1. Introduction
The Douk Audio X1 is a versatile HiFi JAN5725 Vacuum Tube Amplifier designed to enhance your audio experience. It functions as a tube amplifier, a MM phono preamplifier, and a power amplifier, capable of driving home speakers with significant output. The X1 integrates multiple input options, including Bluetooth 5.0, stereo RCA, and MM Phono for turntables, and features a low-frequency output for connecting an active subwoofer to create a 2.1 channel audio system.
2. Product Overview
The Douk Audio X1 combines classic vacuum tube aesthetics with modern functionality, offering a compact yet powerful solution for your home audio setup.

Figure 1: Douk Audio X1 Tube Amplifier Front View
Video 1: Douk Audio X1 Product Demonstration
3. Features
- Multiple Audio Inputs: Supports Bluetooth 5.0 (with APTX / APTX-LL), stereo L/R RCA, and MM Phono for turntables. Input signals can be switched losslessly.
- JAN5725 Vacuum Tubes: Utilizes JAN5725 vacuum tubes to deliver a warm, sweet, delicate, and mellow sound, enhancing the audio quality with rich mid-range, powerful bass, and clear high frequencies. The tubes are pluggable for easy replacement or 'tube rolling'.
- High Output Power: Equipped with a TDA7498E amplifier IC, providing a maximum output power of 160W + 160W (at 4Ω load), capable of driving most home passive speakers.
- Subwoofer Output: Features a dedicated low-frequency output (SUB OUT) to connect an active subwoofer, allowing for a 2.1 channel audio system setup.
- Tone Control and Bypass: Includes adjustable treble and bass knobs for sound customization. A bypass function allows for listening to the original, unaltered sound. The vacuum tube circuit can also be bypassed for comparison between digital and tube sound.
- Advanced Circuitry: Double PCB design with integrated MM phono circuit, ensuring a reasonable layout, minimal wiring, and low noise. Features a QCC3008 Bluetooth chip for strong compatibility and lossless transmission, and an NE5532 op-amp for pre-amplification and tone control, contributing to excellent dynamics and a wide soundstage.
- Premium Components: Constructed with a customized aluminum alloy case for efficient heat dissipation. Incorporates high-quality components such as Siemens capacitors, NEC relays, red loop inductors, and pure copper gold-plated terminals.
- Aesthetic Design: The metal black case and vacuum tubes with selectable blue or orange decorative lighting offer a fashionable and attractive appearance, suitable for various home and desktop audio systems.

Figure 2: Internal Circuitry and Components

Figure 3: JAN5725 Vacuum Tubes

Figure 4: Tube LED Lighting Options (Blue/Orange)

Figure 5: High Output Power and Subwoofer Output
4. Specifications
| Parameter | Value |
|---|---|
| Type | Tube Amplifier |
| Channels | 2 (2.0) |
| Audio Inputs | Bluetooth 5.0, Stereo L/R RCA, MM Phono |
| Audio Outputs | Banana Speaker Jacks, Low Frequency Output (SUB OUT) |
| Bluetooth Chip | QCC3008 (supports APTX / APTX-LL) |
| Amplifier IC | TDA7498E |
| Op-Amp | NE5532 |
| Max Output Power | 160W + 160W (4Ω load) |
| Speaker Impedance | 4-8Ω |
| Frequency Response | 20Hz-20KHz (±3dB) |
| Signal-to-Noise Ratio (SNR) | >90dB |
| Total Harmonic Distortion (THD) | 0.5% |
| Input Sensitivity | 0.775V |
| Treble and Bass Range | ±6dB |
| Working Voltage | DC 19V-35V |
| Dimensions (W*D*H) | 115*166*60mm / 4.53*6.54*2.36in |
| Net Weight | 782g / 1.72lb |
| Package Weight (with 32V5A power supply) | 1400g / 3.09lb |
| Certification | CE |
5. Package Contents
Please check the package carefully upon receipt to ensure all items are present and undamaged.
- 1x Douk Audio X1 Amplifier
- 2x JAN5725 Vacuum Tubes
- 1x 32V/5A Power Supply (optional, depending on purchase)
- 1x Bluetooth Antenna
- 1x User Manual (this document)

Figure 6: Package Contents Diagram
6. Setup
6.1 Front Panel Controls

Figure 7: Front Panel Controls
- Power Switch: Turns the amplifier on or off.
- Bluetooth Indicator: Lights up when Bluetooth is active and paired.
- Input Switch: Selects the audio input source (BT for Bluetooth, PHONO for MM Phono, RCA for stereo RCA).
- Bassboost Switch: Toggles bass boost (BOOST) or flat response (FLAT).
- Tone Switch: Enables (ON) or bypasses (OFF) the treble and bass tone controls.
- Tube LED Switch: Controls the decorative LED lighting for the vacuum tubes (BLUE, OFF, ORG for Orange).
- Bass Knob: Adjusts the low-frequency level.
- Main Volume Knob: Controls the overall output volume.
- Treble Knob: Adjusts the high-frequency level.
6.2 Rear Panel Connections

Figure 8: Rear Panel Connections
- GND (Ground) Terminal: For connecting the ground wire from a turntable when using the MM Phono input.
- MM PHONO Input (R/L): Connect your MM (Moving Magnet) turntable here.
- AUDIO IN (R/L): Connect stereo RCA audio sources (e.g., CD player, DAC, TV).
- BT (Bluetooth) Antenna: Screw in the provided Bluetooth antenna for optimal wireless reception.
- SUB OUT: Connect an active subwoofer to this output.
- SPEAKER OUTPUT (R/L): Connect your passive speakers using banana plugs or bare wire. Ensure correct polarity (+ to + and - to -).
- DC IN (19V-35V): Connect the DC power adapter here.
6.3 Initial Connection Steps
- Install Bluetooth Antenna: Screw the Bluetooth antenna firmly into the BT port on the rear panel.
- Connect Speakers: Connect your passive speakers to the SPEAKER OUTPUT terminals. Ensure correct polarity.
- Connect Audio Sources: Choose your desired audio input:
- For a turntable: Connect the turntable's RCA cables to the MM PHONO inputs and its ground wire to the GND terminal.
- For other devices (CD player, TV, PC): Connect their RCA output cables to the AUDIO IN inputs.
- For Bluetooth: No physical cable connection is needed to the input ports, but ensure the antenna is installed.
- Connect Subwoofer (Optional): If using an active subwoofer, connect it to the SUB OUT port.
- Connect Power: Connect the DC power adapter (19V-35V, 5A recommended) to the DC IN port. Note that the power supply may be sold separately.
7. Operation
7.1 Power On/Off
Press the Power Switch on the front panel to turn the amplifier on or off. The vacuum tubes will glow once powered on.
7.2 Input Selection
Use the Input Switch on the front panel to cycle through the available audio sources: BT (Bluetooth), PHONO (MM Phono), and RCA (Stereo RCA).
7.3 Bluetooth Pairing
- Switch the Input Switch to 'BT'. The Bluetooth Indicator LED will start blinking, indicating it's in pairing mode.
- On your device (phone, tablet, computer), enable Bluetooth and search for available devices.
- Select 'Douk Audio X1' from the list. Once paired, the Bluetooth Indicator LED will glow steadily.
7.4 Adjusting Sound
- Main Volume Knob: Rotate clockwise to increase volume, counter-clockwise to decrease.
- Bass Knob: Adjusts the low-frequency output.
- Treble Knob: Adjusts the high-frequency output.
7.5 Tone Control and Bypass
The Tone Switch allows you to enable or disable the Bass and Treble knobs. Set to 'ON' to use the tone controls, or 'OFF' to bypass them for a flat frequency response. This also bypasses the vacuum tube circuit, allowing you to hear the sound without tube coloration.
7.6 Bass Boost Function
The Bassboost Switch allows you to apply a bass boost (BOOST) or maintain a flat bass response (FLAT).

Figure 9: Bass Boost and Tone Control
7.7 Tube LED Control
Use the Tube LED Switch to change the decorative lighting color of the vacuum tubes to blue, orange, or turn it off.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the amplifier's exterior. Avoid using liquid cleaners or solvents.
- Ventilation: Ensure the amplifier has adequate ventilation. Do not block the ventilation holes or place it in an enclosed space.
- Tube Replacement: The JAN5725 vacuum tubes are pluggable. If a tube needs replacement or for 'tube rolling' (experimenting with different compatible tubes), ensure the amplifier is powered off and unplugged. Carefully pull the old tube straight up from its socket and insert the new tube, aligning the pins correctly.
9. Troubleshooting
- No Sound:
- Check all cable connections (input, speaker, power).
- Ensure the correct input source is selected.
- Verify that the volume is not set to minimum.
- Confirm speakers are properly connected and functional.
- Distorted Sound:
- Reduce the volume level.
- Check if speaker impedance matches the amplifier's specifications (4-8Ω).
- Ensure audio source is not overdriving the input.
- Inspect tubes for damage or improper seating.
- Bluetooth Not Connecting:
- Ensure the Bluetooth antenna is securely attached.
- Verify the amplifier's input is set to 'BT'.
- Make sure the amplifier is in pairing mode (Bluetooth LED blinking).
- Try restarting both the amplifier and your Bluetooth device.
- Ensure no other devices are currently connected to the amplifier via Bluetooth.
- Humming/Noise:
- Check all ground connections, especially for turntables.
- Ensure power cables are not running parallel to audio cables.
- Try a different power outlet.
10. User Tips
- Tube Rolling: The X1 features pluggable tube sockets, allowing users to experiment with compatible vacuum tubes (e.g., 6K4/6J1/6J4/6AK5/6* series) to customize the sound signature to their preference. Always ensure the amplifier is powered off and unplugged before changing tubes.
- Power Supply: The amplifier requires a DC 19V-35V power supply. If your purchase did not include one, ensure you acquire a compatible adapter, typically 32V, 5A, 100-240V.
- Digital Audio Sources: While the amplifier processes analog signals, you can connect digital audio sources (like FLAC or DSD files) by using an external Digital-to-Analog Converter (DAC) between your digital source and the amplifier's RCA inputs.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Douk Audio website or contact your original point of purchase. Keep your purchase receipt as proof of purchase.
12. Additional Resources
A detailed user manual in PDF format is available for download. This document provides further functional specifications and diagrams.