A-BF SS-305MP

Contents

A-BF SS-305MP Programmable DC Power Supply Instruction Manual

Model: SS-305MP

Brand: A-BF

1. Introduction

The A-BF SS-305MP is a high-precision, programmable DC power supply designed for a wide range of applications including laboratories, educational institutions, electrical maintenance, and DIY electronics projects. This compact unit features a 4-digit color LED display for clear readouts of voltage, current, and power, along with convenient memory functions for frequently used settings. Its robust design incorporates multiple protection mechanisms to ensure stable and safe operation.

2. Safety Information

  • Always ensure the power supply is properly grounded before use.
  • This device is intended for indoor use only. Avoid exposure to moisture or extreme temperatures.
  • Do not open the casing of the power supply. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Ensure the input voltage matches the specifications of your local power grid.
  • Do not exceed the maximum output voltage (32V) or current (5A) ratings.
  • Keep the ventilation openings clear to prevent overheating.
  • Disconnect power before making any connections or disconnections to the output terminals.
  • The product is FCC & CE certified, indicating compliance with relevant safety standards.

3. Package Contents

Please check the package for the following items:

  • A-BF SS-305MP Programmable DC Power Supply Unit
  • Power Cord
  • Output Cables (Banana plug to Alligator clips)
  • User Manual

4. Product Overview

The A-BF SS-305MP features a user-friendly front panel and efficient cooling system.

Front Panel Controls and Display

Front view of A-BF SS-305MP DC Power Supply with display and controls

Figure 4.1: Front Panel of the SS-305MP Power Supply

  • 4-Digit Color LED Display: Shows Voltage (green), Current (red), and Power (yellow) with high precision (0.01V and 0.001A resolution). Indicators for Constant Voltage (C.V.) and Constant Current (C.C.) modes are also present.
  • Rotary Knob: Used for fine and coarse adjustment of voltage and current. Pressing the knob confirms selections.
  • M1, M2, M3 Buttons: Memory buttons for storing and recalling frequently used voltage/current settings.
  • OCP (Over Current Protection) Button: Activates and sets over current protection.
  • OVP (Over Voltage Protection) Button: Activates and sets over voltage protection.
  • ON/OFF Button: Controls the output power to the terminals.
  • 'U' Button: Selects voltage adjustment mode.
  • 'I' Button: Selects current adjustment mode.
  • Output Terminals: Red (+) and Black (-) terminals for connecting the load.

Cooling and Protection

Internal view of the power supply showing circuit board and cooling fan, highlighting multiple protection features.

Figure 4.2: Internal Components and Protection Features

The power supply is equipped with special left and right vents and an internal cooling fan to ensure efficient heat dissipation and prevent overheating. It includes multiple protection features:

  • Over Current Protection (OCP)
  • Over Voltage Protection (OVP)
  • Short Circuit Protection
  • Overload Protection
  • Over-heating Protection

5. Setup

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
  2. Placement: Place the unit on a stable, level surface in a well-ventilated area. Ensure there is adequate space around the side vents for airflow.
  3. Power Connection: Connect the provided power cord to the power input socket on the rear of the unit, then plug it into a suitable grounded AC power outlet.
  4. Output Connection: With the power supply turned OFF, connect the load to the red (+) and black (-) output terminals using the provided output cables. Ensure correct polarity.

6. Operating Instructions

6.1 Basic Operation

  1. Power On: Press the main power switch located on the front panel. The display will illuminate.
  2. Adjusting Voltage:
    • Press the 'U' button to enter voltage adjustment mode.
    • Rotate the rotary knob to adjust the desired voltage value.
    • Press the rotary knob to confirm the setting.
  3. Adjusting Current:
    • Press the 'I' button to enter current adjustment mode.
    • Rotate the rotary knob to adjust the desired current value.
    • Press the rotary knob to confirm the setting.
  4. Output ON/OFF: Press the green ON/OFF button to enable or disable the power output to the terminals. The display will show 'OFF' when disabled.

6.2 Memory Function (M1/M2/M3)

The power supply allows you to store and recall up to three sets of voltage and current values.

  1. To Save a Value:
    • Set the desired voltage and current using the 'U' and 'I' buttons and the rotary knob.
    • Long press one of the memory buttons (M1, M2, or M3) until its indicator light turns on. This confirms the value has been successfully saved.
  2. To Recall a Value:
    • Short press the desired memory button (M1, M2, or M3). The saved voltage and current values will be loaded, and the button's indicator will light up.

6.3 Locking Buttons

To prevent accidental changes to settings, you can lock the control buttons.

  1. To Lock: Long press the rotary knob until a padlock icon appears on the display. In this locked state, only the output ON/OFF button remains functional.
  2. To Unlock: Long press the rotary knob again until the padlock icon disappears.

6.4 Over Current Protection (OCP) and Over Voltage Protection (OVP)

These functions protect your load and the power supply from damage due to excessive current or voltage.

  1. Setting OCP/OVP: Press the OCP or OVP button. Rotate the knob to set the desired protection limit. Press the knob to confirm.
  2. If the output current or voltage exceeds the set limit, the protection will trigger, and the output will be shut off.

6.5 Operational Demonstration Video

Video 6.1: Demonstration of Voltage/Current Adjustment, Button Lock, and Memory Functions

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power supply. Do not use abrasive cleaners or solvents.
  • Ventilation: Regularly check that the ventilation openings on the sides are not obstructed by dust or debris. Proper airflow is crucial for preventing overheating.
  • Storage: When not in use for extended periods, store the power supply in a dry, dust-free environment, away from direct sunlight and extreme temperatures.

8. Troubleshooting

ProblemPossible CauseSolution
Digital display does not work properly or shows incorrect values.Incorrect input voltage; internal short circuit or other fault.1. Check the input voltage to ensure it is functioning correctly. 2. If the power is derived into the product at a nominal voltage, the fuse may have burned out in case of a short circuit or other trouble. Contact support if issue persists.
No output power.Output is turned off; OCP/OVP triggered; loose connections.1. Press the ON/OFF button to enable output. 2. Check if OCP or OVP indicators are lit; reset if necessary. 3. Ensure all output connections are secure.
Unit overheats.Blocked ventilation; excessive load.1. Ensure vents are clear of obstructions. 2. Reduce the load on the power supply. 3. Operate within the specified temperature range.

9. Specifications

ParameterValue
Output Voltage0-32V
Output Current0-5A
Voltage Load Regulation≤0.1%+5mV
Voltage Line Regulation≤0.01%+5mV
Current Load Regulation≤0.2%+3mA
Current Line Regulation≤0.2%+3mA
Operating Range0℃ to 40℃, ≤80% RH
Suggested Operating Range23 ℃ ± 5 ℃
Weight1.95KG (approx. 4.3 lbs)
Size (L x W x H)80 x 150 x 230 mm (approx. 3.14 x 5.9 x 9 inches)

10. User Tips

  • Understanding Voltage and Current Limits: The SS-305MP provides a maximum output of 32V and 5A. When setting parameters, ensure your desired values are within these ranges.
  • Power Plug Compatibility: Be aware of different power plug types (e.g., UK, US, EU). Ensure you select the correct plug type for your region to avoid compatibility issues.
  • High Precision Readout: The 4-digit display offers precise readings. For critical applications, it's always good practice to verify with a calibrated multimeter.

11. Warranty and Support

The A-BF SS-305MP comes with 36-month support for customers who register for the warranty program. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer's customer support directly.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.