1. Introduction
The Douk Audio U4 is a versatile HiFi audio device designed to enhance your listening experience. It functions as a Bluetooth receiver, a USB Digital-to-Analog Converter (DAC), a headphone amplifier, and a stereo preamplifier. Compatible with a wide range of devices including phones, computers, power amplifiers, and active speakers, the U4 delivers clear, warm, and smooth tube sound.
It features a classic 6N3 vacuum tube to refine audio, Bluetooth 5.0 with APT-X and APTX-LL support for high-quality wireless streaming, a PCM2704 USB chip for 24bit 48KHz transmission, and a MAX9722 headphone amplifier capable of driving 16-600 ohm headphones.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Douk Audio U4 Headphone Amplifier Unit
- 1 x 6N3 Vacuum Tube
- 1 x 12V Power Adapter
- 1 x USB Cable
- 1 x Bluetooth Antenna
- 1 x User Manual

3. Product Overview
3.1 Front Panel

- Power Switch: Toggles the device on/off.
- Input Switch (SELECT): Switches between USB and Bluetooth input modes.
- 3.5mm Headphone Jack (PHONE): Output for headphones (16-600Ω impedance).
- Power Indicator: Illuminates when the device is powered on.
- USB Indicator: Illuminates when USB input is selected and active.
- Bluetooth Indicator: Illuminates when Bluetooth input is selected and connected.
- Volume Knob: Adjusts the output volume.
3.2 Rear Panel

- AUDIO OUT (RCA/AUX): Stereo L/R RCA and 3.5mm AUX outputs for connecting to active speakers or a power amplifier.
- PC-USB: USB input for connecting to computers or Android mobile phones (with OTG function).
- ANT: Connector for the Bluetooth antenna.
- DC 12V: Power input jack for the 12V power adapter.
3.3 Internal Architecture

- Amp Chip: MAX9722 (300mW output, drives 16-600 ohm headphones).
- Decoding Chip: TDA1543.
- USB Chip: PCM2704 (supports 16Bit 48KHz transmission).
- Bluetooth Chip: QCC3008 (supports APT-X, APTX-LL).
4. Setup
4.1 Initial Setup
- Install the 6N3 Tube: Carefully insert the 6N3 vacuum tube into its socket on the top of the unit. Ensure it is seated firmly.
- Attach Bluetooth Antenna: Screw the provided Bluetooth antenna onto the 'ANT' connector on the rear panel.
- Connect Power: Plug the 12V power adapter into the 'DC 12V' input on the rear panel, then connect it to a power outlet.
4.2 Audio Input Connections
- USB Input: Connect the provided USB cable from the 'PC-USB' port on the U4 to your computer (Windows/Mac/Linux) or an Android mobile phone (requires OTG function).
- Bluetooth Input: Ensure the Bluetooth antenna is connected.
4.3 Audio Output Connections
- Headphones: Plug your headphones into the 3.5mm 'PHONE' jack on the front panel.
- External Amplifier/Active Speakers: Connect the 'AUDIO OUT' RCA or 3.5mm AUX ports on the rear panel to your external amplifier or active speakers using appropriate audio cables.

5. Operating Instructions
5.1 Power On/Off
Flip the 'POWER' switch on the front panel to turn the device on or off. The Power Indicator LED will light up when the unit is on.
5.2 Input Selection
Use the 'SELECT' switch on the front panel to choose between USB and Bluetooth input modes. The corresponding USB or Bluetooth indicator LED will light up.
5.3 Volume Control
Rotate the 'VOLUME' knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume.
5.4 Bluetooth Pairing
- Switch the 'SELECT' input to Bluetooth mode. The Bluetooth indicator will blink, indicating it's in pairing mode.
- On your source device (e.g., smartphone, tablet), enable Bluetooth and search for available devices.
- Select "Douk Audio U4" from the list to pair. Once connected, the Bluetooth indicator will glow steadily.
5.5 USB DAC Function

When connected via USB to a computer or compatible Android device, the U4 acts as an external sound card. Switch the 'SELECT' input to USB mode. Your operating system should automatically detect the device. No specific drivers are typically required for Windows, Mac, Linux, or Android (with OTG).
5.6 Headphone Amplifier Function

With headphones plugged into the 3.5mm 'PHONE' jack, the U4 amplifies the audio signal from your selected input (USB or Bluetooth) to drive a wide range of headphones (16-600 ohms).
5.7 Stereo Preamp Function
When connected to an external power amplifier or active speakers via the 'AUDIO OUT' ports, the U4 acts as a preamplifier, allowing you to control the volume and select inputs for your main audio system.
6. Maintenance
6.1 Cleaning
Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
6.2 Tube Replacement
The 6N3 vacuum tube is designed for easy replacement. If you wish to experiment with different tubes for varied sound characteristics or if the existing tube needs replacement due to wear, gently pull the tube straight up from its socket. Align the pins of the new tube with the socket holes and carefully push it straight down until it is firmly seated. Ensure the device is powered off and unplugged before replacing the tube.
6.3 Storage
When not in use for extended periods, store the U4 in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
- No Power: Ensure the 12V power adapter is securely connected to both the U4 and a working power outlet. Check the power switch position.
- No Sound Output:
- Verify the correct input (USB or Bluetooth) is selected using the 'SELECT' switch.
- Check the volume knob position; ensure it's not at minimum.
- Confirm headphones or external speakers are properly connected and powered on.
- If using USB, ensure your computer's audio output is set to the U4.
- If using Bluetooth, ensure your source device is paired and connected to the U4.
- Bluetooth Connection Issues:
- Ensure the Bluetooth antenna is securely attached.
- Move your source device closer to the U4 to reduce interference.
- Try unpairing and re-pairing the U4 from your source device's Bluetooth settings.
- Ensure no other devices are actively connected to the U4 via Bluetooth.
- USB DAC Not Recognized:
- Ensure the USB cable is securely connected to both the U4 and your computer/device.
- Try a different USB port on your computer.
- Restart your computer/device.
- While the U4 is generally plug-and-play, ensure your operating system is up-to-date.
- Distorted Sound:
- Reduce the volume on both the U4 and your source device.
- Check audio cables for damage or loose connections.
- Ensure the input signal is not overdriven.
- If using Bluetooth, try moving closer to the unit or reducing other wireless interference.
8. Specifications
| Feature | Specification |
|---|---|
| Audio Input | Bluetooth 5.0 / USB |
| Audio Output | Stereo RCA / 3.5mm AUX / 3.5mm Headphone Jack |
| Bluetooth Chip | QCC3008 (supports APT-X, APTX-LL) |
| Decoding Chip | TDA1543 |
| USB Chip | PCM2704 (supports 16Bit 48KHz transmission) |
| Headphone Amp Chip | MAX9722 |
| Signal to Noise Ratio (SNR) | >99 dB |
| Dynamic Range | >99 dB |
| Amp Rated Power Output | 300mW |
| Amp Impedance | 16-600 ohms |
| Distortion (THD+N) | 0.004% (RL > 10 kΩ) / 0.020% (RL = 32 Ω) |
| Color | Black |
| Dimensions (L*W*H) | 97*77*32mm / 3.82*3.03*1.26in |
| Net Weight | 250g / 0.55lb |
| Package Weight | 470g / 1.04lb |
9. User Tips
- Tube Rolling: The 6N3 vacuum tube is easily replaceable. Experimenting with different compatible tubes can alter the sound signature, allowing for personalized audio tuning.
- USB DAC Compatibility: While the USB DAC function is generally plug-and-play across Windows, Mac, and Linux, ensure your operating system is updated for optimal performance. For Android devices, verify OTG (On-The-Go) functionality is enabled if needed.
- Component Verification: The U4 explicitly uses the TDA1543 decoding chip. If you have concerns about component authenticity or performance, refer to the internal architecture diagram and specifications provided.
10. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.