FGHGF Swicth (AS106)

Contents

Motorized Damper Valve Switch User Manual

Brand: FGHGF | Model: Swicth (AS106)

I. Introduction

This manual provides essential information for the safe and effective use of your FGHGF Motorized Damper Valve Switch. This device is designed for controlling electric air dampers in HVAC (Heating, Ventilation, and Air Conditioning) systems, offering 5-position angle control for precise air volume adjustment.

II. Warning & Safety Information

  • Do not disassemble: Unless you are a qualified engineer, do not attempt to disassemble the unit. Unauthorized disassembly can lead to electric shock, damage to the device, or void the warranty.
  • Avoid Moisture: Do not operate the switch in high-humidity environments or allow it to come into contact with water. This can cause electrical short circuits and damage.
  • Qualified Installation: Installation and wiring should only be performed by qualified personnel to ensure safety and proper functionality.

III. Setup Instructions

1. Mounting and Fixing

Install the damper valve switch onto the designated location on the air damper. Ensure it is securely fixed to prevent movement during operation. The switch is designed for wall-mounted installation.

2. Power Connection

Connect the power cable to the switch terminals according to the wiring diagram provided. Ensure all connections are tight and correct before turning on the control switch. The recommended wiring diameter is 1.5mm².

Back view of the Motorized Damper Valve Switch showing wiring terminals and specifications.

Figure 1: Back view of the switch with wiring terminals and specifications.

Wiring Diagram Interpretation:

The back of the switch features terminals labeled N, 1, 2, 3, and L. Based on the Chinese text on the product, these correspond to:

  • N: Neutral
  • L: Live (Phase)
  • 1: Common Terminal
  • 2: Forward Rotation Terminal (for damper movement in one direction)
  • 3: Reverse Rotation Terminal (for damper movement in the opposite direction)

Ensure the correct voltage (AC220V or AC/DC24V) is supplied as per your specific model and actuator requirements. This switch is suitable for 0-90 degree actuators with an operating time between 35s and 120s.

IV. Operating Instructions

1. Function Overview

The Motorized Damper Valve Switch is capable of controlling the opening and closing angle of an electric air damper. It features a 5-position angle control, allowing for precise adjustment of air flow from 0° to 90°.

Front view of the 5-position angle switch with angle indicators and control buttons.

Figure 2: Front view of the switch with angle indicators and control buttons.

2. Using the 5-Position Control

The switch features two push buttons (up and down arrows) to adjust the damper's angle. The indicator lights on the top show the current position: 0°, 18°, 36°, 54°, 72°, and 90°. Press the appropriate button to move the damper to the desired angle. The switch operates with low-power consumption for energy-efficient operation.

V. Maintenance

The damper valve switch requires minimal maintenance. Keep the surface clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents. Regularly inspect wiring connections for any signs of wear or looseness.

VI. Troubleshooting

Failure to Start

  • Check Wiring: Ensure all wiring connections are correct and secure according to the diagram in Section III.
  • Power Supply: Verify that the correct voltage (AC220V or AC/DC24V) is being supplied to the switch and that power is turned on.
  • Actuator Compatibility: Confirm that the connected actuator is compatible with the switch's specifications (0-90 degree, 35s-120s operating time).

VII. Specifications

FeatureDetail
Product NameAngle Switch
Model NumberSwicth (AS106)
Brand NameFGHGF
VoltageAC220V; AC/DC24V (suitable for 0-90 degree, 35s-120s actuators)
Output Load220V 3A
Wiring Diameter1.5mm²
TypePush button switch / Damper / Air Conditioner Parts
ApplicationIndustrial, Ventilation system
Gear Position0~90° 5-Position (0°, 18°, 36°, 54°, 72°, 90°)
InstallationWall-mounted
Certification3C
OriginMainland China

VIII. User Tips

  • Verify Wiring Carefully: As noted by other users, the connection diagram is crucial. Double-check all terminal connections (N, L, 1, 2, 3) before applying power to avoid damage.
  • Voltage Selection: Ensure you select the correct voltage variant (AC220V or AC/DC24V) that matches your existing HVAC system and actuator.
  • Actuator Compatibility: This switch is specifically designed for actuators that operate within a 0-90 degree range and have an operating time between 35 and 120 seconds. Confirm your actuator meets these specifications for optimal performance.

IX. Warranty & Support

For technical support, troubleshooting assistance, or any questions regarding your Motorized Damper Valve Switch, please contact our customer service. You may also refer to the official user manual PDF for additional details: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.