1. Introduction
The Retevis EEK013 is a Bluetooth-compatible earpiece and wireless PTT (Push-To-Talk) system designed for use with two-way radios and mobile phones. It features an advanced Qualcomm chip for lower delay and CVC (Clear Voice Capture) technology, ensuring high-fidelity sound quality. The system offers flexible operation and is suitable for various environments, including security, hospitality, and driving.

Figure 1: Retevis EEK013 Bluetooth Earpiece, Wireless Adapter, and Finger PTT.
2. Package Contents
Ensure all the following items are included in your package:
- 1 x Bluetooth-compatible Headset
- 1 x 2PIN Wireless Adapter (for Kenwood 2Pin Connector)
- 1 x Wireless PTT (Push-To-Talk) Button

Figure 2: Included components: Bluetooth Headset, Wireless Adapter, and Wireless PTT.
3. Product Overview
Familiarize yourself with the components and controls of your Retevis EEK013 system.
3.1 Bluetooth Headset

Figure 3: Bluetooth Headset with numbered controls.
- Volume Button (+/-)
- Power Switch
- Pilot Lamp (LED Indicator)
- Micro Charging Port
- Speaking Key
- Silent Key
- Microphone
3.2 Wireless Adapter and PTT

Figure 4: Wireless Adapter and PTT with numbered controls.
Wireless Adapter:
- Interphone Plug (for Kenwood 2pin)
- Multifunctional Buttons
- Charging Interface (DC 5V input)
- Indicator Light
Wireless PTT:
- Indicator Light
- Power Button
- Charging Interface (DC 5V input key)

Figure 5: Close-up of silicone earplugs and USB charging port.
4. Specifications
| Feature | Specification |
|---|---|
| Model | EEK013 |
| Material | Rubber Paint |
| Chip | US (Qualcomm) |
| Sound Quality | Hi-fi Quality |
| Low Battery Tips | Yes |
| English Voice Prompt | Yes |
| Dual Standby | No (Walkie-talkie OR Phone) |
4.1 Bluetooth Headset Specifications
| Feature | Specification |
|---|---|
| Support Protocol | A2DP, AVRCP, HFP (V1.2), HSP (V1.2), SSP2 |
| Net Weight | 21 grams |
| Effective Distance | 10 meters |
| Battery | Lithium ion polymer (90mAh/3.7V) |
| Max Charging Time | 60 minutes (1 hour) |
| Longest Talk Time | 8 hours |
| Maximum Standby Time | 11 days |
| Working Temperature | 0℃-40℃ |
| Storage Temperature | 0℃-40℃ |
4.2 Wireless Adapter Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | V4.2 |
| Transmission Distance | 8-10 meters |
| Battery | Lithium ion polymer (130mA/3.7V) |
| Charging Time | Less than 1 hour |
| Standby Time | More than 15 hours |
| Working Temperature | -15℃-40℃ |
| Storage Temperature | -25℃-60℃ |
4.3 Wireless PTT Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | 5.0 |
| Transmission Distance | 6-8 meters |
| Battery | Lithium ion polymer (90mA/3.7V) |
| Charging Time | Less than 1 hour |
| Standby Time | Greater than 13 hours |
| Working Temperature | -15℃-40℃ |
| Storage Temperature | -25℃-60℃ |

Figure 6: Diagram illustrating the Advanced Qualcomm Chip with Bluetooth 4.2, lower delay, and CVC.

Figure 7: Infographic detailing charging and working times for the headset, adapter, and PTT.
5. Setup and Pairing
Follow these steps to set up and pair your Retevis EEK013 system:
- Charge Devices: Fully charge the Bluetooth Headset, Wireless Adapter, and Wireless PTT before first use. Refer to the 'Specifications' section for charging times.
- Connect Adapter to Radio: Plug the 2PIN Wireless Adapter into the Kenwood 2Pin connector port of your two-way radio.
- Power On Headset: Turn on the Bluetooth Headset using the power switch. The pilot lamp will indicate its status.
- Pair Headset: Put the Bluetooth Headset into pairing mode (refer to the headset's specific instructions for this, usually holding the power button).
- Pair Adapter: Ensure the Wireless Adapter is powered on and in pairing mode. It will automatically attempt to connect to the headset.
- Pair Wireless PTT: Power on the Wireless PTT. It will automatically connect to the Bluetooth Headset and Wireless Adapter.
- Verify Connection: Check the indicator lights on all three devices to confirm successful pairing. A green light flashing every 2.5 seconds typically indicates a connected state.
Note: The system does not support dual standby, meaning it cannot be simultaneously connected to both a walkie-talkie and a mobile phone for active communication. You must switch between devices as needed.

Figure 8: Wireless connection options, illustrating pairing with either a walkie-talkie or a mobile phone.

Figure 9: Diagram showing the 10-meter effective connection range of the headset.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Use the power switch on the Bluetooth Headset and the power button on the Wireless PTT to turn them on or off.
- Volume Adjustment: Use the volume buttons (+/-) on the Bluetooth Headset to adjust the listening volume.
- Speaking: Press the 'Speaking Key' on the headset or the Wireless PTT button to transmit your voice.
- Listening: The headset will automatically receive audio when not transmitting.
- Switching Devices: If connected to both a radio and a phone (not simultaneously active), you may need to manually switch the connection via the headset's controls or your device's Bluetooth settings.
6.2 LED Status Indications
The indicator lights provide important information about the device's status:
- Red light always on: Device is sending (transmitting).
- Green light always on: Device is receiving.
- Green light flashes every 1 second: Device is in a disconnected state.
- Green light flashes every 2.5 seconds: Device is in a connected state.
- Red light flashes once every 10 seconds: Low battery alarm.

Figure 10: Adjustable ear hooks for comfortable fit and the wireless finger PTT for convenient operation.
7. Maintenance
- Cleaning: Wipe the devices with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Charging: Charge the devices regularly, especially if they will not be used for an extended period, to maintain battery health.
- Storage: Store the devices in a cool, dry place within the specified storage temperature range (-25℃ to 60℃ for adapter/PTT, 0℃ to 40℃ for headset).
- Avoid Extreme Conditions: Do not expose the devices to extreme temperatures, direct sunlight, or moisture.
8. Troubleshooting
8.1 Common Issues and Solutions
- No Power: Ensure the device is fully charged. Check the charging cable and power source.
- Cannot Pair: Make sure all devices are within the effective transmission range (10 meters for headset, 8-10 meters for adapter, 6-8 meters for PTT). Ensure devices are in pairing mode. Try restarting all devices.
- No Audio/Poor Audio Quality: Check volume levels on the headset and the connected radio/phone. Ensure the headset is properly seated in your ear. Verify the connection status via LED indicators.
- PTT Not Working: Ensure the Wireless PTT is charged and connected. Check its indicator light.
- Voice Transmission Delay/Clipping: Some users have reported a potential delay or clipping of the first second of voice transmission when using the PTT button. Ensure a stable connection and try speaking clearly after a brief pause once the PTT is pressed. If the issue persists, ensure your radio's firmware is up to date or consult the radio's manual for compatibility settings.
9. User Tips
- Safe Driving: Utilize the wireless finger PTT for safer and easier communication while driving, keeping your hands on the wheel.
- Single Device Connection: Remember that the system does not support simultaneous dual standby with both a walkie-talkie and a mobile phone. Plan your usage accordingly.
- Ear Hook Adjustment: The adjustable ear hooks are designed to fit both left and right ears comfortably. Adjust them for a secure and comfortable fit during extended use.
10. Warranty and Support
For warranty information and technical support, please refer to the official RETEVIS website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.