1. Introduction
The ANDELI HD-250L Welding Seam Cleaner is a specialized torch designed for efficient cleaning of welding seams, particularly for use with TIG welding machines. This manual provides essential information for the safe and effective setup, operation, and maintenance of your HD-250L cleaning torch.

Figure 1: ANDELI HD-250L Welding Seam Cleaner
2. Package Contents
Upon unpacking, please verify that all the following components are present:
- HD-250L Cleaning Torch (4m cable length)
- Brush and Copper Clamp Head
- Shield Cup
- Cleaning Cloth

Figure 2: Included Components
3. Specifications
| Feature | Specification |
|---|---|
| Model | HD-250L |
| Type | Welding torch (Cleaning) |
| Brand | ANDELI |
| Cable Length | 4 meters |
| Certification | CE |
| Origin | Mainland China |
| Approx. Package Weight | 1.5 kg |
| Approx. Package Dimensions | 25cm x 25cm x 30cm |
4. Setup Instructions
Follow these steps to properly set up your HD-250L cleaning torch:
- Inspect Components: Before connecting, ensure all parts of the cleaning torch are free from damage.
- Connect to Welding Machine: Securely attach the electrical connectors of the HD-250L torch to the corresponding ports on your compatible TIG welding machine. The torch typically features a 2-pin connector and a brass plug for power and control signals.

Figure 3: Torch Electrical Connectors
- Attach Brush and Shield Cup: Install the cleaning brush and shield cup onto the torch head. Ensure they are firmly seated.
- Secure Trigger: The torch features a trigger mechanism for activation. Ensure it is easily accessible and functions smoothly.

Figure 4: Torch Trigger Mechanism
- Prepare Cleaning Solution: Ensure your welding machine is supplied with the appropriate cleaning solution as per its instructions.
5. Operating Instructions
Always wear appropriate personal protective equipment (PPE) including welding gloves, eye protection, and protective clothing when operating welding or cleaning equipment.
- Power On: Turn on your TIG welding machine and ensure it is set to the appropriate cleaning mode or settings as recommended by the machine's manufacturer.
- Grip the Torch: Hold the torch firmly and comfortably.

Figure 5: Proper Torch Grip
- Apply to Seam: Position the cleaning brush directly over the welding seam you wish to clean.
- Activate Cleaning: Press the trigger on the torch handle to activate the cleaning process. The cleaning solution will be dispensed, and the brush will work to remove discoloration and impurities from the weld.
- Observe Results: Move the torch steadily along the seam. Observe the cleaning effect. The goal is to achieve a clean, bright weld seam.

Figure 6: Cleaning Effect Display (Before, During, After)
- Deactivate: Release the trigger to stop the cleaning process.
- Power Off: Once cleaning is complete, turn off the welding machine and disconnect the torch.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your HD-250L cleaning torch.
- Clean the Brush: After each use, clean the brush head to remove any residue. Replace the brush when bristles become worn or damaged.

Figure 7: Cleaning Brush Head
- Inspect Cables and Connections: Periodically check the cables and connectors for any signs of wear, cuts, or loose connections. Replace damaged parts immediately.
- Clean Torch Body: Wipe down the torch body with a clean, dry cloth to remove any dust or debris.
- Proper Storage: Store the cleaning torch in a dry, clean environment, away from direct sunlight and extreme temperatures. Coil the cable neatly to prevent kinks or damage.
7. Troubleshooting
If you encounter issues with your HD-250L cleaning torch, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No cleaning action | Torch not properly connected to welding machine. Welding machine not powered on or in incorrect mode. Cleaning solution reservoir empty. | Ensure all connections are secure. Verify welding machine power and settings. Refill cleaning solution. |
| Poor cleaning results | Worn or dirty brush head. Incorrect cleaning solution. Improper technique (too fast/slow, insufficient contact). | Replace brush head. Use recommended cleaning solution. Adjust cleaning speed and pressure. |
| Torch feels loose or unstable | Loose shield cup or brush head. | Tighten or re-seat the shield cup and brush head. |
8. User Tips
- Check Compatibility: Always verify that the HD-250L cleaning torch is compatible with your specific TIG welding machine model before use. Refer to your welding machine's manual or contact the manufacturer if unsure.
- Test on Scrap Material: Before cleaning a critical weld, practice on a piece of scrap material to optimize your technique and ensure desired cleaning results.
- Use Quality Cleaning Solution: The effectiveness of the cleaning process heavily relies on the quality and type of cleaning solution used. Always follow the recommendations for your welding machine.
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller directly. Keep your purchase receipt as proof of purchase.
Seller: Shop911110234 Store