1. Introduction
Thank you for choosing the Mestek Digital Infrared Thermometer. This device is designed for safe, non-contact surface temperature measurement in various industrial and home applications. It features a high-precision sensor, HD color screen, and multiple advanced functions to ensure accurate and reliable readings. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Safety Information
- WARNING: This product is not suitable for measuring human body temperature (forehead, baby, etc.). It is intended for industrial and surface temperature measurements only.
- Do not aim the laser directly at the eyes or indirectly at the eyes through reflective surfaces. The laser is a Class 2 laser (<1mW/620-690nm).
- Do not measure through transparent surfaces such as glass or plastic. The device measures surface temperature, not the temperature of objects behind transparent barriers.
- If the ambient temperature changes significantly or suddenly, allow the thermometer to stabilize for at least 30 minutes before use to ensure accurate readings.
- When measuring boiling liquids, ensure that steam or smoke does not contact the temperature sensing area. Maintain a measuring angle of approximately 45-60 degrees for optimal accuracy.
- Keep the device away from strong electromagnetic fields.
3. Product Overview
Key Features:
- High Precision Measurement
- Adjustable Emissivity (0.1-1.0)
- HD Color Backlit Display
- High and Low Temperature Alarm (Red/Green LED & Buzzer)
- Object Distance Ratio: 12:1
- Unit Switching (°C/°F)
- Data Retention
- Automatic Sleep (30 seconds)
- Low Battery Prompt
- Optional Contact Temperature Probe (IR02B/IR02C models)
- Ambient Temperature, Humidity, Mildew, and Dew Point Measurement (IR02C model only)

Internal Components:
The thermometer incorporates industrial-grade components for enhanced performance and durability:
- High Precision Laser Indicating
- High Precision Sensor
- Aluminum Alloy Sensing Shell
- High-Speed Intelligent Chip

4. Setup
Battery Installation:
- Locate the battery compartment on the handle of the thermometer.
- Open the battery compartment cover.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Close the battery compartment cover securely.

USB Charging (for models with this feature):
Some models may support USB charging with an optional lithium battery. Connect a USB cable to the USB port on the device and a power source to charge.

5. Operating Instructions
Quick Measurement:
- Ensure batteries are installed.
- Point the thermometer's laser at the target object.
- Pull and hold the measuring trigger to start measurement. The temperature reading will appear on the HD color screen.
- Release the trigger to hold the reading (Data Retention).

Mode Settings:
Long press the 'MODE' button to cycle through various settings:
- High Temperature Alarm (HI): Adjust the upper temperature limit using the up/down buttons. If the measured temperature exceeds this value, a red LED will light up and an alarm will sound.
- Low Temperature Alarm (LOW): Adjust the lower temperature limit using the up/down buttons. If the measured temperature falls below this value, a green LED will light up and an alarm will sound.
- Emissivity (E): Adjust the emissivity value (0.1-1.0) to match the material being measured for improved accuracy. The default is 0.95.
- Unit Conversion (°C/°F): Switch between Celsius and Fahrenheit display.


Emissivity Adjustment:
Emissivity is crucial for accurate infrared temperature measurement. Different materials have different emissivity values. Adjust the 'E' setting to match the material you are measuring. Refer to the Emissivity Comparison Table below.

Contact Probe Measurement (IR02B/IR02C only):
For more precise contact temperature measurement, connect the included temperature probe to the designated port on the thermometer. Touch the probe tip to the surface of the object to be measured.

Environmental Measurement (IR02C only):
The IR02C model can display ambient temperature, ambient humidity, surface humidity, mildew temperature, and dew point temperature in real-time.

6. Application Scenarios
The Mestek Digital Infrared Thermometer is suitable for a wide range of applications, including but not limited to:
- Automotive maintenance (engine, air conditioning, air outlets)
- Home applications (oven, cooking, refrigeration)
- Industrial equipment monitoring
- HVAC system diagnostics
- Electrical troubleshooting
- Water and oil temperature measurement






7. Specifications
| Feature | IR03A | IR03B | IR02A | IR02B | IR02C |
|---|---|---|---|---|---|
| Temperature Range | -50~400°C | -50~600°C | -50~800°C | ||
| Object Distance Ratio | 12:1 | ||||
| Emissivity | 0.10~1.00 Adjustable (Default 0.95) | ||||
| Response Spectrum | 8~14 um | ||||
| Laser Positioning | Laser point indicates temperature sensing area | 12-point laser | |||
| Laser Class | <1mW/620-690nm Level 2 | ||||
| Response Time | <0.5s | ||||
| Temperature Difference Alarm | Freely set upper and lower alarm values | ||||
| Automatic Shut-down | 30 seconds | ||||
| Data Retention | Yes | ||||
| Operating Temperature | 0~40°C | 0~50°C | |||
| Storage Temperature | -10~60°C | -20~60°C | |||
| Battery | 1.5V*2 AAA battery (Not included) | ||||
| Accuracy | ±2°C | -50~0°C: ±3°C; 0~800°C: ±(1.5% reading + 2°C/4°F) | |||
| Resolution | N/A | 0.1°C | |||
| Inverted Color Screen | No | Yes | |||
| Temperature Probe | No | No | Yes | ||
| Ambient Temperature | No | Yes (-10~60°C) | |||
| Ambient Humidity | No | Yes (0%~100%RH) | |||
| Mildew/Dew Point | No | Yes | |||
| Size (L*W*H) | Approx. 150mm * 103mm * 33mm | ||||


8. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device casing. Do not use abrasive cleaners or solvents. Keep the lens clean and free of dust or debris.
- Storage: When not in use for extended periods, remove the batteries to prevent leakage. Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display.
9. Troubleshooting
- Inaccurate Readings:
- Check and adjust the emissivity setting to match the target material.
- Ensure the distance-to-spot ratio (12:1) is respected. Move closer to smaller objects.
- Allow the device to acclimate to significant ambient temperature changes (approx. 30 minutes).
- Ensure the lens is clean.
- No Display/Power On:
- Check battery installation and polarity.
- Replace with fresh batteries.
- If applicable, ensure the device is charged if using a rechargeable battery.
- Laser Not Working:
- Check battery level.
- Ensure the laser function is enabled in the settings (if applicable).
10. User Tips
- For best accuracy, always ensure the emissivity setting matches the material you are measuring. Common materials like wood, concrete, and painted surfaces often have an emissivity close to the default 0.95.
- Remember the 12:1 distance-to-spot ratio. This means that at 12 inches from the target, the measurement spot will be 1 inch in diameter. For smaller targets, get closer to ensure you are measuring only the desired area.
- Utilize the high and low temperature alarms for continuous monitoring in industrial settings or for specific tasks like cooking, where maintaining a temperature range is critical.
- If your model includes a contact probe (IR02B/IR02C), use it for highly accurate readings on solid surfaces or for liquids where direct contact is safe and feasible.
11. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
12. Product Demonstration Video
Watch this video for a quick introduction and demonstration of the thermometer's features and settings.