1. Introduction
This manual provides comprehensive instructions for the setup, programming, operation, and maintenance of your Scimagic-RC ROGER compatible remote control duplicator. This device is designed to copy the fixed code signals from your existing ROGER gate or garage door remote controls operating at 433MHz (433.92MHz).
Important Note: This duplicator requires a functional original remote control to copy its code. It cannot generate new codes if the original remote is lost or non-functional.
2. Product Overview and Components
Your package includes:
- 1 x Remote Control Duplicator
- 1 x 12V / 27A Battery (pre-installed or included separately)
- 1 x Keychain
- 1 x English Manual
The remote control duplicator features a durable design, typically with four channels (buttons A, B, C, D) for various functions. Some models include a slideable lid for button protection.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Scimagic-RC |
| Model Number | ROGER |
| Origin | Mainland China |
| Certification | CE |
| Frequency | 433MHz / 433.92MHz |
| Material | Metal and PVC |
| Transmission Distance | 30-100 meters (open space) |
| Voltage | 12V |
| Buttons | 4 |
| Wireless Communication | RF |
| Code Type | Fixed code |
| Compatible Modes | ROGER E80 TX54R, ROGER TX22, ROGER H80, ROGER E80 TX52R |
4. Setup and Programming
Follow these steps carefully to program your new remote control duplicator from your original ROGER transmitter.
Step 1: Clear the History Code from the Duplicator
- Press and hold buttons A and B simultaneously on the duplicator until the LED flashes three times.
- Release button B (while continuing to hold button A).
- Press button B slowly three times. The LED will flash three times again.
- Release button A. The code clearance is now complete.
Step 2: Copy Code from the Original Remote Control
- Place the duplicator and your original ROGER transmitter as close to each other as possible.
- Press and hold button A on your original transmitter.
- While still holding button A on the original transmitter, press and hold button A on the duplicator. Continue holding both buttons until you see the duplicator's LED flash rapidly.
- Release both buttons. The code for button A is now copied.
- Repeat this process for any other buttons (B, C, D) you wish to program, using the corresponding buttons on both the original and duplicator remotes.
If you encounter difficulties during the copying process, please be patient and repeat the steps. Ensure both remotes are very close during the copying procedure.
5. Operating Instructions
Once programmed, your duplicator remote functions identically to your original ROGER remote. Simply press the corresponding button (A, B, C, or D) to activate the desired function of your gate or garage door opener.
- Button A: Typically functions as the lock button.
- Button B: Typically functions as the unlock button.
- Buttons C & D: Can be programmed for additional functions as per your original remote's capabilities.
6. Maintenance
Battery Replacement
The remote control uses a 12V / 27A battery. When the remote's range decreases or the LED indicator becomes dim, it's time to replace the battery. To replace:
- Carefully open the remote control casing.
- Remove the old 12V / 27A battery.
- Insert a new 12V / 27A battery, ensuring correct polarity.
- Close the remote control casing securely.
General Care
To ensure a long service life for your remote control:
- Keep the remote dry and away from moisture.
- Avoid dropping or subjecting the remote to strong impacts.
- Some models come with a slideable lid to protect the keys from dust and damage. Utilize this feature for extended durability.
7. Troubleshooting
- Programming Failure: If the remote does not program successfully, ensure your original remote is functional and that both remotes are placed very close to each other during the copying process. Repeat the programming steps carefully.
- Incompatibility: Verify that your original remote control's image matches the compatible models shown in the product description. If you are unsure, it is recommended to send a photo of your original remote to the seller for verification before purchase.
- Reduced Range: A reduced operating range typically indicates a low battery. Replace the 12V / 27A battery.
8. User Tips
- Always ensure your original remote is working correctly before attempting to duplicate it.
- For best results during programming, perform the steps in a quiet environment away from other RF interference.
- Consider purchasing a car sun visor clip for convenient access to your remote while driving.
9. Manufacturer Information
Manufacturer: Shenzhen Scimagic Development Technology Co.Ltd
Address: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District Shenzhen Guangdong China.
For further assistance or detailed guides, please refer to the official user manual PDF available here.
