1. Introduction
The QIACHIP KR2201W Smart Switch is a versatile home automation module designed to control lighting and other appliances. It supports both RF 433MHz wireless remote control and Wi-Fi connectivity, allowing control via the Smart Life/Tuya app, Amazon Alexa, and Google Assistant. This manual provides detailed instructions for safe installation, setup, and operation of your smart switch.
2. Safety Warnings
- This device is for indoor use only.
- Do not expose this device to dripping or splashing water or any other dangerous sources.
- This device should only be installed by adults.
- Do not install near any heat sources.
- Do not use this device with dimmers.
- Do not use this device in totally enclosed luminaires. Use this device in open luminaires only.
- If this device is much heavier than the one to be replaced, the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
- RISK OF ELECTRIC SHOCK: USE IN DRY LOCATIONS ONLY. Do not install this device with wet hands.
- Always turn off power before installation or wiring.
3. Product Overview
The QIACHIP KR2201W Smart Switch is a compact module designed for integration into your existing electrical system. It features both Wi-Fi and RF 433MHz capabilities for flexible control.

Figure 1: Dimensions of the Smart Switch module (82mm/3.19inch length, 42mm/1.64inch width, 26mm/1.01inch height).
Internal Components

Figure 2: Internal Component Diagram
- Power inductor
- RF antenna
- Electrolytic capacitor
- High power relay
- Indicator light
- Pair of code KEY (Settings Button)
- Quality fuse
- Terminal block
- Tuya wifi module
- RF receiving module
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | KR2201W Wifi +RF receiver |
| Input Voltage | AC 90-250V (50/60Hz) |
| Max Current | 10A |
| Max Output Power (Resistive Load) | 2200W (AC220V) |
| Max Output Power (Incandescent Lamp) | 2200W (AC220V) |
| Max Output Power (Inductive Load) | 500W (AC220V) |
| Max Output Power (Capacitive Load) | 200W (AC220V) |
| Max Output Power (Energy-saving Lamp) | 300W (AC220V) |
| Max Output Power (LED Lamp) | 300W |
| RF Working Frequency | 433.92MHz |
| RF Remote Control Distance | Open area greater than 25 meters |
| Wireless Standard | IEEE 802.11 b/g/n |
| Wi-Fi Frequency | 2.4GHz only |
| Communication Method | RF, Wi-Fi |
| State of Assembly | Almost Ready |
| Compatibility | All Compatible (IOS, Android, Alexa, Nest) |
| Certification | CE |
5. Installation
Wiring Diagram
Before wiring, ensure the main power supply is turned OFF at the circuit breaker to prevent electric shock. Connect the smart switch according to the diagram below. The input terminals are for AC 90-250V power, and the output terminals connect to your light fixture.

Figure 3: Wiring Diagram. Connect L (Live) and N (Neutral) from AC power to the input, and L (Live) and N (Neutral) to the light fixture output. Do not wire with electricity.
*Important: Do not install with electricity. Ensure all connections are secure before restoring power.
6. RF Remote Control Setup
The red indicator light on the smart switch indicates it has entered RF pairing mode. This device is compatible with QIACHIP brand RF remote controls (transmitters). Compatibility with other brands is not guaranteed.
Video 1: Demonstration of RF pairing and clearing signals with the smart switch and a remote control.
Manual Switch Mode
Without a remote control, press the "Settings Button" on the smart switch once to turn it ON, and press it again to turn it OFF.
Pairing Modes:
6.1. Latch Mode (Self-locking)
In this mode, one press of the remote button turns the device ON, and another press of the same button turns it OFF. This is suitable for controlling one smart switch with one remote button.
- Press the "Settings Button" on the smart switch twice quickly. The red indicator light will flash and then stay ON.
- Press the desired button on your RF remote control. The red indicator light will flash and then turn OFF.
- The latch mode is now successfully set.
6.2. Toggle Mode (Interlocking)
This mode requires at least two remote buttons. One button turns the device ON, and another different button turns it OFF. This is suitable for controlling multiple smart switches with a single remote.
- Press the "Settings Button" on the smart switch three times quickly. The red indicator light will flash and then stay ON.
- Press the remote button you want to assign as "ON". The red indicator light will flash.
- Immediately press the remote button you want to assign as "OFF". The red indicator light will flash and then turn OFF.
- The toggle mode is now successfully set.
6.3. Momentary Mode (Jog Mode)
In this mode, the device turns ON only while the remote button is pressed and turns OFF when the button is released.
- Press the "Settings Button" on the smart switch four times quickly. The red indicator light will flash and then stay ON.
- Press the desired button on your RF remote control. The red indicator light will flash and then turn OFF.
- The momentary mode is now successfully set.
Reset RF Pairing (Clear Signal)
To clear all paired RF remote controls from the smart switch's memory:
- Press the "Settings Button" on the smart switch eight times quickly.
- The red indicator light will flash, indicating that all RF pairing data has been cleared.
7. Wi-Fi and App Setup (Smart Life/Tuya App)
The green indicator light on the smart switch indicates it is in Wi-Fi pairing mode. The Smart Switch works with the "Smart Life" or "Tuya Smart" app.
7.1. Preparation
- Ensure your phone is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported).
- Turn on your phone's Bluetooth and location services.
- Keep the smart switch, your mobile phone, and your Wi-Fi router close to each other during setup.
7.2. Download and Install the App
Search for "Smart Life" or "Tuya Smart" in your phone's App Store (iOS) or Google Play Store (Android), or scan the QR code below to download and install the app.

Figure 4: Smart Life App download QR code and connection steps.
- If you are a first-time user, click "Create New Account" to register.
- If you already have an account, click "Log in with an existing account".
7.3. Reset Smart Switch for Wi-Fi Pairing
Press and hold the "Settings Button" on the smart switch for more than 6 seconds until the green LED indicator flashes quickly. This indicates the device is ready for Wi-Fi pairing.
7.4. Add Device in App
- Open the "Smart Life" app.
- Click the "+" icon in the upper right corner to enter the device addition page.
- Select "Auto Scan" (ensure Bluetooth is enabled on your phone). The app will search for nearby devices.
- Once the smart switch is discovered, its icon and name will appear in the app. Follow the on-screen prompts to add the device.
- You will be prompted to enter your 2.4GHz Wi-Fi password. Enter it and confirm.
- Once successfully connected, the green LED indicator on the smart switch will remain ON.
8. Smart Assistant Integration (Alexa & Google Assistant)
To control your smart switch using voice commands with Amazon Alexa or Google Assistant, you need to link your Smart Life/Tuya account to your smart assistant app.

Figure 5: Voice control with Amazon Alexa and Google Assistant.
- First, ensure your smart switch is successfully added to the Smart Life/Tuya app.
- Open your Amazon Alexa or Google Home app.
- Navigate to the "Skills & Games" (Alexa) or "Works with Google" (Google Home) section.
- Search for "Smart Life" or "Tuya Smart" and enable the skill/service.
- Log in with your Smart Life/Tuya app account credentials when prompted.
- Once linked, discover devices in your smart assistant app. Your QIACHIP Smart Switch should appear.
- You can now use voice commands like "Alexa, turn on the light" or "Hey Google, turn off the light."
9. Operating Modes and App Features
Once connected to the Smart Life/Tuya app, you can utilize various features for enhanced control and automation.
9.1. App Remote Control

Figure 6: App Remote Control. Control your appliance anytime, anywhere with a Wi-Fi signal.
Control your connected appliances remotely from anywhere with an internet connection using the Smart Life/Tuya app.
9.2. Timing Function

Figure 7: Timing Function. Set schedules to turn devices ON/OFF automatically.
Set schedules for your devices to turn ON or OFF at specific times, such as turning on lights in the evening or scheduling appliance operation.
9.3. Countdown Function

Figure 8: Countdown Function. Set a timer for devices to turn off after a specified duration.
Use the countdown timer to automatically turn off devices after a set period, useful for tasks like humidifying, cooking, or turning off lights.
9.4. Restart State Memory

Figure 9: 3 Kinds of Restart State. Configure the device's behavior after a power outage.
Configure the smart switch to remember its last state (ON/OFF) after a power outage, or set it to always turn ON or OFF when power is restored.
9.5. Family Sharing Control

Figure 10: Family Sharing Control. Share device control with multiple family members.
Share control of your smart devices with family members through the app, allowing multiple users to manage the smart home system.
10. User Tips
- For optimal RF performance, ensure the remote control battery is fresh. Low battery can reduce the control range.
- When setting up Wi-Fi, keep the smart switch close to your router and phone to ensure a stable connection.
- If experiencing issues with RF pairing, try clearing the signal (reset) and re-pairing.
- Remember that the device only supports 2.4GHz Wi-Fi networks.
11. Troubleshooting
- Device not responding to RF remote:
- Check if the remote control battery is low and replace if necessary.
- Ensure the smart switch and remote are within the effective range (open area > 25 meters).
- Verify that the remote is a QIACHIP brand RF remote.
- Try clearing the RF signal (press "Settings Button" 8 times) and re-pairing the remote.
- Unable to connect to Wi-Fi:
- Confirm your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Ensure your phone's Bluetooth and location services are enabled.
- Make sure the smart switch's green LED is flashing quickly (Wi-Fi pairing mode). If not, reset it by holding the "Settings Button" for 6+ seconds.
- Keep the device, phone, and router close during the pairing process.
- Double-check your Wi-Fi password.
- Restart your router and try again.
- Voice control not working:
- Ensure the smart switch is successfully connected and controllable via the Smart Life/Tuya app.
- Verify that the Smart Life/Tuya skill/service is enabled and linked correctly in your Amazon Alexa or Google Home app.
- Check your internet connection.
- Try re-discovering devices in your smart assistant app.
- Interference issues:
- Avoid placing the smart switch near large metal objects, other electronic devices, or strong electromagnetic fields, as these can interfere with wireless signals.
12. Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the device is kept in a dry environment.
- Regularly check wiring connections for any signs of wear or damage.
- Avoid abnormal use, as it can reduce the product's performance and lifespan, and may cause damage or safety hazards.
13. Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official QIACHIP documentation or contact customer service.
A comprehensive user manual in PDF format can be found at: QIACHIP Smart Switch User Manual (PDF).