cayin CS-150A

Contents

Cayin CS-150A Tungsol KT150 High Power Vacuum Tube Integrated Amplifier User Manual

Model: CS-150A

1. Introduction

The Cayin CS-150A is a high-power integrated vacuum tube amplifier designed to deliver exceptional audio performance. Featuring Tungsol KT150 power tubes, it offers both Triode and Ultralinear operation modes, allowing users to tailor the sound to their preferences. This manual provides essential information for the safe and optimal use of your CS-150A amplifier, including setup, operation, maintenance, and specifications.

2. Safety Information

Please read and understand all safety instructions before operating the amplifier. Keep this manual for future reference.

  • Electrical Safety: Always connect the amplifier to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect the power cord before cleaning or servicing.
  • Heat: Vacuum tubes generate significant heat. Ensure adequate ventilation around the amplifier. Do not place objects on top of the unit that could obstruct airflow.
  • Tubes: Tubes are fragile and can be hot. Avoid touching them during operation or immediately after shutdown. Allow sufficient cooling time before handling.
  • Servicing: Do not attempt to service the amplifier yourself. Refer all servicing to qualified personnel. Opening the chassis exposes you to dangerous voltages.
  • Placement: Place the amplifier on a stable, level surface away from direct sunlight, heat sources, and strong electromagnetic fields.

3. Package Contents

Carefully unpack the amplifier and check for the following items:

  • Cayin CS-150A Integrated Vacuum Tube Amplifier
  • Remote Control
  • Power Cord
  • Protective Tube Cage
  • User Manual (this document)

If any items are missing or damaged, please contact your dealer immediately.

4. Product Overview

4.1 Front Panel

Front view of the Cayin CS-150A amplifier
Figure 4.1: Front view of the Cayin CS-150A amplifier, showcasing the vacuum tubes, volume knob, input selector, and various switches.
  • Power Switch: Turns the amplifier ON or OFF.
  • TR/UL Switch: Selects between Triode and Ultralinear operation modes.
  • BIAS Switch: Adjusts the BIAS level (HIGH/STANDARD) for optimal tube performance.
  • NFB Switch: Selects between two levels of Negative Feedback (HIGH/LOW) to alter sound output.
  • Volume Knob: Controls the overall output volume.
  • Input Selector Knob: Selects the desired audio input source (AUX, LINE1, LINE2, PRE-IN).
  • BIAS Meter: Displays the BIAS level, allowing for easy monitoring and adjustment.
  • Input Indicators: LEDs indicating the currently selected input source.
  • Vacuum Tubes: Visible on the top panel, including Tungsol KT150, Tungsol 6SN7GTB, and RCA 22DE4.
Close-up of BIAS Level Selector and Negative Feedback (NFB) switches
Figure 4.2: Detail of the BIAS Level Selector and Negative Feedback (NFB) switches on the front panel.
Close-up of the external BIAS meter
Figure 4.3: Close-up of the external BIAS meter, used for adjusting and monitoring tube bias.

4.2 Rear Panel

Rear view of the Cayin CS-150A amplifier showing input/output terminals
Figure 4.4: Rear view of the Cayin CS-150A amplifier, displaying all input and output terminals.
  • Balanced XLR Input Connectors: For high-quality balanced audio sources.
  • Single-Ended RCA Line-in Connectors (LINE1, LINE2): Two pairs for standard RCA audio sources.
  • PRE-IN Connectors: Allows the CS-150A to be used as a power amplifier, bypassing its preamplifier section.
  • Right Speaker Output (8Ω, 4Ω, 0Ω): Terminals for connecting the right speaker, with options for 4-ohm and 8-ohm impedance.
  • Left Speaker Output (8Ω, 4Ω, 0Ω): Terminals for connecting the left speaker, with options for 4-ohm and 8-ohm impedance.
  • AC INPUT: Power input connector (supports 120V/230V).
  • Model & Serial No.: Identification labels for the amplifier.
Rear panel connections including XLR, RCA, PRE-IN, and Speaker Outputs
Figure 4.5: Detailed view of the rear panel connections, including balanced XLR, single-ended RCA, PRE-IN, and custom-designed speaker terminals.

4.3 Internal Components & Design Features

  • Vacuum Tubes: Utilizes TUNG-SOL KT150 for power amplification, RCA 22DE4 for power rectification, and TUNG-SOL 6SN7GTB for voltage amplification and driver stage.
  • Matched-pair Custom Build EI Output Transformers: Enable complicated multi-layer winding and multiple impedance output to match different needs, ensuring balanced, natural, and realistic sound.
  • Custom Designed Toroid Transformer: Provides strong power production, reduced impedance, and hum for reliable performance.
  • Point-to-point Wiring: The entire circuitry is handwired by skilled craftsmen, improving overall efficiency and conductivity with high transparency and refinement.
  • Premium Shield Silver-plated Cables: Minimized interference during transmission.
Internal view of the amplifier highlighting TUNG-SOL KT150, RCA 22DE4, and TUNG-SOL 6SN7GTB tubes
Figure 4.6: Internal view showing the arrangement of TUNG-SOL KT150, RCA 22DE4, and TUNG-SOL 6SN7GTB vacuum tubes.
Image showing point-to-point wiring inside the amplifier
Figure 4.7: Close-up of the meticulous point-to-point wiring, enhancing signal integrity.
Image of a custom-designed toroid transformer
Figure 4.8: Custom-designed toroid transformer for stable and powerful performance.
Image of matched-pair custom build EI output transformers
Figure 4.9: Matched-pair custom build EI output transformers, crucial for sound quality.
Image showing silver-plated cables
Figure 4.10: Premium shield silver-plated cables used for minimized interference.

5. Setup

  1. Placement: Place the amplifier on a sturdy, level surface with ample space for ventilation (at least 15-20 cm clearance on all sides).
  2. Speaker Connection: Connect your speakers to the appropriate 4Ω or 8Ω speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -).
  3. Audio Source Connection:
    • For balanced sources, use XLR cables to connect to the Balanced XLR Input Connectors.
    • For unbalanced sources, use RCA cables to connect to LINE1 or LINE2 RCA inputs.
    • To use the CS-150A as a power amplifier, connect your preamplifier's output to the PRE-IN connectors.
  4. Power Connection: Ensure the voltage selector (if present, typically internal or auto-sensing) matches your local mains voltage (120V or 230V). Connect the power cord to the AC INPUT on the rear panel and then to a grounded wall outlet.
  5. Tube Cage: For safety, install the provided protective tube cage over the vacuum tubes.

6. Operating Instructions

  1. Power On: Flip the Power switch on the front panel to the 'ON' position. The amplifier features a soft-start circuit for tube protection, so there will be a slight delay before full operation.
  2. Input Selection: Rotate the Input Selector knob on the front panel or use the remote control to choose your desired audio source (AUX, LINE1, LINE2, PRE-IN). The Input Source Memory Feature will restore the last selected input upon power-off.
  3. Volume Control: Adjust the Volume knob on the front panel or use the remote control to set the desired listening level. Start with a low volume and gradually increase it.
  4. Selecting Operation Mode (TR/UL):
    Image describing Dual Operation Mode (Triode/Ultralinear) with their sound characteristics
    Figure 6.1: Description of Triode and Ultralinear operation modes.
    • Use the TR/UL switch on the front panel or the dedicated button on the remote control to toggle between Triode and Ultralinear modes.
    • Triode Mode: Offers a tendering, rich harmonic, smooth, lush, and holographic sound. Ideal for vocal and string music.
    • Ultralinear Mode: Provides improved power and extension, clean, energetic, and authoritative sound. Ideal for music requiring punch, dynamics, and control.
  5. Adjusting BIAS Level:
    Close-up of the external BIAS meter for adjustment and monitoring
    Figure 6.2: External BIAS meter for easy adjustment and monitoring.
    • Use the BIAS switch (HIGH/STANDARD) on the front panel to select the BIAS level that best matches your speakers for optimal sound performance.
    • Monitor the BIAS meter to ensure proper operation.
  6. Negative Feedback (NFB) Selection:
    • Use the NFB switch (HIGH/LOW) on the front panel to choose between two levels of negative feedback. This allows you to experience different sound outputs and fine-tune the amplifier's sonic characteristics.
  7. Remote Control: The included remote control allows for convenient adjustment of input selection, volume, and switching between Triode and Ultralinear modes.
  8. Image showing the remote control and its dedicated TR/UL switch
    Figure 6.3: Premium remote control with dedicated TR/UL switch.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier's exterior. Avoid using liquid cleaners or solvents, as they may damage the finish.
  • Tube Care: The soft-start circuit helps prolong tube life. However, tubes have a finite lifespan and may need replacement over time. Consult a qualified technician for tube replacement.
  • Ventilation: Regularly check that the ventilation openings are clear of dust and debris to prevent overheating.
  • Storage: If storing the amplifier for an extended period, disconnect it from power, allow it to cool, and cover it to protect from dust.

8. Troubleshooting

If you encounter any issues, please refer to the following troubleshooting guide:

Problem Possible Cause Solution
No sound output Power not connected; Input not selected; Volume too low; Speaker cables loose/incorrectly connected; Faulty source component. Check power connection and switch; Select correct input; Increase volume; Verify speaker cable connections and polarity; Test with a different audio source.
Distorted or poor sound quality Incorrect BIAS setting; Faulty tubes; Loose connections; Speaker impedance mismatch; Poor quality audio source. Adjust BIAS using the front panel switch and meter; Consult technician for tube check/replacement; Check all cable connections; Ensure speaker impedance matches amplifier output; Use a high-quality audio source.
Humming or buzzing noise Ground loop; Nearby interference; Faulty cables; Tube microphonics. Ensure proper grounding; Move amplifier away from other electronics; Replace audio cables; Consult technician for tube check.
Amplifier not turning on Power cord not connected; Power outlet failure; Internal fuse blown. Check power cord and outlet; Try a different outlet; Contact service for fuse replacement.

If the problem persists after trying these solutions, please contact your dealer or a qualified service technician.

9. Specifications

Table of Dimensions & Specifications for the Cayin CS-150A amplifier
Figure 9.1: Detailed specifications of the Cayin CS-150A amplifier.
Feature Specification
Power Output (RMS Triode mode) 55W + 55W
Power Output (RMS Ultralinear mode) 100W + 100W
Frequency Response 9Hz ~ 50KHz (-3dB)
THD (Total Harmonic Distortion) 2% (1kHz)
S/N Ratio 90dB
Input Sensitivity (Integrated) 380mV
Input Sensitivity (Pre-In) 1200mV
Input Impedance 100kΩ
Output Impedance 4Ω, 8Ω
Power Consumption 520W
Vacuum Tubes TUNG-SOL 6SN7 x 4, TUNG-SOL KT150 x 4, RCA 22DE4
Dimensions (W x D x H) 420 x 489 x 218mm
Net Weight 34kg
Finish Options Silver or Black
Protective Cage Provided
Channels 2 (2.0)
Certification CE, RoHS

10. User Tips

  • Remote Control: The amplifier comes with a remote control for convenient operation, including input selection, volume adjustment, and switching between Triode and Ultralinear modes.
  • Aesthetic Choices: The CS-150A is available in both silver and black finishes to match various audio setups and room aesthetics.
  • Sound Customization: Experiment with the Triode/Ultralinear mode, BIAS settings, and NFB levels to find the sound profile that best suits your music and speakers.

11. Warranty & Support

For warranty information, technical support, or service inquiries, please contact your authorized Cayin dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.