Introduction
Thank you for choosing the ZoeRax Multi-function Network Cable Crimper. This tool is designed for fast and reliable modular-crimp connector installation across various voice and data applications. It supports RJ45, RJ12, and RJ11 connectors, including Cat5, Cat5e, Cat6, Cat6a, and Cat7 Ethernet cables, both UTP and STP types. This manual provides essential information for safe and effective use of your crimper.
Safety Information
- Do not use for live working to prevent electric shock.
- The blade and crimping parts are sharp; do not touch.
- Keep fingers out of the blade and crimping die during operation.
Setup
- Inspect the Product: Upon receipt, carefully inspect the crimper for any physical damage. Ensure all components are intact.
- Confirm Compatibility: Verify that the crimper is compatible with the type of network connectors and cables you intend to use (RJ45, RJ12, RJ11, Cat5, Cat6, Cat7).
- Understand Tool Components: Familiarize yourself with the crimper's parts as shown in the diagram below.

Operating Instructions
The ZoeRax crimper supports various connector types and features a built-in pass-through blade and a Cat7/Cat5 adjustment mode.
General Crimping Process
- Prepare the cable by stripping the outer jacket and arranging the wires according to the desired wiring standard (e.g., T568A or T568B).
- Insert the prepared wires into the modular plug, ensuring they reach the end.
- Place the modular plug into the appropriate crimping cavity on the tool.
- Squeeze the handles firmly until the crimping cycle is complete. The tool's recoil spring will return it to the ready position.
Cat7 and Shielded Connector Crimping
This tool is specifically designed to crimp Cat7 shielded connectors, including the metal clip on the plugs for enhanced grounding.

Cat7 to Cat5 Adjuster Mode
The crimper features an adjustable mode to optimize crimping for different cable categories:
- Cat7 Mode: For Cat7 shielded plugs crimping.
- Cat5 Mode: For Cat5e and Cat6 plugs crimping.
To switch between modes, use a screwdriver to loosen the adjuster and move it up or down to the desired setting.

Video Demonstration
Watch the official product video for a visual guide on using the crimper for various connector types, including Cat7, shielded, and pass-through connectors.
Maintenance
- Cleaning: After each use, wipe down the tool with a clean, dry cloth to remove any debris or wire fragments.
- Lubrication: Periodically apply a small amount of light machine oil to the pivot points and moving parts to ensure smooth operation.
- Blade Inspection: Regularly check the cutting and stripping blades for sharpness and damage. Replace if dull or chipped (replacement blades are often included as a gift).
- Storage: Store the crimper in a dry, clean environment to prevent rust and corrosion.
Troubleshooting
- Poor Crimp Quality: Ensure the cable wires are fully inserted into the connector and that the correct crimping mode (Cat5/Cat7) is selected for your cable type. Apply firm, even pressure during crimping.
- Difficulty Cutting/Stripping: Check if the blades are clean and sharp. If dull, replace them. Ensure the cable is properly positioned in the stripping slot.
- Tool Jams: Do not force the tool. Inspect for any foreign objects or wire fragments obstructing the mechanism. Clean thoroughly.
- General Malfunction: If the tool exhibits abnormal functionality not covered here, contact customer support for assistance.
Specifications
| Feature | Description |
|---|---|
| Brand Name | ZoeRax |
| Model Number | ZTMPSCAT7BK |
| Origin | Mainland China |
| Certification | CE |
| Supported Connectors | RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C, 6P2C) |
| Cable Compatibility | Cat3, Cat4, Cat5, Cat5e, Cat6, Cat6a, Cat7 (UTP/STP) |
| Special Features | Pass-Through Crimping, Shielded Connector Crimp, Cat7/Cat5 Adjuster, Built-in Stripper/Cutter |
| Material | High-Carbon Tool Steel |
| Dimensions (Approx.) | Length: 13.5 cm (5.31 in), Width: 6.8 cm (2.68 in), Height: 3.5 cm (1.38 in) |
| Weight (Approx.) | 0.26 kg |

User Tips
- This tool is praised for its compact size and ability to crimp Cat5, Cat6, and Cat7 connectors, including cutting excess conductor wires.
- The built-in pass-through blade simplifies the process by allowing wires to pass through the connector before trimming, ensuring a flush cut.
- Remember to adjust the Cat7/Cat5 switch using a screwdriver to match the cable category you are working with for optimal crimping results.
Warranty and Support
The ZoeRax Multi-function Network Cable Crimper comes with a 12-month warranty. For any issues, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
Frequently Asked Questions (FAQ)
- Q: Does this tool also strip the wire?
- A: Yes, the crimper includes a built-in stripping/cutting mechanism, and often comes with additional blades for this purpose.
- Q: Can this tool crimp CAT6A connectors?
- A: Yes, the tool is designed to support Cat6a shielded connectors, as well as Cat5e, Cat6, and Cat7.
- Q: What should I do if the crimp quality is poor?
- A: Ensure the wires are correctly aligned and fully inserted into the connector. Also, verify that the Cat7/Cat5 adjuster is set to the appropriate mode for your cable type.