Recordio GAX-802D

Contents

Recordio GAX-802D Professional 8 Channel Digital Audio Mixer Console

Model: GAX-802D | Brand: Recordio

1. Introduction

This manual provides detailed instructions for the safe and effective operation of your Recordio GAX-802D Professional 8 Channel Digital Audio Mixer Console. This versatile mixer is designed for various audio applications, including karaoke, live performances, and studio recording, offering 8 input channels, digital effects, and built-in phantom power. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. Safety Information

  • Electrical Safety: Always connect the mixer to a grounded power outlet. Do not expose the unit to rain or moisture. Do not open the casing; there is a risk of electric shock. Refer all servicing to qualified personnel.
  • Ventilation: Ensure adequate ventilation around the unit. Do not block the cooling fan or radiating holes. Overheating can damage the device.
  • Power Source: This unit operates on AC power (110V-220V). Ensure the voltage switch (if present) is set correctly for your region before connecting to power.
  • Placement: Place the mixer on a stable, flat surface. Avoid placing it near heat sources, direct sunlight, or areas with excessive dust or vibration.
  • Cables: Use only high-quality audio and power cables. Ensure all connections are secure before powering on the unit.
Rear view of the mixer showing power input, speaker outputs, cooling fan, and caution label regarding electric shock.

Figure 2.1: Rear panel with power input, speaker outputs, and cooling fan. Note the electrical caution label.

3. Package Contents

Please check that all items listed below are included in your package:

  • 1 x Recordio GAX-802D Mixing Console
  • 1 x Power Adapter
  • 1 x User Manual (English)
Power adapter cable for the mixer.

Figure 3.1: Included Power Adapter.

4. Product Features

  • 8-Channel Mixer: Features mono microphone inputs and stereo line inputs.
  • Digital Effects: Built-in 16 kinds of LCD digital display effects.
  • Phantom Power: Integrated +48V phantom power for condenser microphones.
  • Equalization: Built-in five-band graphic equalizer and 3-band EQ on mono channels.
  • Audio Outputs: 2 line (L/R) audio outputs, 1 send output, 1 return input, and a stereo mix output.
  • Headphone Monitoring: High-fidelity headphone output (1W) with dedicated monitoring function.
  • Media Playback: USB/SD/MMC card slot for direct audio playback.
  • Voltage Compatibility: 110V-220V voltage change-over switch for global use.
  • Monitor Switch: Each channel includes a monitor switch.
Angled view of the mixer highlighting its professional amplifier mixer capabilities, 8 channels, and USB functionality.

Figure 4.1: The GAX-802D Professional Amplifier Mixer.

5. Controls and Connections Overview

Familiarize yourself with the various controls and connection points on your mixer:

5.1 Front Panel

Front view of the Recordio GAX-802D mixer showing all channels, faders, knobs, and the digital display.

Figure 5.1: Front Panel Layout.

  • CH1-CH8 Inputs:
    • MIC (XLR): Balanced inputs for microphones.
    • LINE (1/4" TRS): Balanced inputs for line-level instruments or devices.
    • TRIM: Adjusts the input gain for each channel.
    • HI, MID, LOW: 3-Band Equalizer for high, mid, and low frequencies.
    • AUX: Sends signal to an auxiliary output (e.g., external monitor).
    • EFF: Sends signal to the built-in digital effects processor.
    • PAN: Adjusts the stereo position (left/right) of the channel.
    • PFL: Pre-Fader Listen button for monitoring the channel's signal before the fader.
    • Fader: Controls the volume level of the individual channel.
  • Media Section:
    • USB/SD/MMC Card Slot: For playing audio files from storage devices.
    • Media Controls: Play/Pause, Next, Previous, Mode selection buttons.
    • Digital Display: Shows effect number, playback status, or mode (e.g., "BLUE" for Bluetooth).
  • Effects Section (16 DSP):
    • SEND/EFF: Controls the overall level of the digital effects.
    • REPEAT: Adjusts the repetition rate of the selected effect.
    • UP/DOWN: Selects one of the 16 digital multi-effects.
  • Graphic Equalizer: 5-band sliders for fine-tuning the main mix frequency response (70Hz, 200Hz, 1KHz, 5KHz, 12KHz).
  • Phantom Power (+48V): Switch to activate +48V phantom power for condenser microphones. An indicator light shows when it's active.
  • PHONE LEVEL: Controls the volume of the headphone output.
  • PHONES: 1/4" TRS output for headphones.
  • Output Level Display (L+R): LED meters indicating the main stereo output level.
  • LEFT MAIN / RIGHT MAIN Faders: Controls the overall volume of the main stereo output.
  • AUX IN (L/R): RCA inputs for connecting external stereo audio sources.
  • REC (L/R): RCA outputs for connecting to a recording device.
  • SEND OUT (L/R): Outputs for sending signal to external processors or monitors.
Close-up of the mixer's digital display, DSP effects, graphic equalizer, phantom power, phone level, and output level display. Also shows the cooling fan.

Figure 5.2: Detail of Digital Display, Effects, and Equalizer.

Close-up of the mixer's faders, highlighting the straight slide fader design for precise control.

Figure 5.3: Straight Slide Faders for volume control.

5.2 Rear Panel

Rear view of the mixer showing power input, speaker outputs, cooling fan, and caution label regarding electric shock.

Figure 5.4: Rear Panel Layout.

  • POWER Switch (ON/OFF): Main power switch for the unit.
  • AC INPUT/FUSE: Power input socket and fuse holder.
  • SPEAKER OUTPUT (RIGHT/LEFT): 1/4" TS and Speakon outputs for connecting passive speakers.
  • Cooling Fan: Ensures proper heat dissipation during operation.

6. Setup Instructions

  1. Unpack the Mixer: Carefully remove the GAX-802D mixer and all accessories from its packaging.
  2. Power Connection:
    • Ensure the mixer's power switch is in the OFF position.
    • Connect the provided power adapter cable to the AC INPUT/FUSE port on the rear panel.
    • Plug the other end of the power adapter into a suitable grounded electrical outlet.
    • If your unit has a voltage change-over switch, ensure it is set to the correct voltage for your region (110V or 220V) before powering on.
  3. Speaker Connection:
    • Connect your passive speakers to the SPEAKER OUTPUT (RIGHT/LEFT) jacks on the rear panel using appropriate 1/4" TS or Speakon cables. Ensure correct polarity.
  4. Input Connections:
    • Microphones: Connect dynamic or condenser microphones to the MIC (XLR) inputs on the front panel. For condenser microphones, ensure the +48V Phantom Power is activated after connecting the microphone.
    • Line-level Instruments/Devices: Connect instruments (keyboards, guitars with preamps, etc.) or other audio sources (CD players, media players) to the LINE (1/4" TRS) inputs.
    • Auxiliary Devices: For additional stereo input, connect devices to the AUX IN (L/R) RCA inputs.
  5. Headphone Connection: Plug your headphones into the PHONES 1/4" TRS output.
  6. Initial Power On: Once all connections are secure, flip the POWER switch on the rear panel to the ON position. The power indicator and digital display should illuminate.

Video 6.1: Product demonstration showing setup and basic operation.

7. Operating Instructions

  1. Adjusting Input Levels (TRIM):
    • Before playing any audio, ensure all channel faders and the main faders are at their lowest setting.
    • Speak into the microphone or play your instrument. Slowly increase the TRIM knob for that channel until the signal is strong but the peak LED does not light up consistently.
  2. Channel Equalization:
    • Use the HI, MID, and LOW knobs on each channel to shape the tone of your input source. Turn clockwise to boost frequencies, counter-clockwise to cut.
  3. Applying Effects (DSP):
    • Use the UP/DOWN buttons in the 16 DSP section to browse through the available digital effects. The selected effect number will be shown on the display.
    • Increase the EFF knob on the desired channel to send its signal to the effects processor.
    • Adjust the main SEND/EFF knob to control the overall level of the effect in the mix.
    • The REPEAT knob can be used to modify the characteristics of certain effects, such as delay repeats.
  4. Stereo Panning (PAN):
    • Turn the PAN knob left or right to position the channel's sound in the stereo output.
  5. Monitoring (PFL & Headphones):
    • Press the PFL button on a channel to solo its signal through your headphones, allowing you to set the TRIM level accurately without affecting the main mix.
    • Adjust the PHONE LEVEL knob for comfortable headphone listening.
  6. Adjusting Channel and Main Volume:
    • Slowly raise the individual channel faders to bring each input into the mix.
    • Adjust the LEFT MAIN and RIGHT MAIN faders to control the overall output volume to your speakers. Monitor the Output Level Display to avoid clipping.
  7. Using the Graphic Equalizer:
    • Use the 5-band sliders to make overall tonal adjustments to the main mix. This is useful for room correction or general sound shaping.
  8. USB/SD/MMC Playback:
    • Insert your USB drive or SD/MMC card. The mixer should automatically detect it and begin playback.
    • Use the media control buttons to navigate tracks, play/pause, and switch modes (e.g., USB, SD, Bluetooth).
  9. Recording:
    • Connect your recording device to the REC (L/R) RCA outputs. The signal sent to these outputs is typically the main stereo mix.
Collage of images showing the mixer being used in various settings like vocal concerts, performances, bands, and studios.

Figure 7.1: Versatile applications of the GAX-802D mixer.

8. Maintenance

  • Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the mixer. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish and internal components.
  • Ventilation: Regularly check that the cooling fan and radiating holes on the rear panel are free from dust and obstructions to ensure proper airflow and prevent overheating.
  • Storage: When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Cover the unit to protect it from dust.
  • Cable Care: Avoid bending or crimping cables excessively. Store cables neatly to prevent damage.

9. Troubleshooting

ProblemPossible CauseSolution
No sound output
  • Power not connected or switched on.
  • Volume faders (channel, main, headphone) are down.
  • Incorrect input/output connections.
  • Speakers not connected or powered.
  • Check power cable and switch.
  • Increase relevant faders and knobs.
  • Verify all audio cables are correctly connected.
  • Ensure speakers are connected and powered on.
Distorted sound
  • Input gain (TRIM) too high.
  • Main output level too high.
  • Damaged audio cables.
  • Reduce TRIM levels on input channels.
  • Lower the main output faders.
  • Replace suspected faulty cables.
Microphone not working
  • Microphone not connected properly.
  • +48V Phantom Power not activated (for condenser mics).
  • Faulty microphone or cable.
  • Check microphone connection.
  • Activate +48V Phantom Power switch.
  • Test with a different microphone or cable.
USB/SD playback issues
  • Media not inserted correctly.
  • Incompatible file format.
  • Corrupted media.
  • Re-insert USB drive/SD card.
  • Ensure files are in a supported format (e.g., MP3).
  • Try a different USB drive/SD card.

10. Specifications

FeatureDetail
ModelGAX-802D
BrandRecordio
TypeMixer, Amplifier
Channels8 (Mono microphone, Stereo line)
Power SourceAC&DC
Output Power250W x 2 (4Ω)
Phantom Power+48V
Digital Effects16 DSP presets
Equalizer3-Band (Mono channels), 5-Band Graphic (Main mix)
S/N Ratio>105dB
THD<0.01%
Frequency Response20Hz-18Hz
Media PlaybackUSB, SD, MMC Card, Bluetooth
MaterialMetal
ColorBlack
Package Dimensions49 cm (L) x 42 cm (W) x 23 cm (H)
Gross Weight8.1 kg
Diagram showing the dimensions of the mixer: 41.5cm length, 31.7cm width, 11cm height.

Figure 10.1: Mixer Dimensions.

11. User Tips

  • Direct Speaker Connection: The GAX-802D features a built-in amplifier with 250W x 2 (4Ω) output power. This means you can connect passive speakers directly to the mixer's SPEAKER OUTPUTs without needing an additional external amplifier.
  • Versatile Inputs: This mixer is well-suited for both microphones and musical instruments. Use the XLR inputs for microphones and the 1/4" LINE inputs for instruments like keyboards or guitars (ensure guitars have a preamp or DI box for optimal signal).
  • Phantom Power Usage: Remember to only activate the +48V Phantom Power when using condenser microphones that require it. Ensure the microphone is connected before switching on phantom power to prevent potential damage.

12. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.