CXG 5000W/8000W

Contents

CXG 5000W/8000W DIY Spot Welder Instruction Manual

Handheld Portable Mini Spot Welding Machine for Battery Welding

1. Introduction

Thank you for choosing the CXG 5000W/8000W DIY Spot Welder. This portable and efficient tool is designed for precise spot welding of nickel strips onto 18650 lithium batteries and other compatible materials. Featuring high power output, a built-in rechargeable battery, and user-friendly controls, it is ideal for various DIY projects and mobile phone battery repairs. Please read this manual thoroughly before operation to ensure safe and optimal performance.

2. Product Overview

The CXG Spot Welder is a compact and powerful device. It comes equipped with pure copper solder pins that are removable and replaceable, ensuring good conductivity and low contact resistance. The unit features a digital display for clear readings and a knob for adjusting the welding current.

8000W Spot Welder Kit

Figure 2.1: The 8000W spot welder kit, including the main unit, foot pedal, power adapter, and nickel strip.

5000W Spot Welder Kit

Figure 2.2: The 5000W spot welder kit with foot pedal and power adapter.

Function Panel Introduction

Figure 2.3: Function Panel Introduction, labeling Foot pedal, Knob adjustment, Indicator light, Charging interface, High-definition digital tube display, Spot welding pen, and ABS shell material.

Video 2.1: Product demonstration showing the spot welder in use, highlighting features like adjustable current, replaceable pins, and strong solder joints.

3. Specifications

FeatureSpecification
Product NameHigh Power Double Pulse Spot Welding Machine
Model Number5000W/8000W
Input Voltage100-240V
Output VoltageApprox. 8.4V (Maximum)
Battery TypeBuilt-in rechargeable lithium battery
Contained Battery Capacity9600mA
Spot Welding Current1200A (Maximum)
Max. Welding Thickness0.1-0.15-0.2-0.25-0.3mm (for nickel tape)
Non-Weldable MaterialsCopper, Aluminum, Gold, Silver
Machine Dimensions150 x 98 x 50 mm (approx. 14*10.2*4.8CM)
Spot Welding Pen LengthApprox. 47 cm (470mm)
Product Weight0.9kg (Total weight including accessories: 900g, machine + pen + foot: 700g)
CertificationCE
Shell MaterialABS
Product Parameter Table

Figure 3.1: Detailed product parameters for the 8000W model.

Product Dimensions Diagram

Figure 3.2: Diagram illustrating the dimensions of the spot welder unit and foot pedal.

4. Package Contents

Ensure all items are present and in good condition upon unpacking:

  • 1 x Spot Welder Host Unit
  • 1 x Foot Switch
  • 2 x Spot Welding Pens (with pure copper solder pins)
  • 1 x Power Adapter/Charger
  • 1 x Frosted Sheet
  • 1 x Trial Nickel Strip (0.1*8mm*2M)
  • 1 x Instruction Manual
Product List Image

Figure 4.1: Image showing the typical contents included in the product package.

5. Setup

  1. Connect Welding Pens: Insert the two spot welding pens into the designated output terminals on the main unit. Ensure they are securely connected.
  2. Connect Foot Switch: Plug the foot switch cable into its corresponding port on the main unit.
  3. Connect Power Adapter: Plug the power adapter into the charging interface on the main unit and then into a suitable power outlet (100-240V compatible). The unit can be used while charging.
  4. Initial Charge: For optimal performance, ensure the built-in lithium battery is fully charged before first use. Do not use if the voltage drops below 7.3V; charge immediately.
8000W High Power Double Pulse Setup

Figure 5.1: Visual guide for connecting the welding pens and foot pedal to the main unit.

6. Operation

  1. Power On: Turn on the spot welder. The digital display will show the current voltage.
  2. Adjust Current: Rotate the knob to adjust the output current according to the thickness of the nickel strip you are welding. Refer to the guidelines below:
    • For 0.1mm nickel strip: Adjust to position 5.
    • For 0.15mm nickel strip: Adjust to position 6.
    • For 0.2mm nickel strip: Adjust to position 8.
    • For 0.25mm nickel strip: Adjust to position 9-10.
    • For 0.3mm nickel strip: Adjust to position 10 (8000W model only).

    Note: Incorrect current adjustment (too high or too low) will affect the welding effect.

  3. Position Workpiece: Place the nickel strip onto the battery terminal or workpiece.
  4. Position Welding Pens: Press the two spot welding pens firmly onto the nickel strip, ensuring good contact with both the strip and the underlying material.
  5. Initiate Weld: Step on the foot switch. The unit will output a current to complete the weld after approximately 0.5 seconds. Release the foot switch once the weld is complete.
  6. Inspect Weld: Check the solder joint for strength and integrity.
Spot Welding Process

Figure 6.1: Close-up demonstration of the spot welding process on 18650 batteries.

Spot Welding Effect

Figure 6.2: Examples of successful spot welds, demonstrating simple operation, solid joints, and integrity.

7. Maintenance

  • Solder Pin Care: If the tip of the soldering pin becomes black or corroded, gently sand it with fine sandpaper to restore good conductivity.
  • Cleaning: Keep the main unit and welding pens clean and free from dust and debris. Use a dry cloth for cleaning.
  • Storage: Store the spot welder in a dry, cool place away from direct sunlight and moisture when not in use.
  • Battery Charging: Regularly charge the battery, especially if the voltage drops below 7.3V, to prolong its lifespan and ensure consistent performance.
Detachable Solder Pins

Figure 7.1: Close-up of the detachable and replaceable pure copper solder pins, which can be maintained or replaced.

8. Troubleshooting

  • Poor Weld Quality:
    • Check if the current setting matches the nickel strip thickness. Adjust as necessary.
    • Ensure the solder pins are clean and have good contact with the nickel strip and workpiece. Sand pins if they are blackened.
    • Verify the battery charge level. A low battery (below 7.3V) can result in weak welds.
  • No Spark/No Weld:
    • Confirm the unit is powered on and the battery is charged.
    • Ensure the welding pens are firmly pressed against the workpiece.
    • Check the foot switch connection and functionality.
  • Overheating/Smoke:
    • If the unit becomes excessively hot or emits smoke, immediately disconnect power. This could indicate an internal fault or improper usage. Allow the unit to cool down completely before attempting further operation.
  • Cannot Weld Certain Materials:
    • This spot welder is specifically designed for nickel strips and similar materials (iron, stainless steel). It cannot spot weld copper, aluminum, gold, or silver.

9. User Tips

  • Practice Makes Perfect: If you are new to spot welding, practice on scrap nickel strips and batteries to find the optimal current settings and pressure for your specific materials.
  • Foot Pedal Control: The foot pedal provides precise control over the welding process, making it easier to achieve consistent results. Ensure you press it firmly and release it after the weld.
  • Voltage Monitoring: Keep an eye on the digital voltage display. If it drops significantly during use or falls below 7.3V, recharge the unit to maintain performance and battery health.
  • Material Compatibility: Remember that this welder is not suitable for copper, aluminum, gold, or silver. Using it on these materials will not produce a successful weld and may damage the unit.

10. Safety Information

  • Always wear appropriate personal protective equipment, including safety glasses, when operating the spot welder.
  • Ensure adequate ventilation in your workspace to disperse any fumes.
  • Do not touch the welding pens or workpiece immediately after welding, as they may be hot.
  • Keep the device away from flammable materials.
  • Do not attempt to disassemble or modify the unit. Refer servicing to qualified personnel.
  • Keep out of reach of children.

11. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.