1. Introduction
The ANDELI CT-520DPL is an intelligent, multi-function welding machine designed for versatility and performance. This 5-in-1 unit integrates TIG, COLD, CUT, MMA, and Pulse welding capabilities, making it suitable for a wide range of applications from professional workshops to home projects. Featuring a 220V input, built-in oil-water separator, and gas regulator, the CT-520DPL offers precise control and efficient operation.
Video: Overview of the ANDELI CT-520DPL Multi-function Welding Machine.

Image: The ANDELI CT-520DPL, highlighting its 5-in-1 capabilities: TIG, COLD, CUT, MMA, and Pulse.
2. Safety Information
Always prioritize safety when operating welding and cutting equipment. Failure to follow safety precautions can result in serious injury or death.
- Eye and Face Protection: Always wear a welding helmet with appropriate shade lenses to protect against arc flash and sparks.
- Body Protection: Wear flame-resistant clothing, gloves, and safety shoes.
- Ventilation: Ensure adequate ventilation to remove welding fumes and gases from the work area.
- Fire Prevention: Keep a fire extinguisher nearby. Remove flammable materials from the work area.
- Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before use.
- Gas Cylinders: Secure gas cylinders properly. Use appropriate regulators and hoses.
- Read the Manual: Familiarize yourself with all functions and safety warnings in this manual before operation.
3. Package Contents
The standard package for the CT-520DPL includes the following items:

Image: Visual representation of the included accessories with the CT-520DPL.
- Ground Clamp (2M)
- WP-17F Torch (4M)
- SG-55 Plasma Cutting Torch (4M)
- Hose Clamp (x2)
- Hose Barb (x2)
- Pyrex Cup Kit
- Electrode (x10)
- Tip (x10)
- Gas Pipe (3M)
- Welding Wire (3M)
- Gloves
- MMA Holder
- Welding Rod (x5)
- WP-9F Torch (4M)
- Collet (x10)
- Nozzle (x10)
- Tungsten Electrode (x10)
- Stainless Steel Wire
4. Product Overview
4.1 Front Panel

Image: Front view of the CT-520DPL, showing the control panel and connection points.

Image: Detailed view of the control panel with numbered labels for each function.
- Function Indicator: Displays the currently selected welding/cutting mode.
- Function Selector: Button to cycle through TIG, COLD, CUT, MMA, and Pulse modes.
- Display: Digital display for current settings and parameters.
- Auto-storage: Memory function to save preferred settings.
- Parameter Indicator: Shows which parameter is currently being adjusted (e.g., current, frequency, time).
- Parameter Adjust Knob: Rotary knob to increase or decrease selected parameter values.
- Parameter Selector: Button to cycle through adjustable parameters within a selected mode.
- Gas Pressure Regulator: Gauge to monitor and adjust gas pressure.
Connection Points:
- Gas-power Connector: For connecting the TIG torch gas and power.
- Control Cable Connector: For connecting the TIG/Plasma torch control cable.
- Negative Pole (-): Output terminal for negative connection.
- Positive Pole (+): Output terminal for positive connection.
4.2 Rear Panel

Image: Rear view of the CT-520DPL, showing power and gas connections.
- Power Switch: Main power on/off switch.
- Input Power Cable: Connection for 220V AC power supply.
- Gas Pressure Adjust Knob: Knob to fine-tune the gas pressure.
- Gas Inlet: Connection point for the shielding gas supply.
4.3 Internal Components

Image: Internal view highlighting the M12 Pneumatic Fittings, Built-in Oil-water Separator, and Gas Pressure Regulator.
- M12 Pneumatic Fittings: For secure gas line connections.
- Built-in Oil-water Separator: Ensures clean, dry gas delivery for optimal welding/cutting performance.
- Gas Pressure Regulator: Internal component for precise gas flow control.
5. Setup
Before operating the CT-520DPL, ensure all connections are secure and the work area is prepared according to safety guidelines.
- Power Connection: Connect the input power cable to a suitable 220V AC power supply. Ensure the power switch on the rear panel is in the 'OFF' position before connecting.
- Gas Connection: Connect your shielding gas cylinder (e.g., Argon for TIG, compressed air for CUT) to the Gas Inlet on the rear panel using the provided gas pipe and hose barb. Adjust the gas pressure using the Gas Pressure Adjust Knob on the rear panel and monitor with the front panel gauge. The built-in oil-water separator will ensure clean gas delivery.
- Torch and Ground Clamp Connection:
- TIG Welding: Connect the TIG torch (WP-17F or WP-9F) to the Gas-power Connector and the Control Cable Connector on the front panel. Connect the ground clamp to the Negative Pole (-) terminal and secure it to the workpiece.
- MMA Welding: Connect the MMA holder to the Positive Pole (+) terminal and the ground clamp to the Negative Pole (-) terminal.
- Plasma Cutting (CUT): Connect the SG-55 Plasma Cutting Torch to the appropriate connectors (usually the gas-power and control cable connectors, refer to specific torch instructions if different). Connect the ground clamp to the workpiece.
- Accessory Installation: Install appropriate consumables (tungsten electrodes, cutting tips, welding rods) into their respective torches/holders.
- Initial Check: Double-check all connections, ensure gas flow is correct, and verify the power supply.
6. Operating Instructions
The CT-520DPL offers five distinct operating modes. Use the Function Selector button (2) on the front panel to switch between modes and the Parameter Selector button (7) to choose parameters for adjustment with the Parameter Adjust Knob (6).
6.1 TIG Welding (Tungsten Inert Gas)

Image: TIG welding mode overview, showing 2T/4T options and example welds.
- Recommended Material Thickness: 0.8MM-10MM.
- Features: Per-flow & Post-flow settings for gas saving. 2T/4T trigger modes available.
- Operation: Select TIG mode. Adjust welding current, Per-flow time, Post-flow time, Start current, Rise time, Peak current, Pulse frequency, Base current, Down time, and Crater current as needed using the Parameter Selector and Adjust Knob.
6.2 COLD Welding

Image: COLD welding mode overview, showing benefits like no deformation or discoloration.
- Features: Designed for minimal deformation or discoloration, eliminating the need for extensive post-weld polishing.
- Operation: Select COLD mode. Adjust Cold Welding Time (MS) and Cold Welding Interval (Hz) to achieve desired results.
6.3 CUT (Plasma Cutting)

Image: CUT plasma cutting mode overview, showing thickness selection and cutting examples.
- Built-in Thickness Selection: 1.0 / 3.0 / 5.0 / 8.0mm.
- Cutting Capacity: Fast cutting for thickness below 10mm plates. Limit cutting for thickness 10-15mm plates.
- Max Current: 50A. 2T/4T trigger modes available.
- Operation: Select CUT mode. Adjust cutting current and select appropriate thickness setting. Ensure adequate air pressure for plasma cutting.
6.4 MMA Welding (Manual Metal Arc)

Image: MMA welding mode overview, showing electrode selection and features like Hot Start.
- Built-in Electrode Selection: 2.0 / 2.5 / 3.2 / 4.0mm.
- Features: One-click welding and manual current setting. Supports lasting welding. Includes HOT START, ARC FORCE, and ANTI-STICK functions for improved arc stability and ease of use.
- Operation: Select MMA mode. Choose electrode size and adjust welding current.
6.5 PULSE Welding
The CT-520DPL supports Pulse welding, which can be applied in TIG and COLD modes for enhanced control over heat input and bead appearance, especially on thin materials or when welding out of position.
- Operation: When in TIG or COLD mode, select the Pulse parameter using the Parameter Selector. Adjust Pulse Frequency and Base Current as required.
7. Specifications

Image: Detailed technical specifications for the CT-520DPL across all functions.
| Function | TIG | COLD | CUT | MMA |
|---|---|---|---|---|
| Rated Input Voltage(V) | AC 220±15% | |||
| Frequency(Hz) | 50/60HZ | |||
| Efficiency(%) | 80% | |||
| Power Factor | 0.75 | |||
| Rated Power(KW) | 5.7 | 5.7 | 8.1 | 9.2 |
| Rated Input Current(A) | 26 | 26 | 37 | 42 |
| Welding Current Range(A) | 5-200 | 10-200 | 20-50 | 10-200 |
| Output Voltage(V) | 10.2-18 | 10.2-18 | 88-100 | 20.4-28 |
| Load Voltage(V) | 10.2-18 | 10.2-18 | 88-100 | 20.4-28 |
| No-Load Voltage(V) | 64 | 64 | 255 | 64 |
| Rated Duty Cycle (% 40℃ 10min) | 40% (200A) | 40% (200A) | 40% (50A) | 40% (200A) |
| 60% (163A) | 60% (163A) | 60% (41A) | 60% (163A) | |
| 100% (126A) | 100% (126A) | 100% (32A) | 100% (126A) | |
| Cold Welding Time(MS) | / | 1-200 | / | / |
| Cold Welding Interval(Hz) | / | 0-10 | / | / |
| Per-Flow Time(S) | 0-1 | / | / | / |
| Start current(A) | 5-200 | / | / | / |
| Rise Time(S) | 0-5 | / | / | / |
| Peak Current(A) | 200 | / | / | / |
| Pulse Frequency(Hz) | 0.5-100 | / | / | / |
| Base Current(A) | 5-200 | / | / | / |
| Down Time(S) | 0-5 | / | / | / |
| Crater Current(A) | 5-200 | / | / | / |
| Post-Flow Time(S) | 0-10 | 0-10 | / | / |
| Hot-Start Current(A) | / | / | / | / |
| Hot-Start Time(S) | / | / | / | / |
| Welding Thickness | 0.8-12 | / | 1-15 | 2-12 |
| Protection Class | IP21S | |||
| Insulation Class | H | |||
| Cooling | FAN | |||
| Dimension(MM) | 430×172×250 | |||
| Net Weight(KG) | 10.7 | |||

Image: Visual representation of the CT-520DPL's dimensions (430mm x 172mm x 250mm) and weight (10.7KG).
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup, which can hinder cooling. Use compressed air to gently clear internal components if accessible and safe to do so.
- Cable Inspection: Regularly inspect all welding cables, power cords, and gas hoses for cuts, abrasions, or loose connections. Replace damaged components immediately.
- Consumables: Check and replace worn-out consumables such as TIG tungsten electrodes, plasma cutting tips, and nozzles.
- Gas System: Ensure gas lines are free from leaks. The built-in oil-water separator should be checked and drained if necessary to maintain clean gas flow.
- Storage: Store the machine in a dry, clean environment away from extreme temperatures and humidity when not in use.
9. Troubleshooting
If you encounter issues with your CT-520DPL, perform basic checks before seeking professional assistance.
- No Power: Check the power cable connection, wall outlet, and main power switch on the machine's rear panel. Ensure the circuit breaker has not tripped.
- No Arc/Poor Arc: Verify all welding cable connections (torch, ground clamp). Check consumables for wear or incorrect installation. Ensure proper gas flow and pressure for TIG/CUT modes. For MMA, check electrode type and dryness.
- Overheating: Ensure the machine's ventilation openings are clear and not obstructed. Allow the machine to cool down if the thermal overload indicator activates. Reduce duty cycle or welding current if consistently overheating.
- Gas Flow Issues: Check gas cylinder level, regulator settings, and hose connections. Ensure the oil-water separator is not clogged or full.
- Error Codes: If the digital display shows an error code, consult the full product manual (if available) or contact technical support for specific interpretations.
10. User Tips
- Aluminum Welding: The TIG function of the CT-520DPL is capable of welding aluminum. For optimal results, ensure you use AC TIG settings, pure argon shielding gas, and appropriate tungsten electrodes (e.g., green-tipped pure tungsten or gray-tipped ceriated tungsten). Adjust the AC balance and frequency for better cleaning action and arc focus.
- Cold Welding for Thin Materials: Utilize the COLD welding mode for very thin materials or applications where heat distortion and discoloration must be minimized. Experiment with the Cold Welding Time and Interval settings to find the sweet spot for your specific material.
- Plasma Cutting Precision: For precise plasma cuts, ensure your plasma torch consumables (tip, electrode, shield cup) are in good condition. Maintain a consistent standoff distance from the workpiece.
- Parameter Storage: Use the 'Storage' (M) function on the control panel to save frequently used settings for different materials or processes, allowing for quick recall and improved workflow efficiency.
11. Warranty and Support

Image: Information regarding ANDELI's quality services, including warranty and technical support.
ANDELI offers a Two-Year Warranty for the CT-520DPL welding machine. Additionally, customers are provided with Free Lifetime Technical Support. For any inquiries or assistance, please contact ANDELI customer service.