1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Anpviz 35ZJ Camera Bracket. This bracket is designed to securely mount compatible Anpviz PTZ POE IP cameras, ensuring optimal positioning and stability for your surveillance system. Please read this manual thoroughly before installation and keep it for future reference.
2. Product Overview
The Anpviz 35ZJ is a robust mounting bracket specifically engineered for select Anpviz PTZ POE IP cameras. Its durable construction ensures reliable support for your camera in various environments.


Compatible Camera Models:
- Anpviz IPC-Z35505ES
- Anpviz IPC-Z35805ES
- Anpviz IPC-Z35512ES
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | 35ZJ |
| Brand | Anpviz |
| Origin | Mainland China |
| Material | Metal (White finish) |
| Package Dimensions (L x W x H) | 12 cm x 6 cm x 5 cm |
| Package Weight | 0.3 kg |
| Compatibility | Anpviz PTZ POE IP Camera models: IPC-Z35505ES, IPC-Z35805ES, IPC-Z35512ES |
4. Setup and Installation
Follow these steps to properly install your Anpviz 35ZJ camera bracket and mount your compatible camera.
4.1 Tools Required
- Drill
- Drill bits appropriate for your mounting surface (e.g., masonry, wood)
- Screwdriver (Phillips head recommended)
- Pencil or marker
- Measuring tape
- Safety glasses
4.2 Mounting the Bracket
- Select Mounting Location: Choose a sturdy surface (wall, ceiling) that can support the weight of the bracket and camera. Ensure the location provides the desired camera view and is within reach of necessary cabling.
- Mark Drill Holes: Hold the bracket against the chosen surface. Use a pencil or marker to accurately mark the positions for drilling through the bracket's mounting holes. Refer to Figure 2.2 for hole locations.
- Drill Holes: Using the appropriate drill bit, carefully drill holes at the marked positions. If mounting on masonry or concrete, insert wall anchors (not included) into the drilled holes.
- Secure the Bracket: Align the bracket with the drilled holes. Insert screws (not included, choose screws suitable for your mounting surface and anchors) through the bracket's mounting holes and tighten them securely. Ensure the bracket is firmly attached and does not wobble.
4.3 Attaching the Camera
- Prepare Camera: Ensure your Anpviz PTZ POE IP camera is ready for mounting.
- Align Camera: Carefully align the camera's mounting points with the corresponding holes on the Anpviz 35ZJ bracket.
- Secure Camera: Use the screws provided with your camera (or suitable screws) to firmly attach the camera to the bracket. Do not overtighten, but ensure the camera is stable and secure.

5. Operating Instructions
The Anpviz 35ZJ camera bracket is a passive mounting accessory. Its primary function is to provide a stable and secure platform for your compatible Anpviz PTZ POE IP camera. Once installed, ensure the camera is correctly oriented and its field of view is as desired. Any operational adjustments (e.g., pan, tilt, zoom, focus) are performed directly on the camera or through its associated software/NVR system, not on the bracket itself.
6. Maintenance
To ensure the longevity and optimal performance of your Anpviz 35ZJ camera bracket:
- Regular Cleaning: Periodically wipe the bracket with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
- Check Fasteners: Every 6-12 months, inspect all screws and mounting hardware to ensure they remain tight and secure. Vibrations or environmental factors can sometimes cause fasteners to loosen over time.
- Inspect for Damage: Check the bracket for any signs of corrosion, cracks, or physical damage, especially after severe weather conditions. Replace the bracket if any significant damage is observed.
7. Troubleshooting
Most issues related to the bracket are installation-related. Here are some common concerns and their solutions:
- Camera is wobbly or unstable:
- Ensure all mounting screws securing the bracket to the surface are fully tightened.
- Verify that the screws attaching the camera to the bracket are secure.
- Check the mounting surface for stability. If the surface itself is unstable, the bracket and camera will also be unstable.
- Bracket appears loose on the wall:
- Re-tighten all screws. If using wall anchors, ensure they are properly seated and not stripped. You may need to use larger anchors or relocate the bracket if the original holes are compromised.
- Bracket does not fit my camera:
- Confirm that your camera model is one of the compatible Anpviz PTZ POE IP cameras listed in Section 2 (IPC-Z35505ES, IPC-Z35805ES, IPC-Z35512ES). This bracket is designed for specific models and may not be universally compatible.
8. User Tips
- Verify Compatibility: Always double-check your camera's model number against the bracket's compatibility list before purchase and installation to avoid issues.
- Pre-Drill Pilot Holes: For wooden surfaces, pre-drilling pilot holes slightly smaller than your screws can prevent wood splitting and ensure a tighter fit.
- Cable Management: Plan your cable routing before final installation to ensure a neat and secure setup, preventing cables from being pinched or exposed to damage.
9. Warranty and Support
Anpviz products are designed for reliability and performance. Most products come with a 14-month warranty from the date of purchase, covering manufacturing defects.
For technical assistance, troubleshooting, or warranty claims, please contact Anpviz customer support. Our professional after-sale team is available to help you resolve any issues you may encounter.
Please retain your proof of purchase for warranty validation.
10. Frequently Asked Questions (FAQ)
- Q: Are Anpviz products genuine and of guaranteed quality?
- A: Yes, all products sold by Anpviz are genuine and come with guaranteed quality.
- Q: What is the warranty period for Anpviz products?
- A: Most Anpviz products, including this bracket, typically have a 14-month warranty from the purchase date.
- Q: Can this bracket support an Ankee dome camera?
- A: This Anpviz 35ZJ bracket is specifically designed for Anpviz PTZ POE IP Camera models IPC-Z35505ES, IPC-Z35805ES, and IPC-Z35512ES. Compatibility with other brands or models, such as Ankee, is not guaranteed. Please check the mounting specifications of your camera against the bracket's design.