1. Safety Instructions
WARNING!
Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
1.1 Electrical Safety
- Plug Matching: The plug of the power tool must be compatible with the socket. Never modify the plug in any way.
- Avoid Electric Shock: When operating, avoid contact with grounded surfaces (such as pipes, radiators, refrigerators, etc.).
- Moisture Protection: Do not expose the power tool to rain or humid environments. Water entering the power tool increases the risk of electric shock.
- Handle the Cord: Never move, pull, or unplug the power cord. Keep the cord away from heat sources, oil, sharp edges, or moving parts.
1.2 Workplace Safety
- Keep Clean: Work areas should be kept clean and well-lit. Cluttered or dark areas can easily lead to accidents.
- Avoid Hazardous Environments: Do not operate power tools in environments with flammable liquids, gases, or dust (explosive atmospheres). Sparks from power tools may ignite dust or fumes.
- Keep Out of Reach for Children and Bystanders: Keep children and bystanders away from power tools while operating them. Distraction may cause you to lose control.
1.3 Personal Safety
- Stay Alert: Stay alert and focused while operating the tool. Do not use the tool when fatigued or under the influence of drugs or alcohol.
- Protective Equipment: Wear a dust mask, non-slip safety shoes, a safety helmet, and hearing protection as needed.
- Prevent Accidental Start-up: Ensure the switch is in the off position before connecting to power. Do not place your fingers on the switch when handling the tool.
- Remove Adjustment Tools: Always remove the adjustment key or wrench before starting the tool.
- Maintain Balance: Do not overextend; always maintain a stable foothold and body balance.
- Dress Appropriately: Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
2. Product Overview
2.1 Components
The Tungfull Mini Electric Drill features a robust design for various tasks. Key components include:
- Three-Jaw Chuck: For secure attachment of accessories.
- 6-Speed Control: Allows for precise speed adjustment.
- Carbon Bush Mouth: Essential for motor operation.
- Power Switch: To turn the tool on and off.
- Heat Dissipation Vents: Designed for efficient cooling and extended tool life.
- Hangable Loop: For convenient storage.

Figure 2.1: Mini Electric Drill with labeled components and dimensions.

Figure 2.2: Flexible shaft attachment with dimensions and clamping range.
2.2 Accessories
The drill comes with a comprehensive set of accessories for various applications:

Figure 2.3: Assortment of grinding, brushing, sanding, and cutting accessories.
- Grinding Stones
- Steel Brushes
- Nylon Brushes
- Sanding Bands
- Diamond Burs
- Buffer Wheels
- Drill Bits
- Cutting Discs
- Flexible Shaft (approx. 110cm, clamping range 0.3-4.0mm)
- Safety Glasses
2.3 Specifications
| Feature | Specification |
|---|---|
| Product Power | 480W |
| Power Source | AC |
| Rated Voltage | 220V or 110V (Please specify when ordering) |
| Frequency | 50/60Hz |
| No-Load Speed | 5,000-30,000 rpm (Variable speed, 6 steps adjustable) |
| Collect Chuck Diameter | 0.5-6.0mm (Three-jaw chuck) |
| Max. Drilling Diameter | 6.0mm |
| Weight | 1.9kg |
| Power Cord Length | 1.5 m |
| Material | Plastic / Metal |
| Certification | CE |
3. Setup
- Unpacking: Carefully remove the mini electric drill and all accessories from the packaging. Inspect for any damage.
- Power Connection: Ensure the power switch on the tool is in the 'OFF' position. Plug the power cord into a compatible electrical outlet (220V or 110V, depending on your model).
- Attaching Accessories:
- Loosen the three-jaw chuck by rotating it counter-clockwise.
- Insert the desired accessory (e.g., drill bit, grinding stone) into the chuck. Ensure it is seated firmly and centered.
- Tighten the chuck by rotating it clockwise until the accessory is securely held. Do not overtighten.
- If using the flexible shaft, attach it to the main unit's chuck and then insert the desired accessory into the flexible shaft's chuck.

Figure 3.1: Close-up of the three-jaw chuck for accessory installation.
4. Operation
4.1 Basic Operation
- Power On: Once an accessory is securely attached and the tool is plugged in, press the power switch to turn the tool on.
- Speed Adjustment: Use the 6-step speed control dial to adjust the rotation speed according to the material and task. Start with a lower speed and gradually increase if needed.
- Operation: Apply gentle, consistent pressure. Let the tool do the work. Avoid excessive force, which can damage the tool or workpiece.
- Power Off: To stop the tool, press the power switch to the 'OFF' position. Unplug the power cord from the outlet after use.

Figure 4.1: Six-speed adjustment switch.
4.2 Applications
The Tungfull Mini Electric Drill is versatile and can be used for various tasks:
- Drilling: Use appropriate drill bits for wood, metal, ceramic, or plastic.
- Polishing: Attach buffer wheels or polishing pads for smoothing surfaces.
- Engraving: Utilize diamond burs or engraving bits for detailed work.
- Cutting: Employ cutting discs for precise cuts on various materials.
- Grinding: Use grinding stones for shaping and deburring.
- Carving: Suitable for intricate carving tasks.




Figure 4.2: Examples of various applications.
4.3 Product Demonstration Video
Video demonstrating the cutting and polishing capabilities of the Tungfull Mini Electric Drill.
5. Maintenance and Care
5.1 Cleaning
- WARNING! Always unplug the tool from the socket before performing any cleaning or maintenance.
- Clean the tool casing with a soft, damp cloth. Do not use any abrasive or solvent-based cleaners.
- Clean the vents regularly to prevent dust buildup. It is recommended to use compressed air to blow dust out of the vents.

Figure 5.1: Heat dissipation vents for maintenance.
5.2 Storage
- Store the tool in a dry, safe place out of reach of children.
- When storing, it is recommended to place the forward/reverse switch in the middle position (locked) to prevent accidental activation.
6. Troubleshooting
If you encounter issues with your Tungfull Mini Electric Drill, refer to the following common troubleshooting steps:
- Tool not turning on:
- Check if the power cord is securely plugged into a working outlet.
- Ensure the power switch is in the 'ON' position.
- Verify that the power outlet is functional by testing it with another device.
- Reduced performance or overheating:
- Check if the heat dissipation vents are clear of dust and debris. Clean them if necessary.
- Ensure you are using the correct speed setting for the task and not applying excessive pressure.
- Verify that the accessory is properly installed and not damaged.
- Excessive vibration or noise:
- Ensure the accessory is securely tightened in the chuck and is not bent or damaged.
- Check for any loose parts on the tool.
For persistent issues, please contact customer support.
7. User Tips
- Choose the Right Accessory: Always select the appropriate accessory for the material and task to ensure optimal performance and safety.
- Start Slow: When beginning a new task or working with a new material, start with a lower speed setting and gradually increase it as needed.
- Gentle Pressure: Let the tool's speed and the accessory do the work. Applying too much pressure can lead to overheating, reduced efficiency, and potential damage to the tool or workpiece.
- Keep it Clean: Regularly clean the tool, especially the vents, to maintain performance and extend its lifespan.
8. Warranty and Support
8.1 Compliance Statement
This product complies with the essential requirements of relevant EU directives and bears the CE mark.
8.2 Manufacturer Information
Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen, China, 518000
Phone: 86-15089309815
Email: deng0124@163.com
For detailed information and the latest version of this manual, please refer to the official PDF document: Tungfull Mini Electric Drill User Manual (PDF).
Important Note: This manual is intended to provide general guidance. Actual operation must be based on actual site conditions and professional electrical standards. We reserve the right to update this manual as needed for product improvements; the latest version can be downloaded from our website.