Introduction
The ZK-502M MINI is a compact and versatile Bluetooth 5.0 power audio amplifier board designed for home theater and stereo audio applications. It offers multiple audio input options including Bluetooth, AUX, USB flash disk, and USB sound card, delivering 50W per channel (50WX2) stereo output. This manual provides detailed instructions for assembly, setup, operation, and troubleshooting to ensure optimal performance.

Specifications
| Feature | Specification |
|---|---|
| Product Name | MINI 2*50W Bluetooth 5.0 Power Amplifier Module |
| Model Number | ZK-502M |
| Chip Model | Domestic amplifier chip |
| Audio Input | Bluetooth, AUX, USB Flash Disk, Computer USB (Plug and Play) |
| Power Supply | DC5-24V (High power recommended high voltage) |
| Adapter Speaker | 10-100W; 4-8Ω |
| Channels | 2 (2.0 Stereo) |
| Bluetooth Version | 5.0 (>15 meters without occlusion) |
| Bluetooth Name | Wuzhi Audio |
| Protection Mechanism | Overheat, Overcurrent, Short circuit protection |
| Product Size | 60mm x 60mm x 29mm |
| Product Weight | Approx. 96g (packaging) |
| Maximum Power Per Channel | 50 W |
| Origin | Mainland China |
| Package | Yes |
Output Power vs. Power Supply Voltage
| Power Supply Voltage | 8Ω Speaker Output | 4Ω Speaker Output |
|---|---|---|
| 12V | 12W + 12W | 20W + 20W |
| 15V | 18W + 18W | 30W + 30W |
| 19V | 30W + 30W | 40W + 40W |
| 24V | 40W + 40W | 50W + 50W |
Note: To achieve sufficient output power, ensure the audio input and power supply voltage/current are adequate. Higher supply voltage and current result in greater relative power. Speakers with different impedances will yield different output power. If the supply voltage and current are sufficient, a larger speaker impedance will result in lower relative sound power. Please pay attention to this relationship.
Package Contents
Please check the package for the following items:
- ZK-502M Amplifier Board (PCB with components)
- Upper cover board
- Lower cover board
- Knob
- Key cap (for switch)
- Heat sink
- M2x7 Screws (8 pieces)
- M2x12 Copper pillars (4 pieces)
- DC power adapter cable
- Small screwdriver

Setup and Installation
1. Assembly
Follow these steps to assemble the amplifier board:
- Place the lower cover board.
- Mount the PCB (Printed Circuit Board) onto the lower cover board using the M2x12 copper pillars.
- Attach the heat sink to the amplifier chip on the PCB.
- Place the upper cover board.
- Secure the assembly with the M2x7 screws.
- Install the knob onto the potentiometer shaft and the key cap onto the switch.

2. Wiring Diagram
Refer to the diagram below for proper connections:

- Power Input: Connect a DC5-24V power supply to the 5.5x2.1 DC head.
- Speaker Output: Connect your passive speakers to the 'Right channel' and 'Left channel' terminals. Alternatively, connect active speakers to the 'Audio output' (AUX OUT) jack. Note: Passive speakers and active speakers can only be used one at a time. Do not connect both simultaneously.
- Audio Input: Use the 'AUX IN' jack for analog audio input, the 'USB IN' port for USB flash disk or computer USB input, or connect via Bluetooth.
3. Power Supply Selection
The power supply is critical for module performance. A power supply with sufficient ripple output and low internal resistance is recommended. For optimal sound quality and output, especially for 50W+50W, use a 19V or 24V power supply with a current above 3A. Lower voltage/current (e.g., 9V/12V or 1A/2A) can be used but may result in reduced sound quality or distortion at high volumes.
4. Speaker Selection
The amplifier supports speakers with 4-8Ω impedance and a power rating of 10-100W. For 50W+50W output, use a 15V-24V power supply. Higher voltage will result in louder output. It is not recommended to exceed 100W per speaker. Using speakers with different impedances (e.g., 4Ω on one channel and 8Ω on the other) is generally acceptable within the 4-8Ω range, but ensure the amplifier can handle the lowest impedance safely.
Operation
1. Power On/Off and Volume Control
- Power: Use the ON/OFF switch to power the device on or off.
- Volume: Rotate the large central knob to adjust the output volume.
2. Audio Input Modes
The ZK-502M supports multiple audio input methods. You can switch between them using the input selection switch (often integrated with the power switch or a separate button).
- Bluetooth Input:
- Ensure the amplifier is powered on and in Bluetooth mode (indicated by a voice prompt or LED).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for 'Wuzhi Audio'.
- Select 'Wuzhi Audio' to pair. A voice prompt will confirm successful connection.
- Play audio from your device.
- AUX Input:
- Connect your audio source (e.g., MP3 player, CD player) to the 'AUX IN' 3.5mm jack using an audio cable.
- Switch the amplifier to AUX input mode.
- Play audio from your source device.
- USB Input (U Disk):
- Insert a USB flash drive (formatted to FAT32, max 32GB) containing audio files into the 'USB IN' port.
- Switch the amplifier to USB input mode.
- The amplifier should automatically detect and play audio files.
- USB Sound Card Input (Computer USB):
- Connect the 'USB IN' port of the amplifier to your computer's USB port using a USB cable.
- The computer should recognize the amplifier as an audio output device (plug and play).
- Select the amplifier as the audio output device on your computer.
- Play audio from your computer.
Troubleshooting
Here are solutions to common issues you might encounter:
- 1. No sound or distorted/turbid sound
- Check Power Supply: Ensure the power supply voltage and current are sufficient. If the sound is distorted, try a higher voltage rated adapter (e.g., 19V or 24V with >3A current). Insufficient power is a common cause of distortion, especially at higher volumes.
- Speaker Compatibility: Verify that your speakers are within the recommended 4-8Ω impedance and 10-100W power range.
- Connections: Double-check all wiring connections for speakers and audio input.
- Volume Level: Ensure the volume knob is turned up.
- 2. Sound is intermittent or stuck
- Power Supply: This often indicates insufficient input power or an intermittently powered-off supply. Replace with a larger, stable power supply.
- Overheat Protection: If the output power is too high for an extended period, the board may overheat and trigger its protection mechanism. Reduce volume or ensure adequate ventilation. The large heat sink helps dissipate heat.
- 3. Bluetooth connection issues
- Mode Selection: Ensure the amplifier is in Bluetooth mode.
- Distance: Keep the paired device within 15 meters of the amplifier without significant obstructions.
- Pairing: Disconnect from other Bluetooth devices and try pairing again.
- 4. USB flash drive not playing
- File System: Ensure the USB flash drive is formatted to FAT32.
- Capacity: The maximum supported capacity is 32GB.
- Mode Selection: Ensure the amplifier is in USB input mode.
- 5. Chinese voice prompts during mode switching or Bluetooth connection
- This is a normal operational feature of the device, providing audible feedback for mode changes and Bluetooth status. There is no option to change the language.

User Tips
- Power Supply is Key: Invest in a good quality power supply (19V-24V, 3A or more) for the best audio performance, especially if you plan to use the amplifier at higher volumes or with demanding speakers.
- Speaker Matching: While the amplifier is flexible, matching your speakers' impedance and power rating to the amplifier's capabilities will yield the most balanced and clear sound.
- USB Drive Prep: Always format your USB flash drives to FAT32 and ensure they are 32GB or less for reliable playback.
- Ventilation: Although equipped with a heat sink, ensure the amplifier has adequate airflow, especially during prolonged use at high volumes, to prevent overheating.
- External Antenna: The board supports a solderable external antenna for potentially improved Bluetooth range, though one is not included.
Maintenance
To ensure the longevity and optimal performance of your ZK-502M amplifier board, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or solvents.
- Dust Prevention: Keep the amplifier in a clean, dust-free environment. Dust accumulation can affect performance and lead to overheating.
- Ventilation: Ensure the heat sink and surrounding area are free from obstructions to allow for proper heat dissipation.
- Storage: When not in use for extended periods, store the amplifier in a cool, dry place, away from direct sunlight and extreme temperatures.
Warranty and Support
This product comes with standard manufacturer warranties. For specific warranty details or technical support, please refer to the seller's information or contact their customer service directly. Keep your purchase receipt as proof of purchase.