Robotime Zodiac Wall Clock & Time Engine Calendar Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Robotime Zodiac Wall Clock (Model LC601) and Time Engine Calendar (Model LC801) 3D wooden puzzles. These kits offer a unique blend of steampunk design and intricate mechanical assembly, providing an engaging and rewarding building experience. Please read all instructions carefully before beginning assembly.

2. Safety Information

• Warning: Small Parts. Not for Children Under 3 Years. This product contains small components that may pose a choking hazard.
• Adult supervision is recommended for users under 14 years of age during assembly.
• Handle wooden pieces with care to avoid splinters or breakage.
• Keep away from open flames or excessive heat sources.
• Do not expose the product to water or high humidity, as this may damage the wood.

3. Package Contents

Each kit includes:

• Pre-cut wooden puzzle pieces (quantity varies by model).
• Detailed English instruction manual.
• Necessary accessories (e.g., quartz movement for clocks, acrylic brackets).

Note: Batteries and wax are not included due to international shipping regulations. Please prepare these separately if required for your model.

4. Specifications

The Zodiac Wall Clock features a 12 constellations dial plate, month/week dial, and date dial. The Time Engine Calendar features a date dial, week turntable, and month turntable.

Figure 1: Zodiac Wall Clock Dimensions (Model LC601)

Figure 2: Detailed Product Information for LC601 and LC801

5. Assembly Instructions

Both the Zodiac Wall Clock and Time Engine Calendar are designed for physical assembly using a tenon and tenon process, requiring no glue for the main structure. Follow the detailed step-by-step instructions provided in your kit's manual.

General Assembly Tips:

• Carefully detach each wooden piece from its sheet. Use a small tool or your fingers to gently push them out.
• Identify all parts before starting. Refer to the parts diagram in your manual.
• Follow the numerical sequence in the instruction manual.
• Ensure pieces fit snugly. If a piece is too tight, gently sand the edges. Do not force pieces, as this may cause breakage.
• For moving parts, ensure they can rotate freely after assembly.

Figure 3: Assembly Process with Wooden Pieces and Manual

6. Operating Instructions

6.1 Zodiac Wall Clock (LC601)

• Setting the Time: The clock uses a quartz movement. Insert the required battery (not included) into the movement. Use the small knob on the back of the clock mechanism to set the correct time.
• Adjusting Date/Month/Week/Zodiac: The date, month, week, and zodiac dials are adjusted manually. Rotate the corresponding gears or dials to align with the current date, month, week, and zodiac sign.
• Placement: The Zodiac Wall Clock can be placed on a flat surface using its stand or mounted on a wall using a wall nail or stick placement method (hardware not included).

Figure 4: Zodiac Wall Clock Dials

Figure 5: Zodiac Dial and Calendar Mechanism

Figure 6: Quartz Movement and Mounting Options

6.2 Time Engine Calendar (LC801)

• Setting the Time: The Time Engine Calendar also includes a quartz clock movement. Insert the required battery (not included) and set the time using the knob.
• Adjusting Date/Month/Week: The date, month, and week are adjusted manually by rotating the respective turntables.

Figure 7: Time Engine Calendar Dials and Adjustment

7. Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the wooden surfaces. Avoid using wet cloths or harsh cleaning agents.
• Storage: Store the assembled model in a dry environment away from direct sunlight and extreme temperature changes to prevent warping or fading of the wood.
• Battery Replacement: For models with a clock mechanism, replace the battery as needed. Ensure correct polarity when inserting new batteries.
• Lubrication (Optional): For smoother operation of gears, a small amount of wax (not included) can be applied to the moving parts as indicated in the detailed manual.

8. Troubleshooting

Q: Do the date, month, and zodiac dials move automatically with the clock?

A: No, these dials are designed for manual adjustment. They do not move automatically with the quartz clock mechanism.

Q: Is glue required for assembly?

A: The models are designed for physical splicing using a tenon and tenon process, meaning all parts interlock precisely without the need for glue. However, if you wish for extra stability, a small amount of wood glue can be used on non-moving parts, but it is generally not necessary.

Q: Is the clock mechanism functional and easy to read?

A: Yes, the clock mechanism is a functional quartz movement. The numbers are clear and designed to be easily readable, allowing it to be used as a normal clock.

Q: Are batteries included?

A: No, batteries are not included in the package due to shipping restrictions. You will need to provide the appropriate battery for the quartz movement (typically AA or AAA, refer to the specific manual for your model).

9. User Tips

• Painting Pieces: It is generally acceptable to paint the wooden pieces with watercolors before assembly. This should not affect the functionality, especially if the paint is applied thinly and allowed to dry completely. Be mindful of painting interlocking parts to ensure they still fit.
• Patience is Key: These models are intricate. Take your time during assembly, follow the instructions carefully, and enjoy the process.
• Gift Idea: These 3D wooden puzzles make excellent gifts for DIY enthusiasts, children (with adult supervision), and anyone who appreciates unique home decor.

10. Warranty and Support

For any questions, missing parts, or support inquiries regarding your Robotime 3D Wooden Puzzle, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty details and contact information.