Introduction
The Recordio GAX-215 is a professional dual 15-band graphic equalizer and effects processor designed for precise audio control in various applications, including live sound, studio recording, and DJ setups. This manual provides essential information for setting up, operating, and maintaining your GAX-215 equalizer to ensure optimal performance and longevity.


Safety Information
Please read all safety instructions before operating the device. Keep this manual for future reference.
- Do not expose the unit to rain or moisture.
- Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
- Ensure proper ventilation to prevent overheating.
- Connect to a grounded power outlet.
Setup
The GAX-215 is designed for easy integration into your audio system. Follow these steps for proper setup:
- Unpacking: Carefully remove the equalizer from its packaging. Inspect for any signs of damage.
- Placement: Place the unit in a stable, well-ventilated area. It is designed for 19-inch rack mounting (1U height).
- Power Connection: Connect the provided power cable to the power socket on the rear panel of the GAX-215 and then to a suitable power outlet (110-220V).
- Audio Connections:
The GAX-215 features dual channels with both XLR and 1/4" TRS/Jack input and output connectors. - Connect your audio source (e.g., mixer, instrument) to the INPUT connectors of Channel 1 and/or Channel 2 using appropriate XLR or 1/4" cables.
- Connect the OUTPUT connectors of Channel 1 and/or Channel 2 to your amplifier or next audio device in the signal chain using appropriate XLR or 1/4" cables.



Operating Instructions
The GAX-215 offers precise control over your audio frequencies. Familiarize yourself with the front panel controls:
- Power Switch: Located on the front panel, use this to turn the unit ON/OFF.
- Input Gain Control: Adjusts the input level for each channel. The GAX-215 offers a 12 dB input gain range.
- Output Level Display: LED indicators show the output level (-10, 0, +10, +18 dBu).
- EQ Bypass Button: Engages or bypasses the graphic equalizer section in the signal path.
- Low Cut Filter: Activates a 50 Hz 12dB/octave Bessel high-pass filter to remove unwanted low-frequency rumble.
- Range Switch: Selects either +/- 6 dB or +/- 12 dB slider boost/cut range for the frequency bands.
- 15-Band Equalizer Sliders: Each channel has 15 sliders, allowing you to boost or cut specific frequencies (25 Hz to 16 kHz) to shape your sound.


Video Demonstration
Video 1: A short demonstration of the GAX-215 Graphic Equalizer's features and controls.
Maintenance
To ensure the longevity and optimal performance of your GAX-215 equalizer, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure that the ventilation slots are not obstructed. Proper airflow prevents overheating.
- Storage: When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Management: Keep audio and power cables organized and free from kinks or excessive tension to prevent damage.
Troubleshooting
If you encounter issues with your GAX-215, refer to the following common troubleshooting steps:
- No Power: Check the power cable connection to both the unit and the wall outlet. Ensure the power switch is in the 'ON' position.
- No Sound: Verify all audio cables are securely connected to the correct input and output jacks. Check the input gain and output levels. Ensure the EQ Bypass button is not engaged if you expect equalization effects.
- Distorted Sound: Reduce the input gain or output level if the 'CLIP' indicator lights up frequently. Check for proper impedance matching with connected devices.
- Hum or Noise: Ensure all connections are secure and properly grounded. Try using different cables or power outlets to rule out external interference.
Specifications

| Feature | Description |
|---|---|
| Model Number | GAX-215 |
| Type | Effects Processors, Graphic Equalizer |
| Channel | Dual channel |
| Equalizer Bands | 15-band per channel (2/3-octave constant Q) |
| Input Connectors | 1/4" TRS, female XLR (pin 2 hot) |
| Input Type | Electronically balanced/unbalanced, RF filtered |
| Input Impedance | Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input | >+21dBu balanced or unbalanced |
| CMRR | >40dB, typically >55dB at 1kHz |
| Output Connectors | 1/4" TRS, male XLR (pin 2 hot) |
| Output Type | Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | Balanced 100 ohm, unbalanced 50 ohm |
| Max Output | >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | <10Hz to >50kHz, +0.5/-3dB |
| Dynamic Range | Typically >112dB |
| Signal to Noise Ratio | Typically >95dB |
| THD+Noise | <0.003% |
| Interchannel Crosstalk | <-90dB, 20Hz to 20kHz |
| Bypass Switch | Bypasses the graphic equalizer section in the signal path |
| Low Cut Switch | Activates the 50Hz 12dB/octave Bessel high-pass filter |
| Range Switch | Selects either +/- 6dB or +/- 12dB slider boost/cut range |
| Operating Voltage | 100VAC–240VAC 50/60Hz |
| Power Consumption | 15W |
| Power Connector | IEC receptacle |
| Unit Weight | 2.9 kg (6.4 lbs) |
| Shipping Weight | 2.9 kg (6.4 lbs) |
| Dimensions (H x D x W) | 4.4 cm (1.75") x 15.24 cm (6") x 48.26 cm (19") |
| Single Package Size | 56.5 x 29.5 x 6 cm |
User Tips
- Dual Channel Operation: The GAX-215 is a dual-channel equalizer, meaning both channels can operate simultaneously and independently. This allows for stereo equalization or processing two separate mono signals.
- Start with Flat Settings: When first adjusting, set all EQ sliders to the '0' position and the gain to unity (0 dB). Make small, incremental adjustments to achieve the desired sound.
- Use Low Cut Filter: Engage the 50 Hz Low Cut filter to remove unwanted low-frequency rumble or stage noise, especially in live sound applications, to clean up the overall mix.
Warranty and Support
The Recordio GAX-215 comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact Recordio Official Store customer service. Do not attempt to disassemble or repair the unit yourself, as this will void the warranty.
Additionally, the product offers free returns within 90 days of purchase, subject to the seller's return policy.