1. Introduction
The ESCAM G20 is a 1080P Full HD 4G SIM Camera designed for versatile surveillance. Featuring a rechargeable battery, PIR motion detection, and two-way audio, it offers reliable monitoring both indoors and outdoors without the need for Wi-Fi. This manual provides detailed instructions for setting up, operating, and maintaining your camera.
2. Package Contents
Ensure all items are present in the box:
- IP Camera (ESCAM G20) x 1
- Product Bracket x 1
- USB Cable x 1
- Quick Start Guide x 1
- Screw Kit x 1
3. Product Overview
Familiarize yourself with the components of your ESCAM G20 camera:
Key components include:
- Photosensitive Sensor: Detects ambient light for automatic day/night mode switching.
- 3.6mm Lens: Captures 1080P Full HD video.
- Microphone: For audio input and two-way communication.
- PIR Sensor: Passive Infrared sensor for motion detection.
- SIM Card Slot: For inserting a 4G SIM card to enable cellular connectivity.
- ON/OFF Button: Powers the camera on or off.
- USB Interface (DC 5V): For charging the battery (Micro-USB type).
- Reset Button: To reset the camera to factory settings.
- TF Card Slot: Supports Micro SD card storage up to 128GB.
- Speaker: For audio output and two-way communication.
4. Setup Guide
4.1 Initial Charging
Before first use, fully charge the camera using the provided USB cable and a 5V power adapter. The USB interface is located on the rear of the camera.
4.2 Inserting SIM Card and TF Card
- Locate the SIM Card Slot and TF Card Slot on the rear of the camera (refer to Figure 3).
- Carefully insert a 4G SIM card into the SIM Card Slot. Ensure it is correctly oriented.
- Insert a Micro SD card (up to 128GB) into the TF Card Slot for local video storage.
4.3 Powering On
Press and hold the ON/OFF button to power on the camera.
4.4 App Installation and Connection
Download the dedicated mobile application (App name is not specified in product details, please refer to the Quick Start Guide for the exact app name and QR code if available) on your Android or iOS device. Follow the in-app instructions to add and connect your ESCAM G20 camera. The camera supports remote viewing via 4G without Wi-Fi.
5. Operation
5.1 Remote Viewing (4G Connectivity)
The ESCAM G20 supports 4G SIM cards, allowing you to monitor your premises remotely from anywhere with 4G signal coverage, even without Wi-Fi. Use the mobile app to access the live feed.
5.2 PIR Motion Detection and Alarm
The camera features a German import PIR induction alarm. When motion is detected, the camera will push accurate alarm notifications to your mobile app and can initiate recording. The advanced algorithm helps reduce false reports.
5.3 Two-Way Audio
With a built-in microphone and high-quality speaker, the camera enables real-time remote video voice intercom. You can talk online between the camera and your mobile phone through the app.
5.4 Day/Night Vision
The camera is equipped with an ICR double filter for automatic color to black switching and a built-in low-power infrared lamp. This effectively improves night vision sharpness, providing clear images up to 10 meters in low-light conditions.
5.5 Video Recording and Storage
The camera supports recording based on incoming alarms or continuous all-weather recording. Video footage is stored on a Micro SD card (up to 128GB) inserted into the TF card slot.
6. Maintenance
6.1 Battery Management
The ESCAM G20 is powered by a 6200mAh polymer lithium battery, offering ultra-low power consumption. It provides a standby time of approximately 25 days (pure standby) and can record continuously for about 30 hours. Recharge the battery using the provided USB cable and a 5V adapter when the battery level is low.
The camera also supports connection to a 5W solar panel for continuous charging (solar panel not included).
6.2 Storage Management
Regularly check the storage capacity of your Micro SD card. If the card is full, older recordings may be overwritten, or recording may stop. Back up important footage and consider formatting the card periodically for optimal performance.
6.3 Cleaning
Wipe the camera lens and body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the device.
7. Troubleshooting
- Camera not powering on: Ensure the battery is fully charged.
- No 4G signal: Verify that the SIM card is correctly inserted and active. Check 4G signal strength in the camera's location.
- Camera not sending motion notifications:
- Check app settings to ensure notifications are enabled.
- Verify PIR sensitivity settings in the app.
- Ensure the camera has a stable 4G connection.
- Unable to connect to the app:
- Ensure the camera is powered on.
- Check your phone's internet connection.
- Try resetting the camera using the reset button (refer to Figure 3) and re-pairing it with the app.
- Poor night vision: Ensure the camera lens is clean and there are no obstructions blocking the infrared lights.
8. Specifications
| Feature | Specification |
|---|---|
| Model | ESCAM G20 |
| Image Sensor | 1/3" CMOS |
| Resolution | 1080P (Full-HD), 2MP |
| Video Compression | H.264, supports dual code flow |
| Frame Rate | 25 Frames |
| Lens | 3.6mm |
| Viewing Angle | 75° |
| Night Vision | 10pcs IR LED, IR-cut Double Filter, 10m IR distance |
| Minimum Illumination | Color 0.6 lux@f1.2, B/W 0.08 lux@f1.2 |
| 4G Connection | TD-LTE, TD-LTE / LTE FDD, TD-LTE / LTE-FDD |
| Audio | Built-in mic (input), Built-in speaker (output), G711A coding |
| Storage | Micro SD card (Max 128GB) |
| Motion Detection | PIR Induction Alarm (Smart Tracking) |
| Battery | 6200 mAh Polymer Lithium Battery, 5V charge voltage |
| Standby Time | Approx. 25 days (pure standby), 30 hours continuous recording |
| Power Mode | Battery Powered, supports 5W Solar Panel Power (optional) |
| Operating Temperature | -10°C to 60°C |
| Operating Humidity | 20%~85% (non-condensation) |
| Supported Mobile Systems | Android, iOS |
| Installation | Normal (Indoor and outdoor) |
| Product Dimensions | 95 x 48 x 48mm |
| Product Weight | 0.2kg |
| Shell Material | Metal |
| Certification | CE |
9. User Tips
- Versatile Placement: This camera is suitable for both indoor and outdoor use, offering flexibility in surveillance locations.
- Off-Grid Monitoring: The 4G SIM card functionality allows the camera to operate in areas without Wi-Fi, making it ideal for remote monitoring in locations like forests or vehicles.
- PIR Detection Range: The PIR sensor can detect human movement from a distance of approximately 15 meters. Position the camera strategically to maximize detection effectiveness.
- Charging Options: While the camera has a long-lasting internal battery, consider connecting an external 5W solar panel for continuous power, especially in outdoor installations where power outlets are scarce.
- Motion Notification Issues: If you experience problems with motion notifications, double-check the app settings for notification preferences and PIR sensitivity. A stable 4G connection is crucial for timely alerts.
10. Warranty and Support
For warranty information and technical support, please refer to the contact details provided in your Quick Start Guide or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
