1. Product Introduction
Thank you for choosing the Retekess TD162 guest paging system. This system typically consists of one keyboard transmitter and multiple coaster pagers. Each keyboard transmitter can support up to 998 coaster pagers, making it a scalable solution for various service environments.
The TD162 system is designed to improve operational efficiency and customer satisfaction in busy establishments. It is widely used in fast-food restaurants, coffee houses, pizza shops, automotive service centers (4S stores), churches, clinics, hospitals, and other locations where guests wait for service.
By streamlining the customer notification process, the system helps reduce labor costs and enhances the overall service experience.

2. Setup Instructions
2.1. Power On
- Connect the power supply to the keyboard transmitter. The display will light up.
- Place the coaster pagers onto the charging slots of the transmitter base.
- Ensure the power source is connected to the charging base.
- In charging mode, the indicator light on each pager will be continuously lit. When fully charged and in standby mode, the indicator light will flash.
- If a pager's battery is low, "Lo" will be displayed on its digital tube.
- Pagers can also be powered on by simply placing them back into a powered charging slot.
2.2. Pager ID Setting (F2)
This setting allows you to pair pagers with specific IDs.
- Press the "Call" and "Delete" buttons simultaneously on the keyboard transmitter to enter the setting mode. "F1" will appear on the display.
- Enter the number "2" using the keypad. "F2" will then be displayed.
- Press the "Call" button to enter the sub-menu. "0" will be displayed.
- Enter the desired ID number (1-998) for the pager using the keypad.
- Remove the pager from its charging slot. Within 5 seconds, press the "Call" button. The pager will flash and beep, indicating successful pairing.
- The system will then return to "F2". Repeat for other pagers as needed.
2.3. Keypad ID Setting (F1)
This setting is for configuring the keypad's own ID, if applicable for multi-keypad setups.
- Press the "Call" and "Delete" buttons simultaneously to enter the setting mode. "F1" will appear on the display.
- Press the "Call" button to enter the sub-menu. "0" will be displayed.
- Enter the desired ID number (1-999) for the keypad using the keypad.
- Press the "Call" button to confirm. The system will return to "F1".

3. Operating Instructions
3.1. Basic Operation Flow
- A customer places an order. The staff provides a coaster pager with a unique ID (e.g., No.1-998).
- When the order is ready, the staff at the counter enters the pager's ID number on the keyboard transmitter and presses the "Call" button.
- The corresponding pager will activate with a vibration, beep, or flash (depending on settings) to alert the customer.
- The customer collects their order and returns the pager to the charging slot.

3.2. Calling a Pager
To call a pager:
- Ensure the pager is in standby mode.
- Input the corresponding ID number of the pager using the keyboard transmitter.
- Press the "Call" button. The pager will activate according to its set prompt mode (beep, vibrate, or flash).
- The pager will stop its alert once it is placed back into a charging slot.
3.3. Multi-Window Calling
The TD162 system supports multiple hosts (keyboard transmitters) calling the same pager. This feature is useful in establishments with multiple service windows or counters, allowing any designated station to notify a customer.

3.4. Power Off All Pagers
To turn off all pagers simultaneously:
- Place all pagers onto their respective charging slots.
- On the keyboard transmitter, press "999" and then the "Call" button.
- All pagers in the charging slots will enter charging mode (no number displayed on the digital tube).
- You can then disconnect the power source from the charging base.

4. Settings
The TD162 system offers various customizable settings to tailor its operation to your needs. To enter the setting mode, press the "Call" and "Delete" buttons simultaneously. "F1" will appear on the display. Use the keypad to navigate to the desired function (F1-F6) and press "Call" to enter its sub-menu.

4.1. Prompt Time Setting (F3)
This setting controls the duration of the pager's reminder alert.
- From the main setting mode, enter "3" on the keypad to select "F3".
- Press "Call" to enter the sub-menu. "0" will be displayed.
- Enter the desired reminder duration in seconds (0-250s). If set to 0s, the pager will not stop automatically until returned to the charging slot.
- Remove the pagers from charging slots, and press "Call" button within 5s. The pagers will flash and beep, confirming the setting.
- The system will automatically return to "F3".
4.2. Beep Prompt Speed Setting (F4)
This setting adjusts the speed of the pager's beep alert.
- From the main setting mode, enter "4" on the keypad to select "F4".
- Press "Call" to enter the sub-menu. "0" will be displayed.
- Enter the desired value: 0 (turn off beep), 1 (slow mode), 2 (medium speed), or 3 (fast mode).
- Remove the pagers from charging slots, and press "Call" button within 5s. The pagers will flash and beep, confirming the setting.
- The system will automatically return to "F4".
4.3. Vibration Prompt Setting (F5)
This setting enables or disables the pager's vibration alert.
- From the main setting mode, enter "5" on the keypad to select "F5".
- Press "Call" to enter the sub-menu. "0" will be displayed.
- Enter the desired value: 0 (turn off vibration), or any other value (turn on vibration mode).
- Remove the pagers from charging slots, and press "Call" button within 5s. The pagers will flash and beep, confirming the setting.
- The system will automatically return to "F5".
4.4. Flash Prompt Speed Setting (F6)
This setting adjusts the speed and mode of the pager's flash alert.
- From the main setting mode, enter "6" on the keypad to select "F6".
- Press "Call" to enter the sub-menu. "0" will be displayed.
- Enter the desired value: 0 (turn off flash), 1 (slow mode), 2 (fast mode), or 3 (breathing light mode).
- Remove the pagers from charging slots, and press "Call" button within 5s. The pagers will flash and beep, confirming the setting.
- The system will automatically return to "F6".
After all settings are completed, press the "Delete" button to return to the Call state.
5. Maintenance
5.1. Cleaning
The TD162 pagers are designed to be slightly water and oil resistant, making them easy to clean. Use a soft, damp cloth to wipe down the pagers and the keyboard transmitter. Avoid using harsh chemicals or abrasive materials that could damage the devices.

5.2. Battery Care
To ensure optimal battery performance and longevity, avoid leaving the pagers on charge or in standby mode for extended periods when they are not in use. Prolonged charging or standby without use can reduce battery life.
6. Troubleshooting
6.1. Low Battery Indication
If a pager displays "Lo" on its digital tube, it indicates a low battery. Place the pager back onto a charging slot to recharge it.

6.2. Range Issues
The TD162 system has a wireless range of 200-300 meters in open areas. If you experience issues with pagers not receiving calls, consider the following:
- Obstructions: Walls, metal structures, and other electronic devices can interfere with the signal. Try to minimize obstructions between the transmitter and pagers.
- Distance: Ensure pagers are within the effective operating range of the transmitter.
- Interference: Other wireless devices operating on similar frequencies might cause interference.

6.3. Pager Not Responding
- Check if the pager is powered on and has sufficient battery charge.
- Verify that the correct ID number is being entered on the transmitter.
- Ensure the pager is properly paired with the transmitter (refer to Pager ID Setting).
7. Specifications
7.1. Coaster Pager
| Feature | Specification |
|---|---|
| Operating Voltage | DC 3.7V (Rechargeable battery) |
| Working Frequency | 433MHz |
| Standby Current | <=9mA |
| Standby Time | ~20 Hours |
| Receiving Sensitivity | -110dBm |
| Battery Capacity | 300mAh |
| Modulation Technology | OOK |
| Weight | 44g / 1.55oz |
| Size | Φ80 * 11.5mm |
7.2. Keypad Transmitter
| Feature | Specification |
|---|---|
| Power Input | DC12V / 1A |
| Working Frequency | 433MHz |
| Output Power | 240mW |
| Modulation Technology | OOK |
| Weight | 240g / 8.47oz |
| Size | 270 * 90 * 29mm |

8. User Tips
- Customizing Pager IDs: If you need to change a pager's ID or re-pair it, follow the "Pager ID Setting (F2)" instructions carefully. This allows for flexible system management.
- Power Adapter Compatibility: Always use the provided power adapter (DC12V/1A) to ensure proper functioning and to avoid damage to the system. If a replacement is needed, ensure it matches the specified voltage and current.
- Optimize Range: For best performance, place the keyboard transmitter in a central location with minimal physical obstructions to maximize the wireless range.
- Regular Cleaning: Due to the nature of restaurant environments, regular cleaning of pagers and the transmitter is recommended to maintain hygiene and device longevity.
9. Warranty and Support
9.1. Warranty Information
Most new products carry a two-year manufacturer's warranty from the date of purchase. To claim warranty service, you will need to provide a receipt or proof of purchase from the original seller for verification.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Damage due to misuse or abuse of the product.
- Damage resulting from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
9.2. RF Energy Exposure and Product Safety Guide
ATTENTION!
Before using this radio, please read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications. RF energy, when used improperly, can cause biological damage. All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. Manufacturers also recommend specific operating instructions to users to control RF energy exposure.
For more information on RF energy exposure and compliance, please refer to: http://www.who.int/en/
Local Government Regulations
When radios are used as a consequence of employment, local government regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Your Retekess radio has an RF Exposure Product Label, and this manual includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio and should not be made. Transmitter adjustments should only be made by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs.
FCC Requirements
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Requirements
Henan Eshow Electronic Commerce Co., Ltd. declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retekess.com.
IC Requirements (Canada)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Safety Precautions
- Avoid Choking Hazard: Small parts. Not for children under 3 years.
- Protect Your Hearing: Use the lowest volume necessary. Turn up volume only in noisy surroundings. Turn down volume before adding headset/earpiece. Limit time using high volume. Do not place radio speaker directly against ear. Excessive sound pressure from earphones can cause hearing loss.
- Avoid Burns: Do not use any portable radio with a damaged antenna. If a damaged antenna contacts skin, a minor burn can result. Exercise care when handling batteries, especially when conductive materials (jewelry, keys) might short circuit terminals.
- Long Transmission: When the transceiver is used for long transmissions, the radiator and chassis may become hot.
- Charger Use: Do not use charger outdoors or in moist environments. Use only in dry locations. Do not disassemble the charger. Do not operate if broken or damaged.
- Vehicle Safety: Do not place a portable radio in the area over an airbag or in the airbag deployment area.
- Approved Accessories: This radio meets RF exposure guidelines when used with Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance.
9.3. Contact Information
For support or inquiries, please contact:
Henan Eshow Electronic Commerce Co., Ltd.
Email: support@retekess.com
Web: www.retekess.com