button).
- Calibrate the gyroscope if available in your device's settings, or try restarting the remote by removing and reinserting batteries.
- IR learning not successful:
- Ensure the original remote's IR emitter is pointed directly at the G20S Pro's IR receiver, and they are 2-3cm apart.
- Make sure the original remote has working batteries.
- Only the Power and Mute buttons (or just Power for G20S) can be programmed via IR learning.
10. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries promptly when they are depleted to prevent leakage, which can damage the remote. If the remote will not be used for an extended period, remove the batteries.
11. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.
12. Package Contents
Upon opening your product package, you should find the following items:
- 1 x VONTAR G20S Pro Voice Remote Control
- 1 x USB Nano Receiver (for 2.4G wireless models)
- 1 x User Manual