RETEVIS MA05

Contents

Retevis MA05 Omni-Directional Base Station Antenna User Manual

Model: MA05

1. Introduction

The Retevis MA05 is an omni-directional base station antenna designed for VHF and UHF bands. It features high gain, wide bandwidth, and a low standing wave ratio, making it an ideal communication antenna. Constructed with high-strength, high-quality fiberglass (FRP encapsulation), it offers excellent waterproof, anti-corrosion, and anti-ultraviolet properties, ensuring strong wind resistance and suitability for harsh environments, including marine applications. Its design allows for easy disassembly and assembly.

2. Product Features

  • Durable Construction: FRP encapsulation provides omnidirectional waterproofing, corrosion resistance, anti-ultraviolet protection, and strong wind resistance, preventing cracking and ensuring a strong seal.
  • High Performance: Utilizes a pure copper vibrator for high receiving sensitivity and accurate impedance matching, contributing to longer communication distances.
  • Modular Design: Features a three-section detachable design for convenient disassembly and assembly.
  • Power Handling: Supports a maximum power of 200W.
  • High Gain: Offers a gain of 5.5/8.5dBi for enhanced signal strength.

3. Specifications

AttributeValue
BrandRETEVIS
Model NumberMA05
Item TypeAntenna
Frequency144/430MHz
Gain5.5/8.5dBi
Max Power200W
VSWRLess than 1.5
Impedance50Ω
ConnectorSL16-K
Length2.2M
Radome MaterialFiberglass
Pole DiameterØ30~Ø62 mm
Net Weight1450g
Applicable ModelsRetevis RT97, RT9550, RT92, RT74 Mobile Radio
Applicable Coaxial CableRetevis CA31, CA32

The VSWR chart below illustrates the antenna's performance across its operating frequencies, showing optimal low VSWR in the 144MHz and 430MHz bands.

VSWR chart for Retevis MA05 antenna showing low VSWR at 144MHz and 430MHz
Figure 1: VSWR Chart for MA05 Antenna

4. Package Contents

Please check the package carefully to ensure all items are present:

  • 1x MA05 Fiberglass Base Station Antenna (UV dual-segment, three-section, 2.2m, SL16K interface)
  • 1x Aluminum Alloy Connecting Pipe
  • 2x Aluminum Fixtures (for mounting)
Exploded view of Retevis MA05 antenna components including sections, mounting hardware, and ground plane elements
Figure 2: Retevis MA05 Antenna Components

5. Setup and Installation

The MA05 antenna features a three-section detachable design for ease of assembly and installation. Follow these general steps:

  1. Assemble Antenna Sections: Carefully screw the three fiberglass antenna sections together. Ensure the threaded connections are secure but do not overtighten.
  2. Attach Ground Plane Elements (if applicable): If your model includes ground plane elements, attach them to the base of the antenna as shown in the diagrams.
  3. Mounting Location: Select a suitable outdoor location for mounting, ensuring it is clear of obstructions and as high as possible for optimal performance. The antenna is designed for pole mounting with a diameter between Ø30mm and Ø62mm.
  4. Secure Mounting: Use the provided aluminum alloy connecting pipe and two aluminum fixtures to securely attach the antenna to a sturdy pole. Ensure the mounting is stable and can withstand wind loads.
  5. Connect Coaxial Cable: Connect a compatible coaxial cable (e.g., Retevis CA31, CA32) to the SL16-K connector at the base of the antenna. Ensure the connection is tight and weatherproofed.
  6. Route Cable: Route the coaxial cable to your radio equipment, avoiding sharp bends and potential damage points.
Close-up of the threaded connections between the fiberglass antenna sections
Figure 3: Antenna Section Connections
Detailed view of the SL16-K connector at the base of the antenna
Figure 4: SL16-K Connector Detail
Assembled Retevis MA05 antenna with ground plane elements, mounted on a pole against a blue sky
Figure 5: Assembled Antenna with Ground Plane
Retevis MA05 antenna mounted on a rooftop structure, showing its full length and installation
Figure 6: Antenna Mounted on Rooftop

6. Operation

Once installed, the Retevis MA05 antenna is ready for use with compatible VHF/UHF radio equipment. It operates on 144MHz and 430MHz frequency bands. Ensure your radio is tuned to the correct frequency within these bands for optimal performance. The antenna's 50Ω impedance and VSWR of less than 1.5 ensure efficient power transfer from your radio.

7. Maintenance

The MA05 antenna is designed for durability and minimal maintenance due to its fiberglass construction and weather-resistant properties. However, periodic checks are recommended:

  • Visual Inspection: Annually inspect the antenna for any physical damage, cracks, or signs of wear, especially after severe weather conditions.
  • Connection Integrity: Check all connections, including antenna sections, mounting hardware, and the coaxial cable connector, to ensure they remain tight and free from corrosion.
  • Mounting Stability: Verify that the mounting pole and fixtures are still secure and stable.
  • Cleaning: If necessary, gently clean the antenna radome with a soft cloth and mild soap and water. Avoid abrasive cleaners.

8. Troubleshooting

If you experience issues with your MA05 antenna, consider the following:

  • Poor Signal / Low Performance:
    - Check all coaxial cable connections for tightness and proper seating.
    - Ensure the coaxial cable itself is not damaged or kinked.
    - Verify that your radio is set to the correct frequency within the antenna's operating bands (144/430MHz).
    - Confirm the antenna is mounted in a clear, unobstructed location.
  • High VSWR Readings:
    - A high VSWR indicates a mismatch and can damage your radio. Immediately cease transmission if readings are excessively high.
    - Inspect the SL16-K connector and coaxial cable for damage or improper connection.
    - Ensure all antenna sections are fully and correctly assembled.
    - Check for any foreign objects or damage to the antenna elements.

9. User Tips

  • Cable Selection: The MA05 antenna uses an SL16-K connector. Ensure your coaxial cable has a compatible connector (e.g., PL-259) to match. Cables are not included with the antenna.
  • Installation Planning: The antenna has a total length of 2.2 meters. Plan your installation location accordingly to accommodate its size and ensure adequate clearance.
  • Compatibility: This antenna is compatible with various Retevis mobile radios such as RT97, RT9550, RT92, and RT74.
  • Standard Mounting: The mounting assembly is standard for this type of antenna, making installation straightforward for those familiar with base station antenna setups.

10. Warranty and Support

For warranty information, technical support, or service inquiries regarding your Retevis MA05 antenna, please contact RETEVIS Official Store or refer to the official Retevis website for customer service details. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.