1. Introduction
Thank you for choosing the ANDELI MIG-250 Multifunctional Inverter Welder. This machine is designed for versatility, offering MIG (Gasless Flux Core), Lift TIG, and MMA (Stick) welding capabilities. Its compact design and advanced inverter technology make it suitable for various welding tasks. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting.

Figure 1: ANDELI MIG-250 3-in-1 Inverter Welder
2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Electric Shock: Welding current can cause fatal electric shock. Ensure proper grounding, wear dry gloves, and insulate yourself from the workpiece and ground.
- Fumes and Gases: Welding produces fumes and gases that can be hazardous to your health. Work in a well-ventilated area or use a fume extractor.
- Arc Rays: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade, safety glasses, and protective clothing.
- Fire and Explosion: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Hot Parts: Welded parts and equipment can be extremely hot. Allow them to cool before handling or wear appropriate heat-resistant gloves.
- Personal Protective Equipment (PPE): Always wear a welding helmet, safety glasses, welding gloves, protective clothing, and safety shoes.
3. Package Contents
Verify that all items are present in your package:

Figure 2: Included Accessories
- ANDELI MIG-250 (220V) Welder
- MIG Torch
- Ground Clamp
- MMA Holder
- Flux-cored Wire (0.5kg)
4. Product Overview
The MIG-250 features a compact design and an intuitive LED display for easy operation.

Figure 3: Welder Dimensions and Weight
Front Panel Controls:

Figure 4: Easy-to-Operate Control Panel
- Function Area: Displays selected welding mode (0.8mm MIG, 1.0mm MIG, MMA, Lift TIG).
- Warning Prompt: Indicates overcurrent or overheat conditions.
- Cutting Plate Thickness Display: Shows recommended plate thickness in mm.
- Select Button: Used to cycle through welding modes.
- Knob: Multifunctional knob for adjusting current, voltage, and wire speed.
5. Setup
Before operating the welder, ensure proper setup and connections.
- Power Connection: Connect the welder to a 220V power supply.
- Ground Clamp Connection: Securely attach the ground clamp to the workpiece or welding table. Ensure good electrical contact.
- MIG Welding Setup (Flux-cored):
- Open the wire feed compartment.
- Install the 0.5kg flux-cored wire spool. This machine is capable of using Φ0.8 / Φ1.0mm wire.
- Thread the wire through the feeder mechanism and into the MIG torch liner.
- Connect the MIG torch to the designated port on the front panel.

Figure 5: Flux-Cored Wire Installation
- MMA Welding Setup:
- Connect the MMA holder to the positive (+) terminal and the ground clamp to the negative (-) terminal on the front panel.
- Insert the appropriate electrode into the MMA holder.
- Lift TIG Welding Setup:
- Connect the TIG torch to the designated port.
- Note: This model features Lift TIG, which typically operates without external shielding gas or requires a separate gas setup not integrated into the machine itself. There is no direct gas connection port on the welder for TIG.
6. Operating Instructions
Ensure all safety precautions are followed before beginning operation.

Figure 6: Multifunctional Welding
- Power On: Turn on the main power switch. The LED display will illuminate.
- Select Welding Mode: Use the 'Select Button' (4) to cycle through the available welding modes (MIG 0.8mm, MIG 1.0mm, MMA, Lift TIG). The selected mode will be displayed in the 'Function Area' (1).
- Adjust Parameters (Synergy Knob):

Figure 7: Synergy Knob for Automatic Matching
- The MIG-250 features a synergy knob (5) for automatic matching of current and voltage.
- Fine-tune the knob according to the thickness of the welding plate. The display will show the recommended cutting plate thickness (3).
- For MIG mode, adjusting the knob will automatically match current, voltage, and wire speed.
- For MMA and Lift TIG, the knob primarily adjusts the welding current.
- MIG Welding (Flux-cored):
- Select the appropriate MIG wire diameter (0.8mm or 1.0mm) using the select button.
- Adjust the synergy knob based on material thickness.
- Begin welding. This mode does not require external shielding gas.
- MMA Welding:

Figure 8: MMA Welding
- Select MMA mode.
- Adjust the current using the knob.
- Strike the arc with the electrode and maintain a consistent arc length. This mode is suitable for welding up to 5mm thickness with a 2.5 electrode.
- Lift TIG Welding:

Figure 9: Lift TIG Welding Process
- Select Lift TIG mode.
- Adjust the current using the knob.
- To start the arc, touch the TIG electrode to the workpiece and then lift it off. The arc will ignite. Welding is not controlled by a torch switch in this mode.
Welding Effects:

Figure 10: Welding Results on Various Materials

Figure 11: Welding Applications
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welder.
- Cleaning: Periodically clean the internal components of the welder using compressed air to remove dust and debris. Ensure the machine is unplugged before cleaning.
- Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for damage, cuts, or loose connections. Replace damaged parts immediately.
- Wire Feeder: Keep the wire feeder mechanism clean and free of obstructions. Check the wire feed rollers for wear.
- Storage: Store the welder in a dry, clean environment, away from excessive dust, moisture, and corrosive materials.
8. Troubleshooting
Refer to the following common issues and solutions:
- No Power: Check the power cord connection, main power switch, and circuit breaker.
- No Arc: Ensure the ground clamp has good contact with the workpiece. Check all cable connections. For MMA, ensure the electrode is properly inserted. For Lift TIG, ensure proper touch-and-lift technique.
- Poor Weld Quality: Adjust welding parameters (current, voltage, wire speed) according to material thickness. Ensure the workpiece is clean. Check for proper wire feed.
- Overcurrent/Overheat Warning (Warning Prompt 2): If the overcurrent or overheat indicator lights up, the machine has exceeded its duty cycle or is experiencing an internal fault. Stop welding and allow the machine to cool down. If the issue persists after cooling, contact support.
- Gas Connection for TIG: This model is designed for Lift TIG, which typically does not require external shielding gas or uses a separate gas supply system. There is no integrated gas connection on the machine for TIG.
9. Specifications
Technical specifications for the ANDELI MIG-250 Welder:

Figure 12: Detailed Technical Specifications
| Parameter | MIG (AC110V+15%) | MMA (AC110V+15%) | MIG (AC220V+15%) | MMA (AC220V+15%) |
|---|---|---|---|---|
| Power Supply Voltage(V) | 220V (or 110V depending on model/input) | |||
| Frequency(Hz) | 50/60 | |||
| Rated Input Capacity(KVA) | 3.3 | 4.1 | 4.1 | 5.1 |
| Rated Input Current(I1max) | 29.6 | 37.4 | 18.7 | 23.2 |
| Rated Input Current(I1eff) | 16.2 | 20.4 | 11.8 | 12.6 |
| Output Current Range(A) | 40-100 | 20-100 | 40-120 | 20-120 |
| Temporary load rate | 30 | 30 | 30 | 30 |
| Efficiency(%) | 62 | |||
| Power Factor | 0.73 | |||
| IP | IP21S | |||
| Insulation Class | F | |||
| Cooling Way | FAN | |||
| Machine Dimension(mm) | 320*145*190 | |||
| Electrode Diameter(mm) | 0.8-1.0 | 2.5 / 3.2 | 0.8-1.0 | 2.5 / 3.2 |
| Electrode Type | - | J422/502/507 | - | J422/502/507 |
| Net Weight(Kgs) | 4.0 | |||
10. User Tips
- Synergy Knob: The left knob (Synergy Knob) should generally be in the middle position for automatic adjustment. During operation, it automatically adjusts current, voltage, and wire speed. The display does not show voltage directly.
- Flux-Cored Wire: This machine is designed to work effectively with flux-cored wire, eliminating the need for an external gas cylinder for MIG welding.
- MMA Welding: The machine is fully capable of welding with electrodes.
- Wire Spool Size: The internal compartment is designed for smaller wire spools, typically 0.5kg. A 5kg spool will not fit.
- Aluminum Welding: This machine can be used to weld aluminum. Ensure you use appropriate wire and settings for aluminum.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.