AK Hanhope Ignition Coil Wiring Harness Cable Connector Plug

Contents

AK Hanhope Ignition Coil Wiring Harness Cable Connector Plug User Manual

For Renault Clio, Megane, Laguna, Espace 1.4 1.6 1.8 2.0 16V Engines

1. Product Overview

This manual provides instructions for the AK Hanhope Ignition Coil Wiring Harness Cable Connector Plug. This component is designed to replace or repair the wiring harness connecting the ignition coils to the vehicle's electrical system in compatible Renault models. It ensures proper electrical connection for optimal engine performance.

Multiple AK Hanhope Ignition Coil Wiring Harness Connectors

Figure 1: Multiple AK Hanhope Ignition Coil Wiring Harness Connectors

Close-up of a single AK Hanhope Ignition Coil Wiring Harness Connector

Figure 2: Close-up of a single AK Hanhope Ignition Coil Wiring Harness Connector

2. Specifications

AttributeDetail
Brand NameAK Hanhope
OEM Part Numbers7700113357, 8200035420, 8200154186, 8200208611, 8200380267, 8200405098, 8200568671, 8200672564, 8200765882
Interchange Part Number4408389 22448-00QAA
Manufacturer Part Number4408389 22448-00QAA
Other Part Number4408389 22448-00QAA
OriginMainland China
Country/Region of Car ManufactureChina
High-concerned chemicalNone
Package Dimensions (L x W x H)22 cm x 25 cm x 10 cm
Package Weight0.2 kg

2.1 Compatible Vehicle Models

  • Renault Avantime
  • Renault Clio II - III
  • Renault Espace III - IV
  • Renault Fluence
  • Renault Kangoo
  • Renault Laguna
  • Renault Megane
  • Renault Scenic
  • Renault Thalia
  • Renault Twingo
  • Renault Trafic

2.2 Compatible Engine Types

  • 1.4L 16V
  • 1.6L 16V
  • 1.8L 16V
  • 2.0L 16V

3. Setup and Installation

Important Safety Notice: Installation of automotive electrical components can be complex and may require specialized tools and knowledge. Incorrect installation can lead to vehicle damage or personal injury. It is highly recommended that installation be performed by a qualified automotive technician.

3.1 Pre-Installation Checks

  1. Ensure the vehicle's ignition is off and the battery's negative terminal is disconnected to prevent electrical shorts.
  2. Verify that the new wiring harness matches the original part and is compatible with your vehicle's make, model, and engine type using the OEM part numbers and fitment list provided in Section 2.
  3. Inspect the new harness for any visible damage, such as frayed wires or cracked connectors.

3.2 Installation Steps (General Guidelines)

  1. Locate the Ignition Coils: Identify the position of the ignition coils and their existing wiring harnesses in your engine bay.
  2. Disconnect Old Harness: Carefully disconnect the old wiring harness from the ignition coils and the main engine wiring loom. Note the routing of the wires for reinstallation.
  3. Remove Old Harness: Detach any clips or fasteners securing the old harness and remove it from the vehicle.
  4. Install New Harness: Route the new AK Hanhope wiring harness in the same manner as the old one. Secure it with appropriate clips or fasteners to prevent chafing or interference with moving parts.
  5. Connect New Harness: Connect the new harness to the ignition coils and the vehicle's main wiring loom. Ensure all connections are secure and fully seated.
  6. Reconnect Battery: Once all connections are made and secured, reconnect the negative terminal of the vehicle's battery.
  7. Test System: Start the vehicle and check for any warning lights or signs of misfire. If issues persist, refer to the Troubleshooting section.

4. Operating Principles

The ignition coil wiring harness is a passive electrical component that serves as a conduit for electrical signals and power to the ignition coils. Its primary function is to ensure a stable and reliable connection, allowing the Engine Control Unit (ECU) to accurately control the ignition timing and spark delivery to the engine's cylinders. A properly functioning harness is crucial for efficient combustion and overall engine performance.

5. Maintenance

The ignition coil wiring harness typically requires minimal maintenance. However, periodic inspection can help prevent potential issues:

  • Visual Inspection: Annually or during routine engine maintenance, visually inspect the harness for signs of wear, cracking, fraying, or heat damage.
  • Connection Integrity: Check that all connectors are securely seated and free from corrosion. If corrosion is present, carefully clean the terminals with an appropriate electrical contact cleaner.
  • Routing: Ensure the harness remains properly routed and secured, away from hot engine components or moving parts that could cause damage.

6. Troubleshooting

If you experience issues after installing or while using the ignition coil wiring harness, consider the following:

  • Engine Misfire/Rough Idling: This could indicate a poor connection or a faulty harness. Re-check all connections to the ignition coils and the main loom. Ensure the harness is fully seated.
  • Check Engine Light (CEL): If the CEL illuminates with codes related to ignition coil circuits (e.g., P0351-P0358 for coil primary/secondary circuit malfunction), inspect the harness for continuity and proper connection.
  • No Start Condition: If the engine cranks but does not start, and ignition system issues are suspected, verify that the harness is delivering power and signal to the coils.
  • Visible Damage: If any part of the harness shows signs of melting, burning, or physical damage, it should be replaced immediately.

For persistent issues, consult a professional automotive technician for diagnosis and repair.

7. Warranty and Support

7.1 Product Warranty

This AK Hanhope Ignition Coil Wiring Harness Cable Connector Plug comes with a 2-year guarantee from the date of purchase. This warranty covers manufacturing defects and material failures under normal use. It does not cover damage resulting from improper installation, misuse, accident, or unauthorized modifications.

7.2 Customer Support

For technical assistance, warranty claims, or any questions regarding the product, please contact the seller or manufacturer directly. Provide your purchase details and a clear description of the issue for efficient support.

8. User Tips

  • Always use appropriate automotive-grade tools when working on your vehicle's electrical system.
  • When disconnecting electrical connectors, gently press the release tab (if present) before pulling to avoid damaging the connector or wires.
  • Consider applying dielectric grease to the connector pins before assembly to help prevent corrosion and ensure a good electrical connection, especially in humid environments.
  • After installation, clear any stored diagnostic trouble codes (DTCs) from the vehicle's ECU using an OBD-II scanner.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.