Hikvision DS-KH9510-WTE1 (B)

Contents

Hikvision DS-KH9510-WTE1 (B) Video Intercom Android Indoor Station User Manual

Model: DS-KH9510-WTE1 (B) | Brand: Hikvision

1. Introduction

This manual provides detailed instructions for the installation, configuration, operation, and maintenance of your Hikvision DS-KH9510-WTE1 (B) Video Intercom Android Indoor Station. Please read this manual thoroughly before using the device to ensure proper and safe operation. The (B) in the model number indicates a specific version or revision of the product.

Front view of the Hikvision DS-KH9510-WTE1 (B) Indoor Station

Figure 1: Hikvision DS-KH9510-WTE1 (B) Indoor Station Front View

2. Key Features

The Hikvision DS-KH9510-WTE1 (B) Indoor Station offers advanced functionality for your video intercom system:

  • 10.1-inch colorful IPS touch screen with a resolution of 1024 × 600.
  • Supports Android app installation, providing an open platform for third-party software integration.
  • Enables video intercom and live view functionality on your mobile phone throughout the day.
  • Built-in Hik-Connect for comprehensive all-in-one management.
  • Functions as a wireless intrusion panel for on-site security management.
  • Receives 7 seconds of video verification from alarm systems for enhanced security.
Diagram detailing key features and physical interface components of the DS-KH9510-WTE1 (B)

Figure 2: Key Features and Physical Interface Overview

3. Package Contents

Upon unpacking, please verify that all items are present and in good condition. The standard package typically includes:

  • Hikvision DS-KH9510-WTE1 (B) Indoor Station
  • Mounting bracket and screws
  • Quick Start Guide / User Manual (this document)
  • Power adapter (if not using PoE)
Packaging box for the Hikvision Indoor Station

Figure 3: Product Packaging

4. Physical Interface

Familiarize yourself with the various ports and components of the indoor station:

  1. Screen
  2. Microphone
  3. Unlock Button
  4. Power Supply Interface
  5. Alarm Terminals
  6. RS-485/Relay Interface
  7. Debugging Port
  8. microUSB Interface
  9. Loudspeaker
  10. Reserved
  11. TAMPER
  12. Network Interface
Rear view of the Hikvision DS-KH9510-WTE1 (B) Indoor Station showing ports and mounting points

Figure 4: Rear View with Interfaces

5. Setup

5.1 Installation

  1. Choose Location: Select a suitable indoor location, preferably near a network connection (Ethernet or Wi-Fi coverage) and a power source (if not using PoE). The device is designed for surface mounting.
  2. Mounting: Secure the mounting bracket to the wall using appropriate screws. Ensure the bracket is level and firmly attached.
  3. Wiring: Connect necessary cables to the physical interfaces on the back of the indoor station. This may include:
    • Network Cable: Connect an Ethernet cable to the Network Interface (1 RJ-45 10/100 Mbps self-adaptive) for wired network access or ensure strong Wi-Fi signal.
    • Power Supply: Connect a 12 VDC, 1 A power adapter to the Power Supply Interface, or connect to a standard IEEE802.3af Power over Ethernet (PoE) switch/injector via the network cable.
    • Alarm Terminals: Connect external alarm devices to the Alarm Terminals (8 inputs, 1 relay output, 1 alarm output) as required.
    • RS-485/Relay Interface: Connect to compatible devices if needed.
  4. Attach Device: Carefully attach the indoor station to the mounted bracket, ensuring it clicks securely into place.

5.2 Initial Power-Up and Configuration

  1. Power On: Once all connections are secure, apply power to the device. The screen should light up.
  2. Language Selection: Follow the on-screen prompts to select your preferred language. The device supports multiple languages including English, French, Spanish, German, Italian, and more.
  3. Network Settings: Configure network settings (Wi-Fi or wired) as prompted. For Wi-Fi, select your network and enter the password.
  4. System Setup: Complete the initial system setup, which may include setting the date, time, and administrator password.
  5. Hik-Connect Integration: Integrate the device with Hik-Connect for remote management and mobile app functionality. Follow the instructions provided by the Hik-Connect application.

6. Operating Instructions

6.1 Basic Operation

  • Touch Screen: Navigate the interface using the 10.1-inch capacitive touch screen.
  • Answering Calls: When an outdoor station calls, the screen will display the caller's video. Tap the 'Answer' icon to communicate.
  • Unlocking Doors: During a call or from the main interface, tap the 'Unlock' button (physical button or on-screen icon) to open a connected door.
  • Live View: Access live video feeds from connected outdoor stations or IP cameras through the interface.
  • Messages: Check for any recorded messages or notifications.

6.2 App Management

The Android operating system allows for the installation of various applications. You can manage installed apps, download new ones, and integrate third-party software as needed.

6.3 Wireless Intrusion Panel

Utilize the indoor station as a wireless intrusion panel to manage and monitor connected alarm systems and sensors.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Updates can typically be managed through the system settings or Hik-Connect app.
  • Environmental Conditions: Ensure the device operates within the specified working temperature range of -10 °C to 50 °C (14 °F to 122 °F) and humidity of 10% to 90%.
  • Backup: Periodically back up important settings or data if applicable.

8. Troubleshooting

  • No Power: Check power connections. If using PoE, ensure the PoE switch/injector is functioning correctly. If using a power adapter, verify it's properly connected and the outlet has power.
  • No Network Connection: Verify the Ethernet cable is securely connected or that the Wi-Fi signal is strong and the password is correct. Restart the device and your router/switch.
  • No Video/Audio: Ensure all connected outdoor stations or cameras are powered on and properly configured. Check network connectivity.
  • Touch Screen Unresponsive: Try restarting the device. If the issue persists, contact support.
  • App Installation Issues: Ensure the device has sufficient storage (8 GB eMMC ROM) and RAM (2 GB). Check network connectivity for downloads.

9. Specifications

CategoryParameterValue
System ParametersOperating SystemEmbedded Android operation system
ROM8 GB eMMC
RAM2 GB
CPUEmbedded processor
Display ParametersScreen Size10.1-inch
Operation MethodCapacitive touch screen
TypeColorful IPS
Resolution1024 × 600
Audio ParametersAudio InputBuilt-in omnidirectional microphone
Audio OutputBuilt-in loudspeaker
Audio Compression Bitrate64 Kbps
Audio QualityNoise suppression and echo cancellation
CapacityEvent Capacity200
Notice Capacity16
Linked Indoor Extensions5
Network ParametersCommunication ProtocolTCP/IP, SIP, RTSP
Wired NetworkSupport
Wi-Fi Standard802.11 b/g/n
Device InterfacesAlarm Input8
Network Interface1 RJ-45 10/100 Mbps self-adaptive
TAMPER1
RS-4851
TF CardReserved
Alarm Output1 relay output, 1 alarm output
GeneralInstallationSurface mounting
Weight (without package)875 g
Weight (with package)1060 g
Working Temperature-10 °C to 50 °C (14 °F to 122 °F)
Working Humidity10% to 90%
Dimensions (L × W × H)254 mm × 166 mm × 26.65 mm (10.0" × 6.54" × 1.05")
PowerPower Supply12 VDC, 1 A; IEEE802.3af Standard PoE
Power Consumption≤ 8 W
LanguageSupported LanguagesEnglish, French, Portuguese (Brazil), Spanish, Russian, German, Italian, Polish, Arabic, Turkish, Vietnamese, Hungarian, Dutch, Romanian, Czech, Bulgarian, Ukrainian, Croatian, Serbian, Greek, Norwegian, Danish
ModelAvailable ModelDS-KH9510-WTE1(B)
Table of detailed technical specifications and a dimension diagram for the DS-KH9510-WTE1 (B)

Figure 5: Detailed Specifications and Dimensions

10. User Tips

  • Language Support: The device supports a wide range of languages, including English, which can be selected during initial setup or in the system settings.
  • Third-Party Apps: Leverage the Android operating system and open platform to install compatible third-party applications, such as Home Assistant, to expand the functionality of your smart home ecosystem.
  • PoE for Simplified Installation: Utilize Power over Ethernet (PoE) capability to simplify installation by delivering both power and data over a single Ethernet cable, reducing wiring complexity.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Hikvision website or contact your authorized Hikvision dealer. Keep your purchase receipt as proof of purchase for warranty claims.

© 2023 Hikvision. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.