1. Introduction
The Velex VX508 Marine Bluetooth Amplifier delivers weather-resistant, superior sound quality, allowing users to enjoy personal music without a head unit through wireless Bluetooth. It is suitable for motorcycles, hot rods, UTVs, boats, golf carts, farm tractors, snowmobiles, ATVs, or even riding lawnmowers. The VX508 is small-footprint and can be easily hidden. It pairs with any Bluetooth-compatible media device to provide 300 watts of peak power (150W x 2 at 4 Ohms) to any speaker system in most vehicles.
It includes a wired remote that controls device volume and other basic functions, which can be positioned within the driver's reach, mounted onto a surface or flush style. It boasts powered speaker outputs for adding a pair of speakers, resulting in a complete audio system. Further, it also provides line-level outputs and can be used with higher powered amplifiers in a larger system. Although it serves as the source unit, the VX508 is designed to draw little current and be more efficient.
Package Contents
The package contains the following items:
- 1-VX508 Bluetooth 2-CH Class D Amplifier
- 1-Multi-Function Controller
- 1-Flush Mount Bezel (preinstalled on the remote)
- 1-Handlebar Mounting Bracket & Hardware Kit
- 1-Power Harness
- 1-User Manual

2. Important Safety Precautions
- BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
- Do not turn up the volume so high that you can't hear what's around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
- Do not operate mobile video equipment while driving a motorized vehicle - safe driving and safety consideration of others should always be your highest priority.
- Set your volume control at a low setting, then slowly increase the sound until you can hear it comfortably without distortion, or ear discomfort.
- In the event you should notice smoke, strange noises or odor from this product, or any other abnormal signs, immediately turn off the power and consult a technician. Using this product in this condition may result in permanent damage to the system.
Installation Precautions
WARNING: Always consult with a professional installer
- Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
- The VX508 should be powered directly to a vehicle battery.
- When wiring directly to a vehicle battery, be sure to disconnect the battery's negative terminal wire before starting any wiring procedures. If extending the main power wire, it is suggested that an optional fuse and fuse holder (not included) with a minimum rating of 20 Amperes be in-line with the positive battery terminal.
- The ground cable length should not exceed 18 inches.
- The VX508 has a weather-resistant design; it should not be submerged in or under water under any circumstances.
- Use only the installation parts provided with the VX508.
CAUTION!! Using other mounting methods may void this warranty.
3. Setup and Installation
Before Installing This Product
To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
When replacing the fuse, be sure to only use a fuse of the rating specified on this product (10A for the power harness, 20A for the main power wire if extended).
To avoid short-circuiting, cover any disconnected lead with insulating tape. It is especially important to insulate any unused wires, which if left uncovered may cause a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. The black cable is ground; make sure to connect the ground wire first.
Ensure that the ground cable is properly connected to metal parts of the vehicle's body frame or directly to the battery if your vehicle does not have a grounded chassis frame. The ground cable of this unit's power amp and a second powered system must be connected to the frame separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire or malfunction.
Tools Needed
- Wrench and/or Pliers
- #2 Philips screwdriver
- Crimp tool
- Electrical tape
Wiring Diagram

CAUTION!! Do not ground or short the PINK antenna wire.
4. Suggested Mounting Methods
The VX508 can be mounted in three different configurations:
Flush Mount
The flush mount quick mount bezel requires no screws. Use cutout dimensions: 3-3/16" W x 1-11/16" H (82mm x 43mm).
Surface Mount
The flush mount bezel has two recessed screw holes to facilitate the included two oval-head screws.
Handlebar Mount
Use the provided pan-head screws and stainless steel clamp. There are three mounting variations to secure the stainless steel clamp; try the best one for your application. Securely tighten the stainless clamp to fit your application.

Tip:
To release the VX508 controller from the mounting bezel, insert a small jeweler's screwdriver into the left/right slots of the bezel.
5. Operation
Getting to Know Your VX508 Multifunction Controller (MFC)

- MFC-Multifunctional Controller
- SRC (Source) Button: Purple = AUX IN / Red = USB Mode = Bluetooth
- Volume Up Button
- Next Track / EQ Setting Button (Short Press: Next Track / Long Press: EQ Setting)
- Play / Pause Button
- Volume Down Button
- Previous Track / EQ Setting Button (Short Press: Previous Track / Long Press: EQ Setting)
Bluetooth Operation
Pairing & Discovering a New Bluetooth Connection
- Power on the VX508 by short pressing the SRC button. The Bluetooth blue LED will switch on, and a confirmation tone will be heard, signaling that the VX508 is now ready for Bluetooth pairing.
- For Android users:
- Go into the Setting Menu of your device.
- Enter the Bluetooth Menu and press SCAN.
- VX508 (VELEX) will now be displayed under AVAILABLE DEVICES.
- If prompted, enter passcode: "0000".
- For iOS users:
- Go into the Setting Menu of your device.
- Enter the Bluetooth Menu.
- VX508 (VELEX) will now be displayed.
- If prompted, enter passcode: "0000".
- If the VX508 is not seen, repeat the above steps to refresh the “Device List”.
- When the connection is successful, you are now ready to stream music from your device's favorite media player to the VX508.
- Press and hold the SRC button to power off the VX508.
Tip:
To avoid battery exhaustion, be sure to run the vehicle's engine while using this product. Using this product without running the engine can drain the battery.
Reconnection
- Power on the VX508 and your last paired Bluetooth Device.
- The unit will now automatically reconnect.
- If your device was previously paired with the VX508, but it wasn't the last paired device:
- Ensure no other devices are currently paired.
- Enter the Bluetooth Menu on your device being paired.
- VX508 will display under AVAILABLE DEVICES.
- Choose the VX508 to reconnect.
- If the device is out of range from the VX508, it will disconnect automatically:
- To reconnect once the device is back in range, press the Power button once.
- The VX508 will now reconnect to the device, and a confirmation tone will be heard from the speakers.
Streaming Music
Use the multifunction controller for music playback:
- Press the Play/Pause button once to start playing music or press the PLAY button from your device's touch screen. Pressing it again will PAUSE playback.
- To skip songs or advance, press the NEXT TRACK button. Press and hold to FAST FORWARD.
- To select the previous song, press the PREVIOUS TRACK button. Press and hold to FAST REWIND.
Tip:
Turn the BLUETOOTH volume level on your device to its 100% level for optimal sound quality.
Volume Control
- To raise the VOLUME, press the UP button.
- To lower the VOLUME, press the DOWN button.
- To MUTE / UN-MUTE the VOLUME, press the PLAY/PAUSE button.
EQ Setting
Press and hold the Next Track (>>) or Previous Track (<<) button for 2 seconds. The VX508 will switch between POP, JAZZ, CLASSIC, ROCK, and EQ OFF. A confirmation tone will be heard when the adjustment is complete.
AUX-IN Operation
The VX508 can play audio from any device that has a pair of RCA outputs.
- Power on the VX508 by short pressing the SRC button.
- Short press the SRC button again. The controller LED lighting will change to RED, indicating the system is in AUX-IN mode.
- Bluetooth devices will remain paired even in AUX-IN MODE.
- Connect the integrated RCA AUX-IN cable on the amplifier (if you have a 3.5mm jack device, please use a 3.5mm to RCA adaptor, which is not included).
- Route the audio wires back to a convenient storage place and secure your device.
6. Maintenance
To ensure the longevity and optimal performance of your Velex VX508 amplifier, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the amplifier and remote control. Do not use harsh chemicals, cleaning solvents, or strong detergents, as these may damage the finish or internal components.
- Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Fuse Replacement: If the fuse blows, replace it only with a fuse of the same type and rating (10A for the power harness, 20A for the main power wire if extended). Using an incorrect fuse can cause damage or fire.
- Environmental Protection: While the VX508 is weather-resistant, avoid prolonged exposure to extreme conditions, direct water submersion, or high humidity. Ensure proper ventilation around the amplifier to prevent overheating.
- Storage: If the unit will not be used for an extended period, disconnect it from the power source and store it in a cool, dry place.
7. Troubleshooting Guide
| Trouble | Cause | Solution |
|---|---|---|
| Unit will not turn on | The fuse is blown | Check / replace the fuse |
| Unit will not turn on | Ignition not engaged | Turn ignition to on position |
| No sound is heard | Blown speaker | Replace faulty speaker |
| No sound is heard | Volume is low / muted | Press the volume level up |
| No sound is heard | Device is paused or muted | Check your device's playing / volume status |
| Can not pair Bluetooth | The Bluetooth function of the device is not enabled | Refer to the user manual of the device for how to enable the Bluetooth function |
| The audio quality is poor after connection with a Bluetooth enabled device | The Bluetooth reception is poor | Move the device closer to the audio system or remove any obstacle between the device and the system's antenna |
| Unit has become unresponsive | Power glitch or interference | Disconnect power for 10 seconds to reset |
8. Specifications
Bluetooth
- BT: 5.0
- BT Range: 33FT / 10 M (CLASS 2)
- BT Profiles: A2DP
Amplifier
- Channels: 2 Class D
- MAX Continuous Output: 150W x 2 Peak @4ohm speaker
- PEAK Power Rating
- RMS Total Power Output: 150W x 2
- Class AB
- Bridgeable to 300W x 1 peak @ 8ohm speaker, only for professional
- Frequency response: 20-20KHz
- 4 Ohm stable
- Input impedance: 22K Ohm
Chassis
- Dimension: W x L x H: 99 x 203 x 50 mm
- Controller Dimensions W x L x H: 47 x 95 x 22 mm
- Controller cable length: 3m
- Quick connect Molex power harness
General
- Power source: 14.4VDC (10.8 - 16V Allowable)
- Grounding System: Negative type
- Maximum Current Consumption: 20A
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- USB output voltage: 5VDC @1A
- Unit weight: 2.08lbs / 0.94kgs
- Storage Temperature: 5°F to 113°F / -15°C to 45°C
- Replacement Fuse: 10A (Replace with ATO Fuse Type Only).
9. User Tips
- Power Consumption: The amplifier is designed to be efficient, but it's recommended to run your vehicle's engine when using the amplifier for extended periods to prevent battery drain.
- Fuse Rating: If you extend the main power wire, ensure the in-line fuse is rated at a minimum of 20 Amperes. The power harness itself uses a 10A fuse.
- Weather Resistance: While the VX508 is weather-resistant, it is not waterproof. Avoid submerging the unit in water.
- Bluetooth Volume: For the best audio experience, set your connected Bluetooth device's volume to 100% and control the overall volume using the VX508's remote.
- RMS vs. Peak Power: The amplifier provides 150W x 2 RMS (Root Mean Square) power at 4 ohms, with a peak power rating of 300W. RMS is a more accurate measure of continuous power output.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Velex website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.
A detailed user manual is available in PDF format for further reference: Velex VX508 User Manual (PDF).