Ambition Ninja Professional Wireless Tattoo Pen Machine User Manual

1. Introduction

Thank you for choosing the Ambition Ninja Professional Wireless Tattoo Pen Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.

Ambition Ninja Professional Wireless Tattoo Pen Machine

2. Safety Information

WARNING

• Please be aware of the internal lithium battery's potential fire risk. Do not disassemble, puncture, crush, expose to high temperatures, or dispose of in fire or water.
• For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.

CAUTION

• It is prohibited to modify, disassemble, or repair products without authorization.
• Read these instructions carefully and retain them for future reference.
• Protect the product from exposure to extreme temperatures, direct sunlight, or humid environments.
• Do not place the product near heat sources (e.g., radiators, stoves) as the surface may become hot.
• This product is intended to be used in dry areas only.

Environmental Safety

• No ordinary discarding. Classified and recycled according to the EU WEEE directive.
• Batteries are recycled separately; do not throw them into fire/water.

NOTICE

• Avoid liquid contact with the sensor or electronic components.
• Do not use harsh chemicals or abrasive cleaners.
• Product is not intended for use on hard surfaces, only soft surfaces.

Explanation of Symbols

• Direct current (DC): Indicates the device operates on direct current.
• USB plug: Indicates a USB connection port.
• CE: This symbol indicates compliance with European Union health, safety, and environmental protection standards (ENIEC 55014-1:2021, EN IEC 61000-3-2:2019+A1:2021+A2:2024, IEC 62321-3-1:2013, IEC 62321-7-1:2015&IEC 62321-7-2:2017).
• UKCA: This symbol stands for "United Kingdom Conformity Assessed" and confirms compliance with UK market regulations.

3. Product Overview

The Ambition Ninja is a professional wireless tattoo pen machine featuring a powerful coreless DC motor and a digital display for precise control.

Key Features:

• Direct drive system for powerful, precise, and low-noise operation.
• Ergonomic grip design for comfortable use.
• High-capacity 2000mAh battery for extended operation.
• Adjustable voltage with 0.1V increments.
• Compatible with major tattoo cartridges.
• Wireless and wired operation modes.

Wireless Tattoo Pen Machine with detachable battery

Internal view of the Coreless Motor

Components:

Typical components included in a kit: Wireless machine, USB-C cable, RCA adapter, repair parts kit, travel storage bag.

Control Panel:

Control panel with Voltage Reduction Key (-), Switch (O), Voltage Increase Key (+), and Digital Display.

4. Specifications

Detailed specifications including battery life and motor details

Dimensions and weights of the machine and its components

5. Setup

5.1 Charging the Battery

1. Connect the provided USB-C charging cable to the machine's charging port.
2. Connect the other end of the cable to a 5V/2A charging adapter (not included).
3. The LED display will show the charging status. A full charge (4 divisions) typically takes about 2-2.5 hours.
4. Important: Do not completely drain the battery before charging, as this can damage the battery.

Battery capacity, charging time, and battery life information

5.2 Assembling the Machine

1. Ensure the machine is powered off.
2. Attach the desired battery pack (long or short) to the main body of the machine by screwing it securely.
3. Insert a compatible tattoo cartridge into the grip. The machine is designed to be compatible with major tattoo cartridges.
4. Adjust the needle length using the click adjust system by rotating the grip.

Illustrating the Click Adjust System for needle length

5.3 Switching Stroke Length (if applicable)

The machine comes with a 4.0mm stroke eccentric installed and an extra 3.5mm stroke eccentric. To change the stroke:

1. Carefully disassemble the motor housing to access the eccentric cam.
2. Replace the installed eccentric with the desired 3.5mm eccentric.
3. Reassemble the machine securely.

Direct drive system highlighting stroke length

6. Operation

6.1 Power ON/OFF

• To Power ON/OFF: Long press the "O" key for 3 seconds.

6.2 Start/Pause Output

• To pause output: Short press the "O" key.
• To resume output: Short press the "O" key again. The machine will resume at the working voltage before the pause.

6.3 Adjusting Output Voltage

• To adjust voltage: Press the "+" or "-" key.
• Short press: Adjusts the voltage by 0.1V with each press.
• Long press: Adjusts the voltage by 0.5V with each press.
• The LCD display will show the current output voltage and remaining battery usage.

6.4 Recommended Working Voltages

• Recommended line working voltage: 8-9V
• Recommended shader working voltage: 6-7.5V

6.5 Wired Operation (Optional)

If the battery runs out, or if you prefer wired operation, the RCA adapter can be used to connect the machine to an external power supply.

The machine supports both wireless (battery) and wired (RCA adapter) operation.

7. Maintenance

7.1 Cleaning

• Always ensure the machine is powered off and disconnected from any power source before cleaning.
• Wipe the exterior of the machine with a soft, damp cloth.
• Avoid liquid contact with the sensor or electronic components.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the finish and internal components.

7.2 Sterilization of Grip

The grip can be sterilized, but caution is advised:

• If sterilizing the grip in a hot air sterilizer (dry heat), be aware that the holder's color may change.
• Soaking the grip in acid may cause the paint to peel off.
• It is recommended to barrier protect the machine and use an elastic bandage for the holder before autoclaving to minimize direct exposure and potential damage.

7.3 Storage

• Store the machine in its travel storage bag in a dry, cool place, away from direct sunlight and extreme temperatures.
• Ensure the battery is partially charged (not fully drained or fully charged) for long-term storage to preserve battery health.

The included travel storage bag helps protect the machine.

8. Troubleshooting

• Loud sound at startup: This is considered normal behavior. The starting voltage needs to be higher to stabilize the motor, similar to other professional tattoo power supplies.
• Eccentric cam comes off: No widespread reports of this issue. Ensure all parts are securely fastened during assembly.
• Needle not pushing / Cartridge issues: Some users have reported issues with the needle not pushing or cartridges not fixing properly. If you encounter this, ensure cartridges are correctly seated and compatible. No specific solution is provided in available Q&A.
• Machine changes sound / strange crackling: Some users report the machine making strange crackling sounds without voltage changes. No specific solution is provided in available Q&A.
• Cartridge makes one stroke and stops: If a cartridge makes one stroke and stops, try removing and reinserting the cartridge.

If you experience persistent issues not covered here, please refer to the official user manual PDF or contact Ambition customer support.

9. User Tips

• Battery Life: The smaller battery typically lasts 6-7 hours at 7-8 volts. Some users report the larger battery lasting 10-12 hours. Battery operating time depends on the working voltage and the size of the cartridge (larger cartridges consume more power).
• Permanent Makeup: The machine may be suitable for permanent makeup, but individual results and preferences may vary.
• Cartridge Compatibility: The machine is compatible with Kwadron cartridges.
• Barrier Protection: For hygiene, it is recommended to use barrier film on the machine and an elastic bandage on the holder.
• Charging: The machine uses a standard Android Type-C charger.

10. Warranty and Support

Ambition warrants that its products will perform efficiently when used by a professional tattoo artist. All machine body components not subjected to normal wear and tear are covered under warranty for the life of the machine.

The motor and battery warranty will be covered for half a year from the date of purchase. Should this product prove to be defective due to manufacturing issues, Ambition will provide free replacement or a refund.

For further assistance or to view the official user manual, please refer to the PDF document: User manual (PDF).