1. Product Overview
The Hcalory All-in-One Diesel Air Parking Heater is an independent heating device designed for various vehicles and environments. Originally used to preheat car engines and cabins in cold weather, it now serves a wider range of applications including heating tents, indoor spaces, and RVs, enhancing comfort for users during travel and living.
This heater features an upgraded aluminum body (2025 model) for improved heat output and fuel efficiency. It offers multiple control modes including smart APP control, remote control, and an LCD panel.
Video: Hcalory Diesel Heater Overview and Features.

Image: The Hcalory diesel heater is suitable for various applications including vans, boats, camping, and home use.

Image: The heater is CE, FCC, and RoHS certified, and includes overheating, short circuit, reverse connection, and overvoltage protection.
2. Principles of Operation
2.1 Heat Source
Upon starting, the ignition plug heats for 1-3 minutes. The fan then delivers air to the combustion chamber, and the diesel pump injects diesel. The atomized diesel mixes with air and ignites upon contact with the hot ignition plug, generating significant heat. High-temperature exhaust gases are discharged through the exhaust outlet.
2.2 Heating Process
Heat from the combustion chamber is rapidly transferred to an aluminum heat exchanger and dissipated into the warm air duct via aluminum fins. An external fan blows air around the heat exchanger, and the heated air is expelled through the warm air outlet.

Image: Diagram illustrating an 18% increase in combustion efficiency and fuel savings compared to other models.
2.3 Control Mechanisms
The device features an embedded controller. Users can operate it via a connected switch panel, checking status, controlling settings, and scheduling operations. Remote control and a dedicated Hcalory mobile application are also available for remote management.

Image: Illustration of the three control modes: 10-speed control, smart dual-altitude mode, 3 sets of timers, automatic start/stop, adjustable air-oil ratio, Bluetooth connectivity (32ft), and remote control (98ft).
3. Internal Key Parts Terminology
Understanding the internal components is crucial for maintenance and repair. Refer to the diagram below for key parts:

Image: Exploded view of the diesel heater showing Control box, Ignition plug, Safety plug, Air inlet, Air fan, Flame retardant impeller, Combustion chamber, Heating zone, and Air outlet.
4. Setup and Installation
4.1 Parts List Confirmation
Before installation, ensure all components are present:

Image: Diagram showing all included parts: (01) Host, (02) Fixture Accessories Set, (03) Exhaust silencer, (04) Exhaust pipe, (05) Intake pipe, (06) Fixture Accessories Set, (07) Air Outlet Pipe, (08) Air Filter, (09) LCD Switch, (10) Remote control, (11) Manual, (12) AC-DC power supply (Optional purchase), (13) Controller extension cord.
4.2 Installation Instructions
The installation process is simplified. The primary steps involve installing the exhaust pipe and connecting the AC-DC power supply (if applicable). Ensure the exhaust pipe extends outdoors to safely expel combustion exhaust gases.

Image: Detailed installation diagram showing connections for Host, Air Outlet Pipe, Hose hoops, Drill nail, Exhaust silencer, Exhaust pipe, Intake pipe, Air filter, and power supply.
Important Notes:
- The discharged exhaust gas can reach temperatures as high as 400°C. Keep it away from pets and children.
- Maintain adequate distance from the ground to prevent damage to flooring or lawn.
- The exhaust pipe operates at very high temperatures! During installation, use, maintenance, and disposal, ensure no flammable or explosive materials are near the exhaust pipe to prevent fire.
- Use a 12V or 24V DC power supply, or an AC to DC adapter. The discharge current should be greater than 15A (the device needs to heat the glow plug when starting, and the operating current may reach 12A and last for 3-5 minutes).
5. Safety Instructions
Read all safety warnings, instructions, illustrations, and manuals provided with this diesel heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not replace important parts of the diesel heater without authorization. Consult customer service for correct product specifications and models for repairs or replacements.
- Do not use the heater in areas where flammable vapors or dust may form, such as fuel depots, carbon depots, timber depots, granaries, diesel/gas stations. Keep away from fuel tanks, compression tanks, fire extinguishers, clothing, and other flammable items.
- Use the machine safely and understand its hazards. Children are not allowed to play with this machine. Cleaning and maintenance must not be carried out unsupervised by children.
- Do not approach flammable materials when the exhaust pipe is working, as its temperature is very high! Ensure no flammable or explosive materials are around the exhaust pipe during installation, use, maintenance, and scrapping.
- Ensure proper ventilation and keep pipes open. During installation, use, maintenance, and disposal, leave a ventilated area around the equipment to prevent carbon monoxide poisoning. Place the metal exhaust pipe outdoors to prevent exhaust gases from entering the room.
- Do not use the heater in an enclosed or unventilated place.
- Turn off the heater when adding diesel.
- Do not cut off the power supply directly after turning off the heating program. The equipment requires 3-5 minutes for extinguishing and cooling. Cutting power directly can cause abnormal shutdown and negatively impact the next start.
- If the fuel system is leaking, contact after-sales personnel for parts and guidance.
- The ignition plug requires a relatively large current (12A or greater for 12V) to heat during startup. After successful ignition, the equipment only needs 1-4A to operate continuously.
- The ignition point of cotton/sponge is 150°C, paper is 130°C, cloth is 270°C, and diesel oil is 220°C. The hot air outlet can exceed 150°C, and the exhaust pipe outlet can exceed 270°C.
6. Control Panel Overview and Operation
6.1 Control Panel Layout

Image: Diagram of the LCD control panel with numbered buttons and display areas.
- 1. Add key: Increase value.
- 2. On/off key: Power on/off.
- 3. Reduce key: Decrease value.
- 4. OK key: Confirm selection.
- 5. Set key: Enter settings menu.
- 6. Altitude: Altitude setting indicator.
- 7. Clock display: Shows current time.
- 8. Power bar: Indicates power level.
- 9. Display data and parameters: Shows various operational data.
- 10. Host shape: Visual representation of the unit.
6.2 Icon Meanings
| Icon | Meaning |
|---|---|
| °C / °F | Temperature Unit |
| Fan icon | Fan |
| Sensor failure icon | Sensor failure |
| Power failure icon | Power failure |
| Ignition plug icon | Ignition plug |
| Oil pump icon | Oil pump |
| Bluetooth symbol | Bluetooth symbol |
| High altitude state icon | High altitude state |
| Timed alarm clock icon | Timed alarm clock |
| CO icon | Carbon monoxide alarm |
| High temperature alarm icon | High temperature alarm |
| Fault prompt icon | Fault prompt |
| (A) icon | Automatic start/stop |
| Ventilation state icon | Ventilation state |
| Manual mode icon | Manual mode |
| Constant temperature mode icon | Constant temperature mode |
6.3 Operating Instructions
6.3.1 On/Off Operation
- Start-up: Long press the power key for 2 seconds to start the device.
- Shutdown: In the ON state, long press the power key for 2 seconds. The device will enter a shutdown cooling process and display "OFF". Wait until the machine displays the shutdown status before disconnecting power. Forcing power off prematurely can damage components.
6.3.2 Manual Mode Operation
Manual mode has 10 gears (H1-HH10). HH10 is maximum power. Use the ▲ or ▼ buttons to adjust gears. The display will show the gear setting.
6.3.3 Constant Temperature Mode Operation
- Use the ▲ or ▼ buttons to set the temperature value (0-40°C). The display will show the temperature setting.
- Long press the settings button for 2 seconds to switch between manual and constant temperature modes.
6.3.4 Automatic Start and Stop Operation
When powered on and in constant temperature mode, short-press the power key to enable automatic start-stop (indicated by the (A) icon). Short-press again to disable it. Default turn-on is -4°C, turn-off is +3°C. For example, setting to 24°C will shut down at 27°C and turn on at 20°C.
6.3.5 Ventilation Operation
- In shutdown state, hold down the settings button for 2 seconds to enter ventilation mode. The display will show the fan icon.
- Use the ▲ or ▼ buttons to adjust fan speed.
- Long press the power key or settings button for 2 seconds to exit ventilation mode.
6.3.6 Switch Display Data
In the ON state, short press the OK key to cycle through display data: housing temperature -> working voltage -> ambient temperature -> current gear (or current set temperature).
6.3.7 Switch Temperature Units
Simultaneously hold down the power key and ▲ key for 2 seconds to switch between °C/°F.
6.3.8 Manual Oiling Operation
Caution:
In shutdown state, simultaneously press the ▲ and ▼ keys for 2 seconds to manually control the oil pump. Release to stop pumping oil.
6.3.9 Altitude Operation
Simultaneously hold down the settings key and OK key for 2 seconds to activate the first altitude mode (indicated by an icon). Repeat to activate the second altitude mode. The device adjusts the air-fuel ratio based on altitude. Repeat again to turn off altitude consideration.
Models HC1-H and HC1-S support SMART DUAL-ALTITUDE MODE (2,500m/5,000m) with automatic air-fuel optimization. Models BHH-3 and HBS-3 support 5 Stage Altitude Mode for 1000-5000m elevations, dynamically calibrating air-fuel mixture.

Image: Diagram illustrating the Smart Dual-Altitude Mode with 2500m and 5000m settings and altitude performance graph.
6.3.10 Timed On/Off Operation
Long press the OK key and ▼ key simultaneously for 2 seconds. If the timer is off, it will turn on and enter the timing setting interface (indicated by a clock icon). "CLOS" indicates shutdown time, "OPEN" indicates startup time. If the timer is on, all timers will be turned off.
- Use ▲ or ▼ to adjust time (00:00-23:59).
- Press the power key to switch adjustment digits.
- Press the OK key to save.
- If setting startup time, switch to shutdown time setting.
- Settings save and exit after 10 seconds of inactivity.
6.3.11 Clock Synchronization
Long press the OK key for 2 seconds to enter clock adjustment ("CLOC").
- Use ▲ or ▼ to adjust time (00:00-23:59).
- Press the power key to switch adjustment digits.
- Press the OK button to confirm time and enter week setting.
- Press the settings button to enter week setting.
- Exit after 10 seconds of inactivity.
6.3.12 Remote Control Matching
In shutdown state, simultaneously press the power key and ▼ key for 2 seconds to display HFA1.
- Use ▲ or ▼ to adjust the fourth digit (remote control number 1-4).
- Select remote control number, press any button on the remote to code. Exit after successful coding.
- Press the settings key to exit remote control code.
- Remote control requirements: 433MHZ frequency band, 24-bit code.
6.3.13 Screen Brightness Adjustment
In ON state, long press ▲ and ▼ for 2 seconds. "AIRHEATER" icon will flash. Use ▲ or ▼ to adjust brightness. Long press ▲ and ▼ again for 2 seconds to confirm. Settings confirm automatically after 10 seconds of inactivity.
6.3.14 Bluetooth Password Check
Simultaneously press OK and ▲. The screen displays a 4-digit Bluetooth connection password (initial password "0000").
6.3.15 Bluetooth Password Initialization
In shutdown state, simultaneously press OK and power key for 2 seconds to enter password input ("3333").
- Use ▲ or ▼ to adjust number size.
- Press the power key to switch adjustment digits.
- Press OK to confirm initialization.
- Press the settings key to cancel.
6.3.16 Oil Pump Frequency Adjustment (Use with Caution)
In shutdown state, simultaneously press OK and settings key for 2 seconds to enter password input ("3638").
Warning:
After entering password, "1-2.0" is displayed (1st oil pump frequency 2.0, 10th oil pump replaced by A).
- Use ▲ or ▼ to increase/decrease frequency.
- Press the power key to switch oil pump gear.
- Press OK to confirm.
- Press the settings key to cancel.
6.3.17 Oil Pump Frequency Initialization
In shutdown state, simultaneously press OK and power key for 2 seconds to enter password input ("6666").
7. App Operation Instructions
If your heater model includes Bluetooth, you can control it via the Hcalory mobile application.
7.1 How to Download the App
Android users can download the installation package from the Google Play Store. Apple users can download from the App Store or scan the QR code below.

Image: QR Code for Android App.
For Android

Image: QR Code for iOS App.
For iOS
7.2 App Connection and Control
- Adding a Device: Upon first opening the app, click the "+" sign to add your device.
- Bluetooth Authorization: When searching for devices, enable Bluetooth and authorize precise location information. Refusing authorization may prevent the app from finding nearby devices.
- Discovering Devices: Allow Hcalory to discover and connect to nearby devices. If the Bluetooth interface doesn't appear, click the Bluetooth icon to search for devices named "hcalory". Note: Only one phone can be connected at a time.
- Operating Modes: After successful connection, the app allows various operations:
- Start Heating: Click the [heating button] to start normal heating. Choose between temperature mode (intelligent gear control based on target temperature, suitable for indoors) or gear mode (fixed gear, suitable for open areas/poorly insulated tents).
- Fan Mode: The fan runs independently without combustion. Can be used as a fan or exhaust fan.
- Plateau Mode: Due to lower air pressure and oxygen at high altitudes, the air-fuel ratio differs. Activating plateau mode simulates high-altitude environments and adjusts oil pump frequency. Recommended for 2000-5000 meters above sea level. Prolonged use above 4000 meters without spare parts is not recommended.
- Scheduled Timing: Set multiple timers. The heater must remain powered on for timed functions to execute.
- Other Settings: Adjust language, temperature units, and provide feedback via email.

Image: App interface showing standby mode.

Image: App interface showing blow mode.

Image: App interface showing Smart Dual-Altitude Mode settings, allowing selection between 2.5km and 5.0km altitude modes.
8. Maintenance
Regular maintenance ensures optimal performance and longevity of your Hcalory Diesel Air Parking Heater.
- Filter Cleaning: Regularly check and clean the filter screen next to the ignition plug. Replace if necessary.
- Fuel System Check: Ensure the oil pump is effectively spraying fuel. Check for oil shortages, low-temperature solidification of oil, oil line blockages, or bent oil pipes.
- Air Ducts: Ensure all air ducts are unobstructed, with "no bends, no pressure, no blockages" to maintain heating efficiency.
- Sensors: Verify that the housing temperature sensor is in full contact with the housing and that the pressure spring is strong. Check if any sensors are damaged.
- Fan Impeller: Check if the fan impeller is stuck or if the gap between the magnet on the wind wheel and the Hall sensor is too large.
- Ignition Plug: Check for aging or damage to the ignition plug.
9. Troubleshooting
Refer to the table below for common fault codes and their corresponding solutions:
| Fault Code | Failure Cause | Method of Disposition |
|---|---|---|
| E021 | Power supply voltage is too low | 1) Check if battery connection wire is damaged or plug is secure. 2) Check if fuse is aging. |
| E022 | Power supply voltage is too high | Check battery output voltage range. |
| E023 | Abnormal power supply voltage | Check battery output voltage range. |
| E031 | Ignition plug is open | 1) Check if ignition plug connection wire/plug is loose or broken. 2) Check if ignition plug connection plug is loose. 3) Give ignition plug separate power connection to check for damage. |
| E032 | Ignition plug is short circuit | 1) Check if ignition plug connection wire is short circuit. 2) Ignition plug is damaged or motherboard reads wrong. |
| E041 | Oil pump is open | 1) Check if connecting wires/connectors of oil pump are damaged, loose or broken. 2) Check if oil pump is damaged. |
| E042 | Oil pump short circuit | 1) Check if connection line of oil pump is short circuit. 2) Check if oil pump is blocked or damaged. |
| E05 | High temperature alarm (case > 230°C) | 1) Check if cold air intake is blocked. 2) Check if hot air outlet pipe is bent or blocked. 3) Check if fan is running normally. 4) Check if sensor is damaged. |
| E061 | Motor open circuit | 1) Check if motor connection wire is broken. 2) Check if motor connection plug is loose. 3) Connect motor to power supply separately and check if it rotates. |
| E062 | Motor short circuit | 1) Check if connecting wire of motor is short circuit. 2) Motor damage or motherboard reads wrong. |
| E063 | Fan speed is abnormal | 1) Check if impeller is stuck. 2) Check if gap between magnet on wind wheel and Hall sensor is too large. |
| E07 | Master board communicates abnormally with remote control switchboard | 1) Check if connection port of remote control switch is loose. 2) Check if connection line (blue) of remote control switch is broken. |
| E08 | Flameout | 1) Check for oil shortage, low-temperature solidification, oil line blockage, bent oil pipe, too many steam drums, or oil pump jam. 2) Check if oxygen intake and exhaust air duct is smooth. 3) Check if housing temperature sensor is in full contact and pressure spring is strong. 4) Check if sensor is damaged. |
| E091 | Temperature sensor is open | 1) Check if temperature sensor connection wire/plug is damaged or loose. 2) Check if sensor is damaged. |
| E092 | Temperature sensor is short circuit | 1) Check if temperature sensor connection line is short circuit. 2) Check if sensor is damaged. |
| E10 | Startup was unsuccessful | 1) Housing temperature too high, cannot cool after 3 mins. 2) White smoke from exhaust: check/clean/replace filter, check oil pump spray, check ignition plug aging. 3) Little/no white smoke: check for missing/frozen/blocked oil, stuck/damaged oil pump, smooth combustion channels, damaged ignition plug, large inner wind wheel gap. 4) Normal ignition but still reports failure: check housing temperature sensor contact and pressure spring, check sensor. |
10. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Hcalory |
| Power | 5-8KW |
| Voltage | 12V, 24V, 220-240V |
| Fuel | Diesel |
| Switch Type | LCD Switch |
| Material | Plastic and Metal |
| Item Type | Heating & Fans |
| Item Diameter | 7.5cm |
| Special Features | Heating |
| External Testing Certification | CE |
| Certification | CE |
| Origin | Mainland China |
| 2025 Upgrade | Support automatic start and stop |
| Fuel Consumption | 0.12 L/h - 0.46 L/h |
| Fuel Tank Capacity | 5L |
| Remote Control Distance | 50-100m |
| Working Ambient Temperature | -40℃ to 40℃ |
| Function | Parking heating, engine preheating |
11. User Tips
Based on user feedback, here are some tips for an improved experience:
- Exhaust Elbow: Some users have noted that the provided exhaust elbow might be too large or short, making it difficult to secure. Ensure a proper, secure fit to prevent exhaust leaks and potential hazards. Consider alternative solutions if the provided elbow is not suitable for your specific installation.
- Fuel Pump Noise: The fuel pump can produce a noticeable "tick, tick" sound. While some diesel heaters are quieter, this model might produce a louder sound. This is a common characteristic for some diesel heater pumps.
- Settings Complexity: The settings can be a little complicated initially. Refer to the manual's detailed operating instructions and the app guide for assistance. Take your time to familiarize yourself with each function.
12. Warranty and Support
For after-sales technical support, questions about Hcalory products, or difficulties with adjustments or repairs, please contact Hcalory customer service. They can provide more detailed instructions or operational videos.
- Email: hcalory@hcalory.com
- User Manual PDF: A detailed user manual is available for download: View User Manual (PDF).