1. Important Safety Notice
- Before turning on the amplifier, ensure the volume knob is set to the minimum (leftmost) position to prevent speaker damage from high output power.
- The amplifier can be powered by a DC 12V-24V power supply. If you purchase the version without a power supply or desire higher output, prepare a high-quality power supply yourself. For optimal performance (100W per channel into 4Ω load), a 24V power supply is recommended.
- Ensure all connections are secure before powering on the device.
- Do not expose the amplifier to water, moisture, or extreme temperatures.
2. Product Overview
The Douk Audio NS-04G PRO is a compact yet powerful Class D digital amplifier designed for HiFi stereo audio systems. It features a robust aluminum alloy chassis and delivers up to 100W+100W output.

Figure 2.1: Douk Audio NS-04G PRO Amplifier Front View
Video 2.1: Official product overview showcasing Douk Audio products, including the NS-04G PRO amplifier.
3. Setup Instructions
Follow these steps to set up your NS-04G PRO amplifier:
- Connect Power Adapter: First, connect the DC power adapter (12V-24V, 5.5mm/2.5mm plug) to the amplifier's DC input jack. Then, plug the power cord into a wall socket.
- Connect Audio Source: Use a high-quality stereo RCA cable to connect your audio device (e.g., TV, CD player, MP3 player, computer, DAC) to the amplifier's RCA input jacks (L for left, R for right).
- Connect Speakers: Connect your passive speakers to the amplifier's banana speaker jacks. Ensure correct polarity (+ to + and - to -) for each channel (L for left, R for right). The speaker terminals use a staggered design for easier connection.

Figure 3.1: Front and Rear Panel Diagram with Connection Points

Figure 3.2: Example Setup with Laptop and Passive Speaker
4. Operating Instructions
- Power On: Ensure the volume knob is at its minimum position. Rotate the volume knob clockwise until you hear a click to turn on the amplifier. The power indicator LED will illuminate.
- Adjust Volume: Slowly rotate the volume knob clockwise to increase the volume to your desired listening level. Rotate counter-clockwise to decrease volume.
- Power Off: Rotate the volume knob counter-clockwise until you hear a click to turn off the amplifier. The power indicator LED will turn off.
5. Maintenance
- Keep the amplifier clean by wiping it with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure proper ventilation around the unit to prevent overheating.
- Avoid placing heavy objects on top of the amplifier.
- Disconnect power when the unit is not in use for extended periods.
6. Troubleshooting
| Problem | Reason | Solution |
|---|---|---|
| Cannot start up | Power adapter isn't connected Power switch isn't pressed/toggled Power adapter is broken | Connect power adapter or restart Press or toggle power switch Use another power adapter |
| No sound output | Audio source isn't connected/mute Volume of amp is minimum Incorrect input mode selected Output shorted or speaker isn't matched | Connect audio source or turn up volume Turn up volume Choose correct input mode Check output or change matched speaker |
| Noise | Poor power adapter Poor cables Poor audio source Poor speakers | Change high-quality power adapter Change shielded audio/speaker cables Use mobile phone to test Change high-quality matched speakers |
| Distortion | Output power exceeds rated output | Turn down the volume of amp/preamp/source |
| Stop working after a while | Exceed rated output power | Reduce volume or check speaker impedance |
7. Specifications
| Parameter | Value |
|---|---|
| Model | NS-04G PRO |
| Max. Output Power | 100W + 100W |
| Chip | TPA3116D2 ×2 |
| Audio Input | Stereo L/R RCA |
| Audio Output | Banana speaker jacks |
| Number of Channels | 2.0 |
| THD | ≤0.1% (1KHz) |
| Frequency Response | 20Hz-20KHz (±1dB) |
| SNR | ≥118dB |
| Input Sensitivity | ≤280mV |
| Speaker Impedance | 4Ω-8Ω |
| Matched Loudspeakers | 3-10 inch, 10-200W |
| Working Voltage | DC 12V-24V (5.5mm / 2.5mm) |
| Dimensions (W*D*H) | 90*108*35mm / 3.54*4.25*1.37in |
| Net Weight | 252g / 0.56lb |
8. User Tips
- Power Supply Impact: The output power is significantly affected by the power supply. While a 19V PSU is sufficient for many bookshelf speakers, larger speakers may benefit from a higher voltage (e.g., 24V) and higher current power supply for maximum output.
- Power Off Sequence: To avoid a 'pop' sound, always turn off the amplifier using its volume dial (rotating counter-clockwise until it clicks) before disconnecting the AC adapter or turning off the main power source.
- Volume Control: The amplifier can produce significant volume with just a small turn of the knob. Adjust gradually to find your desired level.
- Speaker Compatibility: This amplifier is capable of driving a wide range of passive speakers, including those rated up to 250W, delivering clear sound without distortion.
9. Warranty and Support
This product comes with a 2-year warranty from the date of purchase.
Contact Information:
Address: Room 1329, Wang Cheng Building, Long Guan street, Long Hua new District, Shenzhen, Guang Dong, China
Contact: LIU CHENXI
Tel: +86-18570015672
Email: nobsound@doukaudio.com