1. Introduction
Thank you for choosing the Mileseey Laser Level. This instrument is designed for precise leveling and alignment tasks in various applications, from home renovation to professional construction. It features high visibility laser lines, self-leveling capabilities, and robust construction for durability. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Safety Instructions
WARNING: LASER RADIATION. DO NOT STARE INTO BEAM.
- Always operate the laser level in a safe manner.
- Avoid direct eye exposure to the laser beam.
- Do not disassemble or modify the laser level. Repairs should only be performed by authorized personnel.
- Keep the device out of reach of children.
- Ensure the device is stable before operation to prevent falls and potential damage.
- Use only specified batteries or charging methods.
3. Package Contents
The standard package for the L52R (Rechargeable) model typically includes:
- Mileseey Laser Level Unit
- Carry Bag
- Tripod
- Velcro Strap
- USB Type-C Charging Cable
- AA Rechargeable Batteries (x2)
- User Manual
Note: Package contents may vary based on the specific model (e.g., 'not-charging' versions do not include a tripod, charging cable, or rechargeable batteries) and regional offerings. The L62 models do not include magnetic or strap fixing capabilities.


4. Product Overview
Familiarize yourself with the components of your Mileseey Laser Level:

5. Specifications
The Mileseey Laser Level series offers various models with distinct features. Below are general specifications and a comparison table for common models.
| Feature | Specification |
|---|---|
| Model | L52R (Red) / L52G (Green) |
| Laser Class | Level 2 (IEC / EN60825-1 /2014) |
| Accuracy | ±1.5mm at 5m |
| Horizontal Angle | 4° |
| Automatic Anping (Self-Leveling) | Yes |
| Wall Mounting System | Yes |
| Protection Level | IP54 |
| Anti-drop Level | 1.5m |
| Power Type | Type-C charging / 2* AA battery |

| Feature | Specification |
|---|---|
| Model | L6 5lines Green Level |
| Size | 128*100*125mm |
| Automatic Leveling | Yes |
| Automatic Adjustment Time | Less than 4 seconds |
| Tilt Angle | Less than 3 degrees |
| Precision | ±3mm at 10m |
| Working Range (200 lux visible) | 25m |
| Continuous Use Time (1.5AH) | Large than 5 hours |
| Continuous Use Time (2.6AH) | Large than 9 hours |
| Waterproof | IP4 / IP5 |
| Dustproof | IP4 / IP5 |
| Anti-drop | 1m (hard floor) |

| Feature | Specification |
|---|---|
| Model | L6 12lines LD Green Level |
| Size | 128*100*125mm |
| Automatic Leveling | Yes |
| Automatic Adjustment Time | Less than 4 seconds |
| Tilt Angle | Less than 3 degrees |
| Precision | ±3mm at 10m |
| Working Range (200 lux visible) | 25m |
| Continuous Use Time (1.5AH) | Large than 5 hours |
| Continuous Use Time (2.6AH) | Not less than 9 hours |
| Waterproof | IP4 / IP5 |
| Dustproof | IP4 / IP5 |
| Anti-drop | 1m (hard floor) |

6. Setup
6.1. Battery Installation
- Open the bottom battery cover of the device.
- Insert two AA batteries, ensuring correct polarity as indicated inside the compartment.
- Close the battery cover securely.
For rechargeable models, ensure the battery is charged before first use. Charge for 2 hours for continuous work for more than 17 hours (L52 series) or up to 25 hours (L6G 1 line open).
6.2. Powering On/Off
Slide the main ON/OFF switch to the right to power on the device. The laser lines will activate. To power off, slide the switch to the left.
6.3. Mounting Options
- Tripod Mounting: The device features a 1/4-20 Tripod Thread at the bottom for mounting on a tripod. This allows for free rotation and adjustment on uneven ground.
- Magnetic Mounting (L52 Series): The L52 series has strong magnets on its base, allowing it to be securely attached to metal surfaces, ensuring vertical and stable positioning.
- Strap Installation (L52 Series): The rear card slot of the L52 series can be equipped with a Velcro strap for easy attachment to pillars or other non-magnetic surfaces.
- Wall/Roof Installation (L62 Series): The L62 series can be installed on a wall or under a roof using a suitable bracket and screws.




7. Operation
7.1. Automatic Self-Leveling Mode
When the device is powered on and placed on a relatively level surface, it will automatically self-level within a tilt angle of 3-4 degrees. The pendulum system will quickly settle, and the laser lines will become stable. If the device is tilted beyond its self-leveling range, the LED indicator and laser lines will flash to alert you.


7.2. Manual Mode (Slanted Line Function)
To project slanted lines for angles beyond the self-leveling range, press the 'Operation Button' (often labeled 'Manual' or with a specific icon) to lock the pendulum. This allows you to fix the laser at any desired angle. The angle can be adjusted freely with the bracket or tripod.


7.3. Brightness Adjustment (L62 Series)
The L62 series offers 3 levels of brightness adjustment through its high-quality optical lens. Use the control panel buttons to cycle through brightness settings to suit indoor or outdoor conditions.

7.4. Battery Indicator
The control panel features intuitive battery display indicators, allowing you to easily monitor the remaining battery life.

8. Maintenance
- Cleaning: Keep the laser window and device housing clean. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in its carry bag in a cool, dry place when not in use. Remove batteries if storing for extended periods.
- Battery Care: For rechargeable models, charge the battery regularly to maintain its lifespan. Avoid overcharging or completely draining the battery.
- Protection: The device has IP54 protection (IP4 waterproof, IP5 dustproof) to prevent liquid and dust from entering. However, avoid exposing it to extreme conditions.

9. Troubleshooting
- Problem: Laser lines are flashing continuously.
- Solution: This indicates the device is outside its self-leveling range. Try to place the laser level on a more even surface. If it continues to flash, ensure the pendulum is not locked if you intend to use auto-leveling mode.
- Problem: Laser lines are dim or not visible.
- Solution: Check the battery level. If low, recharge or replace the batteries. For L62 series, adjust the brightness level. Ensure the working environment is not too bright for the laser visibility.
- Problem: Device does not power on.
- Solution: Check battery installation and ensure batteries are charged or new. Verify the power switch is fully in the 'ON' position.
- Problem: Horizontal and vertical lines cannot be operated separately.
- Solution: For this model, both horizontal and vertical lines are emitted simultaneously in cross laser mode. There is no capability for separate horizontal or separate vertical line projection. It will always be a cross laser light emitted.
10. User Tips
- When using the self-leveling function, ensure the device is placed on a stable surface. The beam should settle quickly once placed horizontally.
- If the battery is low, the LED indicator will flash quickly to remind you to charge or replace the batteries.
- For precise positioning, especially in applications like tile laying or roof construction, utilize the device's high accuracy and visibility.
- The 1/4-20 tripod thread offers versatile mounting options for various tasks.
11. Warranty and Support
Mileseey products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Mileseey website. Keep your purchase receipt as proof of purchase for any warranty claims.