1. Product Overview
This manual provides essential information for the installation, operation, and maintenance of your MAXPEEDINGRODS 2-barrel carburetor. This aftermarket replacement part is designed to ensure proper engine function, improve fuel efficiency, and potentially add 5-10% horsepower by mixing air and gasoline in a correct ratio.



2. Specifications
| Feature | Detail |
|---|---|
| Type | Hand Choke / Manual |
| Bore Size | 27.8mm / 27.8mm (Same bore size) |
| Material | Heavy-duty zinc alloy construction |
| Specific | 2 Barrel |
| Input Voltage | DC 12V |
| Item Weight | 3kg (Product Prop PC) / 1.86Kgs (Desc HTML) |
| Item Length | 54cm |
| Item Width | 35cm |
| Item Height | 45cm |
| Package Size | 20cm x 18cm x 16cm |
| Manufacturer Part Number | 24034 |
| Interchange Part Number | 21100 |
| Other Part Number | 21100-24034, 21100-24035, 21100-24045 |
| OEM NO. | 21100-24034, 21100-24035, 21100-24045 |


3. Fitment
This carburetor is compatible with the following vehicle models:
- For Toyota Corolla 3K 4K (1968-1978)
- For Toyota Corolla (1974-1981)
- For Starlet (1974-1978)
- For Trueno (1974-1981)
- For Suzuki Samurai Assembled (1986-1988) - Note: Some slight modifications may be required for installation on Suzuki Samurai models.

4. Package Contents
The package includes the following items:
- 1 x 2-barrel carburetor
- 1 x Threaded bushing for the gasoline inlet
5. Setup and Installation
Important: Professional installation is highly recommended. No specific installation instructions are included with the product.
- Preparation: Before installing the carburetor, ensure that the oil channels and air filters are thoroughly cleaned. Use only clean fuel. Failure to do so may result in blocked oil channels and improper function.
- Placement: The carburetor is designed to be placed in the intake pipe between the air filter and the engine of the car.
- Direct Installation: This carburetor is designed for direct installation without the need for adjustments, assuming proper fitment and preparation.


6. Operating Principles
The carburetor's primary role is to precisely mix air and fuel to create a combustible mixture for the engine. A properly functioning carburetor ensures:
- Consistent engine power output.
- Optimal fuel efficiency.
- Smooth engine starting and operation.
This carburetor is designed to restore or enhance these functions, addressing common issues associated with worn or faulty carburetors.
7. Maintenance
Regular maintenance is crucial for the longevity and optimal performance of your carburetor:
- Cleanliness: The oil channels of carburetors can become blocked if not regularly cleaned. Ensure these channels are kept clear.
- Air Filter: Regularly inspect and clean or replace your air filter to prevent contaminants from entering the carburetor.
- Fuel Quality: Always use clean fuel. Contaminated fuel can lead to blockages and damage to the carburetor's internal components.
8. Troubleshooting
If you experience issues after installing or while using the carburetor, consider the following common problems and their potential causes:
- Engine Lack of Power: This can be caused by an incorrect air-fuel mixture, often due to clogged jets or passages within the carburetor.
- Low Fuel Efficiency: An overly rich fuel mixture or improper float level can lead to excessive fuel consumption.
- Engine Backfiring: This may indicate a lean fuel mixture or ignition timing issues.
- Engine Overheating: A lean fuel mixture can cause the engine to run hotter than normal.
- Hard Starting: Issues with the choke mechanism, fuel delivery, or a clogged idle circuit can make starting difficult.
Resolution: Many of these problems can be resolved by ensuring the carburetor's oil channels are clean and that clean fuel is used. If issues persist, professional diagnosis and adjustment may be required.
9. User Tips
- Verify Part Numbers: Always confirm your old part number and car engine details before purchasing to ensure compatibility.
- Suzuki Samurai Fitment: For Suzuki Samurai models (1986-1988), be prepared for potential slight modifications during installation.
- Pre-Installation Cleaning: A common issue leading to poor performance is neglecting to clean the oil channels and air filters before installation. Always perform this step.
10. Warranty and Support
This product comes with a 2-year warranty covering any manufacturing defects. For warranty claims or technical support, please contact the seller directly with your purchase details.