1. Introduction and Overview
Thank you for choosing the SUNSUN 4-in-1 Submersible Aquarium Filter. This versatile device combines filtration, water pumping, air pumping (oxygenation), and wave-making functions to create a healthy and dynamic environment for your aquatic life. Designed for ease of use and efficient performance, this manual will guide you through the proper setup, operation, and maintenance of your new filter.
Image: The filter showcasing its efficient aerobic function with adjustable air volume.
2. Safety Information
- Ensure the pump is completely submerged in water during operation. Running the pump dry will cause it to overheat and burn out, leading to permanent damage.
- Always disconnect the power supply before performing any maintenance, cleaning, or assembly tasks.
- This product is designed for indoor use in aquariums only. Do not use it for any other purpose.
- Keep out of reach of children.
- Regularly inspect the power cord for any damage. Do not use if the cord is frayed or damaged.
- The product operates on 220-240V, 50HZ. Ensure your power supply matches these requirements.
3. Package Contents
Your SUNSUN filter package typically includes the following components:
- Filter pump head (motor unit)
- Filter box sections (quantity varies by model)
- Biochemical cotton filter media (pre-installed or separate)
- Oxygen tube with intake valve
- Rain shower bar (may vary by model)
- Suction cups for mounting
- Various interface components/connectors
Image: Exploded view showing the filter's internal and external components, including the rotor, activated carbon, rain shower, and oxygen tube.
4. Product Features
- Multi-function: Acts as a submersible filter, water pump, air pump (oxygenator), and wave maker.
- Efficient Filtration: Utilizes biochemical cotton and allows for additional filter materials (purchased separately) for multi-layer filtration.
- Adjustable Oxygenation: Features an oxygen increase port with adjustable air volume.
- Natural Rain Effect: Some models include a rain shower bar to improve water quality and oxygen content through surface agitation.
- Silent Operation: Designed with a glue-filled sealed body and high-quality rotor for low noise.
- Durable Motor: Equipped with a high-quality permanent magnet rotor and ceramic shaft (for 16W/25W models) or stainless steel shaft (for 6W/8W models) for long service life in fresh and saltwater.
- Easy Installation: Non-slip suction cups provide secure attachment to the aquarium wall.
5. Setup Instructions
- Assemble Filter Box: Connect the filter box sections together. Ensure the biochemical cotton is properly placed inside. For models like JQP-500F, which have a 2-section filter box, ensure it's securely assembled.
- Attach Pump Head: Securely attach the pump head (motor unit) to the top of the assembled filter box.
- Install Oxygen Tube (if desired):
- Connect the oxygen tube to the aerobic mouth on the pump head.
- Refer to the diagram: Rotate the oxygen increase port assembly in the direction of the arrow to increase oxygen.
- The intake valve at the end of the oxygen tube needs to be placed outside the fish tank, in contact with the air. It can be rotated to adjust the air intake volume.
Image: Step-by-step guide for adjusting the oxygen increase port.
Image: Guide for positioning and adjusting the external intake valve.
- Install Rain Shower Bar (if desired): Attach the rain shower bar to the outlet of the pump head. Ensure it is securely fitted. Note: The effects of rain and increased oxygen cannot be used at the same time if they utilize the same output port.
- Mount in Aquarium: Attach the non-slip suction cups to the filter body. Submerge the entire filter unit into the aquarium water, ensuring it is fully underwater. Press the suction cups firmly against the inner glass wall to secure the filter.
- Positioning: The filter can be placed at various angles. For low-water fish tanks, ensure the water level is above the filter's intake.
6. Operating Instructions
- After successful installation and ensuring the filter is fully submerged, connect the power plug to a suitable electrical outlet (220-240V, 50HZ).
- The filter will immediately begin operating, performing water circulation, filtration, and either oxygenation (if the oxygen tube is installed and adjusted) or a rain effect (if the rain bar is installed).
- Adjusting Oxygen: If using the oxygen tube, rotate the external intake valve to control the amount of air drawn into the system, thereby adjusting the bubble volume.
- Choosing Function: If your model supports both rain and oxygenation, you typically choose one by connecting the appropriate accessory to the outlet.
Image: Filter in operation, quickly increasing oxygen with adjustable air volume.
Image: Filter creating a natural rain effect to enhance water quality and oxygen.
7. Maintenance
Regular maintenance is crucial for the longevity and efficient operation of your filter.
- Disconnect Power: ALWAYS unplug the filter from the power outlet before any maintenance.
- Clean Filter Media:
- Remove the filter box sections.
- Rinse the biochemical cotton and any other filter materials (e.g., ceramic rings) with old aquarium water. Do NOT use tap water or hot water, as chlorine can kill beneficial nitrifying bacteria essential for biological filtration.
- Replace filter media as needed. Filter materials like activated carbon should be replaced periodically (e.g., monthly) as they become saturated.
Image: Removable filter box showing biochemical cotton and space for additional filter materials.
- Clean Impeller/Rotor: Periodically remove the pump head and carefully clean the impeller/rotor assembly. Debris can accumulate here, reducing performance and increasing noise.
- Clean Intake Valve: Ensure the external intake valve for the oxygen tube is clean and free from blockages to maintain proper air intake.
- Reassemble: After cleaning, reassemble all components securely and place the filter back into the aquarium, ensuring it is fully submerged before reconnecting power.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Filter not running / No water flow | No power; Impeller jammed; Air lock; Not fully submerged. | Check power connection; Clean impeller; Re-submerge filter to release air; Ensure filter is fully underwater. |
| Reduced water flow | Clogged filter media; Impeller dirty; Outlet blocked. | Clean or replace filter media; Clean impeller; Clear any blockages from the outlet. |
| Loud noise / Vibration | Impeller dirty or damaged; Air in pump; Improper installation; Damaged rotor axle. | Clean or replace impeller/rotor axle; Ensure filter is fully submerged and free of air; Re-secure suction cups; Inspect rotor axle for breaks. |
| No bubbles from air pump function | Oxygen tube blocked; Intake valve closed or blocked; Aerobic mouth blocked. | Check and clear oxygen tube; Adjust or clean intake valve; Clear aerobic mouth. |
9. Specifications
The SUNSUN 4-in-1 filter series comes in various models with different specifications. Please refer to the tables below for detailed information on CHJ-series and JQP-series models.
CHJ-Series Specifications
Image: Detailed specifications for CHJ-series models.
| Model | Voltage | Frequency | Power | H-max | Output | Cable length | Weight | Dimensions (LxWxH) |
|---|---|---|---|---|---|---|---|---|
| CHJ-502 | 220-240V | 50HZ | 7W | 0.9m | 500L/h | 1.5m | 0.3kg | 211x71x98mm |
| CHJ-602 | 220-240V | 50HZ | 8W | 1.3m | 600L/h | 1.5m | 0.44kg | 218.5x79x107.5mm |
| CHJ-902 | 220-240V | 50HZ | 20W | 1.5m | 900L/h | 1.5m | 0.6kg | 287x89x117mm |
| CHJ-1502 | 220-240V | 50HZ | 25W | 1.8m | 1500L/h | 1.5m | 0.8kg | 273x96x132mm |
JQP-Series Specifications
Image: Detailed specifications for JQP-series models.
| Model | Power | Range | Flow | Size (mm) | Filter Box | Line Length |
|---|---|---|---|---|---|---|
| JQP-500F | 5W | 0.9m | 500L/h | 65x51x215 | 2 sections | 1.5m |
| JQP-1000F | 14W | 1.4m | 1000L/h | 76x60x288 | 3 sections | 1.5m |
| JQP-1500F | 20W | 1.7m | 1500L/h | 87x68x370 | 3 sections | 1.5m |
| JQP-2500F | 35W | 2.4m | 2500L/h | 96x75x380 | 3 sections | 1.8m |
Note: JP-012F (3W, 300L/h, 0.6m lift, 1 cotton unit), JP-013F (8W, 600L/h, 1.0m lift), JP-014F (16W, 800L/h, 1.4m lift) are also available models with similar features.
Image: Dimensions and specifications for JP-012F model.
Image: Filter demonstrating various placement angles, suitable for low-water fish tanks, with oxygenation options.
10. User Tips
- Aquarium Size Matching: For a 110-liter aquarium, consider models like the CHJ-602 (600L/h output) or JQP-1000F (1000L/h flow) to ensure adequate filtration and circulation. Always aim for a filter that can process your tank's volume several times per hour.
- Noise Reduction: If the filter becomes noisy, first check for proper submersion and ensure no air is trapped. Then, clean the impeller and its housing thoroughly. A damaged rotor axle can also cause noise and may require replacement.
- Rotor Axle Durability: Some users have reported issues with plastic rotor axles. If your model has a plastic axle and you experience breakage, consider sourcing a replacement part if available, or contact support.
- Filter Media: While biochemical cotton is included, consider adding other filter materials like ceramic rings for enhanced biological filtration, especially for larger or more heavily stocked tanks. Remember to purchase these separately.
11. Warranty and Support
For warranty information, technical support, or to inquire about replacement parts (such as a turbine shaft for the JQP-2500F or other models), please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.