1. Introduction
The Douk Audio P2 is a multi-functional HiFi audio device designed to enhance your listening experience. It combines the roles of a vacuum tube preamplifier, a Bluetooth 5.0 receiver, a stereo headphone amplifier, and a USB music player. With its versatile input options and tone control features, the P2 delivers warm, sweet, and detailed sound for various audio setups.
2. Safety Information
- Do not expose the device to rain, moisture, or extreme temperatures.
- Ensure proper ventilation around the unit to prevent overheating.
- Use only the provided DC 12V power adapter.
- Avoid placing heavy objects on the unit.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- 1 x P2 Preamp
- 2 x 6K4 Tube
- 1 x DC12V Power Adapter
- 1 x Remote Control (batteries not included, requires CR2025)
- 1 x Bluetooth Antenna
- 1 x Instruction Manual

4. Product Overview
4.1 Front Panel

- TF Card Input: For playing music from a TF card.
- USB Input: For playing music from a U-disk (USB 2.0 thumbdrive).
- IR: Infrared receiver for the remote control.
- Headphone Output: 3.5mm jack for connecting headphones.
- Bass Knob: Adjusts low-frequency audio levels.
- Mid Knob: Adjusts mid-range frequency audio levels.
- Treble Knob: Adjusts high-frequency audio levels.
4.2 Top Panel Controls

- Power Switch/Input Select Button (SEL): Short press to cycle through inputs (RCA, BT, USB, TF). Long press to power on/off.
- Previous Song / Volume - Button: Short press for previous song (USB/TF mode), long press for volume down.
- Play / Pause / Tube LED Button (LED): Short press for play/pause (USB/TF mode). Long press to turn on/off tube LED.
- Next Song / Volume + Button: Short press for next song (USB/TF mode), long press for volume up.
- Input Indicators (RCA, BT, USB, TF): LEDs to show the currently selected input.
4.3 Rear Panel

- Bluetooth Antenna Port: Connect the provided Bluetooth antenna here.
- RCA Input (L/R): For connecting analog audio sources via RCA cables.
- RCA Output (L/R): For connecting to an amplifier or active speakers.
- DC 12V IN: Power input for the DC 12V adapter.
5. Setup
5.1 Initial Setup
- Install Tubes: Gently insert the two 6K4 vacuum tubes into their sockets on the top panel. Ensure they are seated firmly.
- Attach Bluetooth Antenna: Screw the provided Bluetooth antenna into the antenna port on the rear panel.
- Power Connection: Connect the DC 12V power adapter to the 'DC 12V IN' port on the rear panel, then plug the adapter into a power outlet.
5.2 Connecting Audio Sources
- Bluetooth: Select 'BT' input. On your device (phone, tablet, etc.), search for 'Douk Audio P2' and pair.
- RCA Input: Connect your audio source (e.g., CD player, TV, media player) to the 'INPUT' RCA ports on the rear panel using RCA cables.
- U-disk/TF Card: Insert a U-disk (USB 2.0 thumbdrive) into the USB port or a TF card into the TF slot on the front panel.

5.3 Connecting Audio Outputs
- To Amplifier/Active Speakers: Connect the 'OUTPUT' RCA ports on the rear panel to your power amplifier or active speakers using RCA cables.
- Headphones: Plug your headphones into the 3.5mm headphone jack on the front panel. Both RCA and headphone outputs can be used simultaneously.


6. Operation
6.1 Power On/Off and Input Selection
- Power On: Long press the 'SEL' button on the top panel. The tube LEDs will light up.
- Input Selection: Short press the 'SEL' button to cycle through available inputs: RCA, Bluetooth (BT), USB, TF. The corresponding LED indicator will illuminate.
- Power Off: Long press the 'SEL' button again.
6.2 Volume and Playback Control
- Volume Adjustment: Long press the 'Previous Song / Volume -' button for volume down, or 'Next Song / Volume +' button for volume up.
- Track Control (USB/TF mode only): Short press 'Previous Song / Volume -' for previous track, and 'Next Song / Volume +' for next track.
- Play/Pause (USB/TF mode only): Short press the 'Play / Pause / Tube LED' button.
6.3 Tone Control
Use the 'BASS', 'MID', and 'TREBLE' knobs on the front panel to adjust the audio frequency response to your preference. These controls allow for fine-tuning of the sound signature.

6.4 Tube LED Control
Long press the 'Play / Pause / Tube LED' button to turn the tube illumination LEDs on or off.
6.5 Remote Control
The included remote control provides full functionality for power, input selection, volume, track control (USB/TF), and tube LED control. Ensure a CR2025 battery is installed in the remote.

6.6 Digital Player Functionality

When a U-disk or TF card is inserted and the corresponding input is selected, the P2 acts as a digital music player. It supports MP3, WMA, APE, FLAC, and WAV formats. No additional drivers are required.
6.7 Product Demonstration Video
7. Maintenance
7.1 Cleaning
Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive chemicals.
7.2 Tube Replacement (Tube Rolling)
The P2 uses 6K4 tubes by default. For different sound characteristics, these tubes can be replaced with compatible types such as 6J1, 6J4, GE5654, 6AK5, or 6*1n. Ensure the unit is powered off and unplugged before attempting to replace tubes. Handle tubes carefully as they can be fragile.
8. Troubleshooting
- No Sound Output:
- Ensure the P2 is powered on and the correct input is selected.
- Verify that the volume is not set to minimum.
- Check all audio cable connections (input and output) are secure.
- Confirm that your amplifier or active speakers are powered on and functioning correctly.
- Remember, the P2 is a preamp and requires an amplifier or active speakers; it cannot directly drive passive speakers.
- Distorted Sound:
- Check if the input signal level is too high, causing clipping.
- Adjust the Bass, Mid, and Treble knobs to a neutral position or to reduce excessive boosting.
- Ensure tubes are properly seated.
- Remote Control Not Working:
- Check if the remote control battery (CR2025) is installed correctly and has sufficient charge.
- Ensure there are no obstructions between the remote and the unit's IR receiver.
- U-disk/TF Card Not Playing:
- Ensure the 'USB' or 'TF' input is selected.
- Verify that the U-disk is a USB 2.0 thumbdrive and not a PC-USB connection.
- Check if the audio files are in a supported format (MP3, WMA, APE, FLAC, WAV).
- Ensure the storage device is formatted correctly and not corrupted.
- Track Control Not Working in RCA Input Mode:
- This is normal behavior. Track control buttons (previous/next song) are only functional when using USB or TF card inputs.
9. Specifications
| Feature | Specification |
|---|---|
| Audio Input | Bluetooth / Stereo RCA / U-disk / TF Card |
| Audio Output | Stereo RCA / 3.5mm Headphone Jack |
| Supported U-disk/TF Card Formats | MP3 / WMA / APE / FLAC / WAV |
| Max U-disk Storage | 32GB |
| Max TF Card Storage | 32GB |
| Tube Model | 6K4*2 (Default) |
| Frequency Response | ±3dB (20Hz-20KHz) |
| Treble/Mid/Bass Range | ±6dB |
| Input Sensitivity | 0.775V |
| THD | 0.05% |
| SNR | ≥98dB |
| Headphone Output Power | 100mW/32Ω |
| Matched Headphone Impedance | 16-64Ω |
| Working Voltage | DC 12V |
| Dimensions (W*D*H) | 115*128*33mm / 4.53*5.04*1.30in |
| Net Weight | 420g / 0.93lb |
| Package Weight | 700g / 1.54lb |

10. User Tips
- The P2 is designed as a preamplifier and headphone amplifier. It must be connected to a power amplifier or active speakers for sound output to external speakers. It cannot directly drive passive speakers or be used directly with turntables.
- For optimal sound quality, experiment with different compatible tubes (e.g., 6J1, 6J4, GE5654, 6AK5, 6*1n) to find the sound signature that best suits your preferences.
- The remote control can adjust the volume for both RCA and headphone outputs.
- When using U-disk or TF card inputs, ensure your media is stored on a USB 2.0 thumbdrive or a compatible TF card, and that audio files are in supported formats (MP3, WMA, APE, FLAC, WAV).
11. Support
For further assistance, technical support, or warranty inquiries, please contact the Douk Audio Official Store or your retailer. Provide your product model (P2) and a detailed description of the issue for efficient support.