Navceker ZY-AS13

Contents

Navceker 1x3 Toslink SPDIF Optical Digital Audio Splitter User Manual

Model: ZY-AS13

1. Product Overview

The Navceker ZY-AS13 is a 1x3 Toslink SPDIF Optical Digital Audio Splitter designed to distribute a single optical fiber signal input to three SPDIF/TosLink signal receiving devices. It is a cost-effective solution for home theater, remote teaching, video conferencing, and other audio systems, providing convenience and high-quality audio distribution.

Key Features:

  • One optical fiber signal input split to three SPDIF/TosLink signal receiving devices.
  • Supports audio formats: LPCM2.0/DTS/Dolby-AC3.
  • Supports signal retiming.
  • No loss of audio quality.
  • Easy installation.
  • Requires USB 5V power supply.
  • Over-voltage protection to prevent damage from unmatched power adapters.

Package Contents:

Package contents of the Navceker 1x3 Optical Digital Audio Splitter, including the splitter unit, optical cable, USB power cable, and user manual.
Figure 1: Package Contents (1. Optical Audio Splitter, 2. 1x Optical cable, 3. USB Power cable, 4. User manual)
  • 1 x SPDIF 1x3 Splitter (ZY-AS13)
  • 1 x 5V USB Power Line
  • 1 x Audio Optical Cable
  • 1 x User Manual

2. Device Layout and Connections

Front Panel:

Front view of the Navceker 1x3 Optical Digital Audio Splitter, showing the Micro 5V power input, SPDIF Input, and a Working Indicator light.
Figure 2: Front Panel (Micro 5V Power Input, SPDIF Input, Working Indicator)
  • Micro 5V: Power Input port.
  • SPDIF INPUT: Toslink Input port for the audio source.
  • Working Indicator: LED light indicating device operation.

Rear Panel:

Rear view of the Navceker 1x3 Optical Digital Audio Splitter, showing three SPDIF Output ports labeled 1, 2, and 3.
Figure 3: Rear Panel (Toslink Output 1, Toslink Output 2, Toslink Output 3)
  • SPDIF OUTPUT 1, 2, 3: Toslink Output ports for connecting to audio receiving devices.

3. Setup and Installation

Follow these steps to set up your Navceker 1x3 Toslink SPDIF Optical Digital Audio Splitter:

  1. Connect the Audio Source: Use an optical fiber cable to connect your optical fiber signal source (e.g., Blu-ray player, computer, HDTV, PS4, Xbox, DVD Player, TV Box) to the SPDIF INPUT port on the splitter.
  2. Connect Audio Receiving Devices: Use optical cables to connect the SPDIF OUTPUT 1, 2, and 3 ports on the splitter to your optical fiber signal receiving devices (e.g., amplifier, soundbar, headphones, 5.1 speaker system).
  3. Power the Splitter: Connect the provided USB power line to the Micro 5V input port on the splitter and plug the other end into a suitable USB power source (e.g., a USB wall adapter, TV USB port, or computer USB port).
Connection diagram showing an HDTV, PS4, Xbox, and DVD Player as input sources, connected to the SPDIF & Audio 1x3 Splitter, which then outputs to a Soundbar, Amplifier, and Headphone simultaneously.
Figure 4: Typical Connection Diagram
Application scenario showing a TV connected to the SPDIF & Audio 1x3 Splitter, which then outputs to two stereo speakers, demonstrating simultaneous audio output.
Figure 5: Example Application with TV and Speakers

Video Guide:

Video 1: Product demonstration showing connection and audio output.

4. Operating Instructions

Once all connections are made and the splitter is powered on, the Working Indicator LED will illuminate. The splitter will automatically distribute the incoming optical audio signal to all three output ports simultaneously. No further configuration is typically required.

Audio Quality:

Diagram illustrating HIFI hi-fi lossless sound quality synchronous transmission, with sound waves emanating from the SPDIF OUTPUT ports.
Figure 6: HIFI Lossless Sound Quality

The Navceker ZY-AS13 ensures lossless digital audio transmission, maintaining high-fidelity sound quality across all connected output devices. It supports various audio formats including LPCM 2.0, DTS, and Dolby-AC3, providing clear audio without noise.

5. Maintenance

To ensure the longevity and optimal performance of your optical digital audio splitter, please observe the following maintenance guidelines:

  • Cleaning: Keep the device and its ports free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners directly on the device.
  • Cable Care: Optical fiber cables are delicate. Avoid bending them sharply or placing heavy objects on them, as this can damage the internal fiber and degrade signal quality.
  • Power Supply: Always use the provided USB power cable and a compatible 5V DC power source. Using an incorrect power adapter may damage the device.
  • Environment: Operate the splitter within the specified temperature and humidity ranges to prevent malfunction. Avoid exposing the device to extreme temperatures or high moisture.

6. Troubleshooting

If you encounter issues with your Navceker 1x3 Toslink SPDIF Optical Digital Audio Splitter, refer to the following common troubleshooting steps:

No Audio Output:

  • Check Power: Ensure the splitter is properly powered via the Micro 5V USB port and the Working Indicator light is on.
  • Verify Connections: Confirm that all optical cables are securely connected to the input and output ports of the splitter and your audio devices. Ensure the optical cables are not damaged or sharply bent.
  • Source Device Settings: Check the audio output settings on your source device (e.g., TV, console, Blu-ray player). Make sure the audio output is set to 'PCM' or 'Bitstream' (depending on your receiving device's capabilities) and that the optical output is enabled.
  • Receiving Device Settings: Ensure your amplifier, soundbar, or headphones are correctly configured to receive audio from their optical input.
  • Cable Quality: Use high-quality optical fiber cables with a loss of less than 0.2Db/m for optimal performance, especially for longer distances (up to 40m).

Poor Audio Quality or Intermittent Sound:

  • Cable Integrity: Inspect optical cables for any visible damage, kinks, or sharp bends. Replace damaged cables.
  • Dust in Ports: Gently clean the optical ports on the splitter and connected devices using a suitable optical cleaning tool or compressed air. Dust can interfere with the optical signal.
  • Power Stability: Ensure the USB power source provides stable 5V power. Try a different USB port or power adapter if suspected.

Device Not Powering On:

  • Power Connection: Double-check the USB power cable connection to the splitter and the power source.
  • Power Source: Test the USB power source with another device to confirm it is functional.
  • Cable Fault: Try a different USB power cable if available.

7. Specifications

FeatureSpecification
Model NumberZY-AS13
TypeOptical Fiber Cables
Connector AMicro USB, OPTICAL INTERFACE
Connector BOPTICAL INTERFACE
Audio Format SupportLPCM2.0/DTS/Dolby-AC3
Peak Wavelength650nm
Max Baud Rate16Mbps
Output Cable Distance<=40m (using optical fiber cable loss < 0.2Db/m)
Max Working Current100mA
Power Adapter FormatInput: AC (50HZ, 60HZ) 100V-240V; Output: DC5V
Operating Temperature Range0℃ to +40℃
Operating Humidity Range5 to 90%RH (No Condensation)
Dimensions (L x W x H)62 x 58 x 24 mm
Outer Diameter (cable)1mm
ShieldingNon-Shielded
ApplicationProjector, DVD Player, For iPod, Camera, Computer, Multimedia, Monitor, TV box, MP3 / MP4 Player, Television, LCD, XBox, Apple TV
CertificationCE, FCC, RoHS

8. User Tips

  • Simultaneous Output: This splitter is ideal for connecting multiple audio output devices like soundbars, amplifiers, and headphones to a single optical audio source. For example, you can connect your TV's optical output to the splitter and then connect an Echo Studio, a soundbar, and an amplifier to the splitter's outputs to enjoy audio on all devices simultaneously.
  • Audio Format Compatibility: Ensure your receiving devices (e.g., soundbar, amplifier) support the audio format being sent by your source (LPCM 2.0, DTS, or Dolby-AC3) for proper sound reproduction.
  • Cable Length: While the splitter supports output distances up to 40m, using shorter, high-quality optical cables can help minimize potential signal degradation.

9. Warranty and Support

The Navceker 1x3 Toslink SPDIF Optical Digital Audio Splitter comes with a one-year free warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided with your purchase or on the manufacturer's official website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.