1. Introduction
This manual provides essential information for the proper installation, maintenance, and care of your new washable plastic filter parts. These filters are designed to maintain the cleaning performance of your robot vacuum cleaner and reduce the infiltration of dust, pollen, and other allergens into the air.
2. Product Overview
The washable plastic filter is a crucial component for your robot vacuum, capturing fine dust and debris to ensure efficient cleaning and air quality. Its washable design allows for extended use and easy maintenance.
3. Compatibility
These filter parts are compatible with the following robot vacuum cleaner models:
- Ecovacs DEEBOT N79S
- Ecovacs DEEBOT N79
- Cecotec Conga Excellence 990
- Cecotec Conga Excellence 5040
- Eufy RoboVac 11
- Eufy RoboVac 11C
- iboto aqua V710
Please ensure your robot vacuum model is listed above for proper fit and function.
4. Installation (Filter Replacement)
Follow these general steps to replace the filter in your compatible robot vacuum cleaner. Specific steps may vary slightly by model; refer to your robot vacuum's original manual for detailed instructions on accessing the filter compartment.
- Power Off: Ensure your robot vacuum cleaner is powered off and disconnected from its charging base.
- Locate Dust Bin: Remove the dust bin from your robot vacuum cleaner.
- Remove Old Filter: Open the dust bin and carefully remove the old filter. Dispose of the old filter responsibly.
- Insert New Filter: Place the new washable plastic filter into the designated slot in the dust bin. Ensure it is seated correctly and securely.
- Reinstall Dust Bin: Close the dust bin and reinsert it into the robot vacuum cleaner until it clicks into place.
- Power On: You may now power on your robot vacuum cleaner.
5. Maintenance
Regular maintenance of your filter is crucial for optimal performance and longevity of your robot vacuum. These filters are designed to be washable.
- Regular Cleaning: After each cleaning cycle or as needed, remove the filter from the dust bin.
- Washing: Rinse the filter under running water until all dust and debris are removed. Do not use harsh detergents or brushes that could damage the filter material.
- Drying: Allow the filter to air dry completely before reinstalling it into the dust bin. Ensure it is thoroughly dry to prevent mold or mildew growth and to maintain vacuum suction.
- Replacement Frequency: For best results and to maintain peak cleaning performance, it is recommended to replace the filter every 1 to 3 months, depending on usage and environment.
6. Specifications
| Feature | Detail |
|---|---|
| Material | Plastic |
| Vacuum Part Type | Filters |
| High-concerned chemical | None |
| Origin | Mainland China |
| Type | Vacuum Cleaner Parts |
| Package Contents | 1 x Dust Filter |
7. Troubleshooting
This section addresses common issues related to filter performance. If you encounter problems not listed here, please refer to your robot vacuum's main instruction manual or contact customer support.
- Reduced Suction Power: This is often caused by a clogged filter. Clean the filter thoroughly as described in the Maintenance section. If the issue persists after cleaning, the filter may need to be replaced.
- Unusual Odors: Ensure the filter is completely dry before reinstallation. A damp filter can lead to mold or mildew, causing odors. If odors persist, replace the filter.
8. User Tips
- For households with pets or high dust levels, consider cleaning your filter more frequently than recommended, perhaps after every few uses, to maintain optimal performance.
- Always have a spare filter on hand. This allows you to continue using your robot vacuum while one filter is drying after washing.
9. Warranty and Support
For any questions regarding the product, warranty claims, or technical support, please contact the seller or refer to the original purchase documentation. This manual covers the replacement filter parts; for issues related to the robot vacuum itself, consult its manufacturer's support resources.
