Introduction
The DETONGER Portable Thermal Transfer Label Printer is a versatile and durable device designed for creating high-quality, long-lasting labels. Utilizing thermal transfer technology, it produces labels resistant to fading, making it ideal for fixed asset tagging, laboratory labeling, cable identification, and various commercial applications. This manual provides detailed instructions to help you set up, operate, and maintain your printer effectively.
Figure 1: DETONGER Portable Thermal Transfer Label Printer with included accessories.
Product Overview
Familiarize yourself with the components of your DETONGER label printer:
Figure 2: Key components of the DETONGER Label Printer.
- Top Cover: Protects the internal mechanisms and provides access for media loading.
- Ribbon Bin: Holds the thermal transfer ribbon.
- OLED Display: Shows printer status, connection information, and settings.
- Power/Setting Button: Turns the printer on/off and navigates settings.
- Paper Exit: Where printed labels emerge.
- USB Interface: For wired connection to a PC and charging.
- Power Interface: For connecting the power adapter.
- Feed Paper/Parameter Button: Feeds labels and adjusts parameters.
Setup Guide
Follow these steps to prepare your printer for use:
1. Install Ribbon and Label Roll
- Open the top cover of the printer.
- Insert the label roll into the designated slot. Ensure the label material feeds smoothly towards the print head.
- Insert the tightened ribbon into the ribbon bin.
- Switch the locking bar to the lock position to secure the ribbon.
- Adjust the black plate to fix the label in the proper width.
- Close the top cover.
- Press the right button (Feed Paper/Parameter Button) to feed the label for your first label installation. This ensures proper alignment.
Figure 3: Ribbon installation steps.
2. Bluetooth Connection
- Ensure your printer is powered on and Bluetooth is enabled on your mobile device (Android or iOS).
- Download the "WePrint" app from the App Store or Google Play. Alternatively, use the download link: https://en.detonger.com/weprint/.
- Open the "WePrint" app.
- In the app, navigate to the connection settings (usually represented by a Bluetooth icon or a settings menu).
- Select your DETONGER printer from the list of available devices. The printer's name might appear as "DT60S" followed by a serial number.
- Once connected, the Bluetooth indicator on the printer's OLED display should confirm the connection.
Video 1: Demonstrates label and ribbon installation, Bluetooth connection, and printing process.
3. PC Connection (Optional)
For Windows PC users, an online version of the software is available:
- Access the online version at: https://weida.dothantech.com.
- You may need to install the printer driver. Download it from: https://en.detonger.com/software-driver-download.html.
Operating Instructions
1. Choosing Label Templates and Modifying Content
- Open the "WePrint" app on your connected mobile device.
- Browse the available label templates. Free templates are accessible by logging into the WePrint App Cloud (Account: detonger, no password).
- Select a template that suits your needs.
- Use the app's interface to modify the label content. You can add text, pictures, lines, graphics, 1D barcodes, and 2D barcodes. The app supports multiple languages.
Figure 4: WePrint App interface for template selection and content editing.
2. Printing Labels
- After customizing your label, ensure the printer is connected and has sufficient label and ribbon supply.
- In the WePrint app, tap the "Print" button.
- Confirm the print settings (e.g., number of copies).
- The printer will then print your labels.
Figure 5: Example of printed cable labels.
The printer supports a printing width of 20-50mm.
Maintenance
To ensure optimal performance and longevity of your DETONGER label printer, regular maintenance is recommended:
- Cleaning the Print Head: Periodically clean the thermal print head with an alcohol wipe or a specialized print head cleaning pen to prevent print quality issues. Ensure the printer is off and cooled down before cleaning.
- Replacing Ribbon and Labels: Replace the thermal transfer ribbon and label rolls as needed. The printer uses a resin ribbon (50mm*30m).
- Battery Care: The printer is equipped with a 2600mAh lithium battery. Charge it for 6-7 hours for a full charge. Avoid completely draining the battery frequently to prolong its lifespan.
- Storage: Store the printer in a cool, dry place away from direct sunlight and extreme temperatures.
Ribbon Quantity Accounting
1 ribbon consumes 2 rolls of thermal transfer label. The ribbon is 30m long.
Figure 6: Printer with a built-in resin ribbon.
Troubleshooting
Here are solutions to common issues you might encounter:
- No Power:
- Ensure the power adapter is securely connected and the outlet is functional.
- Check if the battery is charged. Charge the printer for 6-7 hours if it's completely drained.
- Poor Print Quality:
- Clean the print head as described in the Maintenance section.
- Ensure the ribbon and label roll are correctly installed and not depleted.
- Check the label and ribbon type; ensure they are compatible thermal transfer media.
- Adjust print density settings in the app if available.
- Bluetooth Connection Issues:
- Make sure Bluetooth is enabled on both the printer and your mobile device.
- Restart both the printer and your mobile device.
- Ensure the printer is within the Bluetooth range.
- Forget the device in your phone's Bluetooth settings and try pairing again.
- Labels Not Feeding Correctly:
- Verify that the label roll is inserted correctly and the black plate is adjusted to the proper width.
- Press the Feed Paper button to advance a label and check for proper alignment.
- Ensure there are no obstructions in the paper path.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | DETONGER |
| Model | DT60S / DT60PLUS |
| Print Method | Thermal Transfer Printing |
| Resolution | 203 DPI / 300 DPI (Optional) |
| Max Print Width | 48mm |
| Print Speed | 15-60mm/s (varies by darkness setting) |
| Connect Mode | Bluetooth, Micro USB / Optional WiFi |
| Label Size | 54(W) x Dia. 65mm (Label width 20-50mm) |
| Printer Dimensions (L*W*H) | 205 x 106 x 78mm (8.07" x 4.17" x 3.07") |
| Weight | 725g |
| Battery Capacity | 2600mAh*7.4V Lithium Battery |
| Charge Time | 6-7 hours |
| Print Color | Black and White (other colors depend on ribbon) |
| Consumable Type | Label Paper (PET Fixed Asset Tag, Laboratory Label, Cable Label) |
| Application | For Commercial Use, Label Maker |
| Supports Network Printing | Wired/Wireless |
| Paper Feed Mode | Roll Feed |
| Display Type | OLED Display |
| Command Set | LPAPI, CPCL, compatible with ESC/POS |
| RFID (Optional) | UHF RFID 900MHz (ISO18000-6C / EPC Gen2 compatible); HF RFID 13.56MHz (14443-A / 15693 / NFC compatible) |
| Certifications | CE, FCC |
| Standard Accessories | Power Adapter, Battery, Optional Ribbon, USB Cable |
User Tips
- Label Versatility: While primarily designed for label paper, including PET fixed asset tags and cable labels, this printer is optimized for thermal transfer label materials. It is not intended for printing on fabric ribbon sashes for events.
- App Cloud Templates: Utilize the free label templates available in the WePrint App Cloud (Account: detonger, no password) to quickly create professional-looking labels.
- Power Bank Function: The printer has a power bank function, allowing it to print 150m-180m (at 12.5% print darkness) on a single charge, making it highly portable for on-the-go labeling needs.
Warranty and Support
Your DETONGER Portable Thermal Transfer Label Printer comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, troubleshooting assistance, or warranty claims, please contact DETONGER Official Store customer service. You can find contact information on the official DETONGER website or through your purchase platform.
For printer SDK or driver downloads, please visit: https://en.detonger.com/software-driver-download.html.